AutoCad :: Why Scalelistedit Has Stopped Working
Jan 25, 2013why my scalelistedit has stopped working and how i can recover it to make it work again
View 3 Replies
ADVERTISEMENT
AutoCad 2D :: Scalelistedit Not Working
Apr 30, 2013All my drawings have loads and loads of obsolete scales on them. Trouble is, when I run the scalelistedit function, Autocad 2008 comes up with the following message:
'Unhandled exception has occurred in a component of your drawing.If you click continue, the application will ignore this error and attempt to continue.Index was outside the bounds of the array.'
This is driving me nuts because I don't know what this means and the long scale list is slowing down my work (especially when I 'copy-paste' bits of drawing from one autocad file to another.get my scalelistedit function working again!
Lightroom :: 3.3 Stopped Working Will Not Even Open / Says - LR Stopped Working And Closes
Jan 1, 2013Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedAutoCAD LT :: 2013 Has Stopped Working
Nov 28, 2012Let me know the solution for Getting "AutoCAD LT has Stopped working" while attempt to print in HP Laserjet M1536 dnf MFP Printer. I have tried the following steps but still i am getting the same Error.
1.Graphics Driver has been updated.
2.Printer Driver has been completely removed and reinstalled.
3.New configuration for this printer has been added.
4. AutoCAD LT 2013 Service Pack 1.1 has been installed.
System configuration: Win 7 -64 bit,4 GB ram, Intel-i3 2120 processor, Intel(R) HD Graphics.
AutoCad :: Macros Have Stopped Working
Jan 31, 2014All of a sudden, my action macros aren't working. I'm getting "Unknown command" errors. I've checked my options, everything's pointing to the right folder, and the macro files are in the right folder. Why would I be getting this error?
View 4 Replies View RelatedAutoCAD 2013 :: Application Has Stopped Working
Jan 19, 2013All of a sudden I got this window when starting AutoCAD:"AutoCAD Application has Stopped working..A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available."
I'm using v2013 on a desktop with Windows 8..I have been using the program since I got this new system in November without a hitch On sunday I had a nasty virus -Today I had to uninstalled AutoCAD and re-installed it and it worked good.After I closed it and went to open the application again I got the MESSAGE again
AutoCad :: Snap To Grid Stopped Working?
Apr 25, 2012Snap to grid stopped working. I am reasonably sure I did something as it was working fine a few days ago.
View 8 Replies View RelatedAutoCad :: Editing Functions Stopped Working?
Jul 1, 2012I was working normally in a drawing (ACAD 2012, 32b) file when, without any apparent reason, I tried to delete something and it didn't work. The way I work is that I select first and then press the "delete" key.
Now, when I do this, absolutely nothing happens. The objects remain selected. While trying to figure out what was happening, I discovered further disruptions. For example, when I select and object and then right-click, instead of showing me the edit shortcut menu, it repeats the last command. I know what you are thinking, but I already verified the right-click customizations and it is correctly set to "shortcut menu" in the "edit mode".
Finally, when I double click on a text, it won't edit as expected; again, nothing happens. Ane yes, in "Options/Windows standard behaviour" the "Double click editing" options is selected.
All the above has it's way around: the "erase" command works, the "ddedit" text works, etc. But it slows me down horribly.
AutoCad :: CTRL+Z Has Stopped Working As Undo
Mar 22, 2012I'm currently using Civil 3D 2012, and all of a sudden CTRL+Z has stopped working as UNDO. It does nothing. I've found this issue in lots of other outdated forum posts, but none seem to relate to Civil 3D 2012. I went into CUI to see if the shortcut was somehow changed, but the UNDO command still points to CTRL+Z as its shortcut.
View 7 Replies View RelatedAutoCAD Civil 3D :: 2012 GE Stopped Working
Oct 28, 2013I get this dialog and I have the lates GE just reinstalled
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD 2013 :: Autodesk Component Has Stopped Working
Aug 7, 2013Every time i try and open Autocad 2013 when checking the licence it comes up with an error ( Autodesk component has stopped working).
View 1 Replies View RelatedAutoCAD Civil 3D :: Express Tools Stopped Working?
Apr 20, 2012I recently did a repair on my C3d 2012 (whcih didn't fix the problem, but I found out what that was and sorted it another way.)
I now find that all express tools commands give me the command unknown error.
I have checked in the cui and the Express tools ARE loaded. I tried unloading and reloading acermain.cuix without success.
I tried adding features from the control panel, but express tools do not show in the list.
I checked the text window after I first opened C3d and it definitely lists that it has loaded express tools yet they do not work.
I tried typing expressmenu in the command line, but it says command unknown.
edit - I tried resetting acetmain.cuix and got the following error:
Unhandled exception has occurred in a component in your application. If yu click continue the application will ignore this error and attempt to continue.
Unable to cast object of type 'Autodesk Autocad Customization CUIUnresolvedCUIFileNode to type Autodesk Autocad Customization CUIPartialCUIFilenode'
AutoCAD Civil 3D :: 2013 Stopped Working Crash?
May 31, 2012Getting an "AutoCAD stopped working" message then system crash while working in AutoCAD Civil 3D 2013.
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Rule Stopped Working?
Aug 12, 2013I have a rule in iLogic that I was testing as "Straight VB.Net" on various assemblies. It was working alright, but I was making some minor tweaks to eliminate errors. Now, all of a sudden, it is unresponsive. Completely. No errors, no "busy" symbol over my pointer, just nothing. I put in the line MsgBox("Begin") as the first line of the program to see if it was even getting into it, and still there is no response. I run the rule, and absolutely nothing happens. I tried writing it in iLogic instead, and that does make something happen. what might cause the VB.Net element of iLogic to stop working, and hopefully how to correct the problem as well?
View 2 Replies View RelatedAutoCad 2D :: Dynamic Input Options Stopped Working
Mar 9, 2012One minute it was working, and then suddenly I can not use the "down arrow" to access the additional dynamic input options. It must be a profile setting, because it works in all my other profiles.
How to turn it back on?
Dynamic Input options.JPG
AutoCAD 2013 :: Deselecting By Shift+Click Stopped Working?
Oct 29, 2013A while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.
View 4 Replies View RelatedAutoCAD 2010 :: Double Click Editing Has Stopped Working?
Apr 16, 2012As of yesterday Double click editing has stopped working. CUI says everything is OK.
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Event Triggers Stopped Working?
Jul 31, 2013So the other day I set up an external rule and created an event trigger to run the rule on save. It worked great ... for a couple days, and then it just stopped working yesterday. I can still run the rule manually and it works fine, but it doesn't seem to run automatically anymore on file save. Yes, iLogic is set to Loaded / Automati in the add-ins panel.
(on the iLogic rule attachment, remove .TXT from the end. I had to add that due to the board's rules about file types.)
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
AutoCAD 2013 :: Error Message / Component Has Stopped Working
Apr 30, 2013Reference Manager crashing when starting.
Error message states: AutoCAD component has stopped working.
AutoCAD 2013 :: Break At Point Suddenly Stopped Working?
Aug 13, 2012i was using autocad 2013 without any trouble, i used break at point two times, after that i modified some layers and i think that nothing else, and the command break at point stopped working, when i press it it automatically uses the command break. what is going on?
View 8 Replies View RelatedAutoCAD Civil 3D :: Storm And Sanitary Sewer Analysis Stopped Working
Aug 30, 2011I tried to open the Storm and Sanitary Sewer analysis program and got an error message. The error message asked me to send a report but the report was rejected.
View 8 Replies View RelatedPhotoshop :: Why 6.0 Stopped Working
Feb 28, 2013And before you say "It's because it's 14 years old", know that it was working perfectly until about two months ago.
I have a Windows 7 laptop with 4GB memory, plenty of HD space, and no other PC issues.
Photoshop :: CS4 / CS5 Has Stopped Working?
Dec 15, 2012My Photoshop CS4 and CS5 shows "Photoshop has stopped working" . Whereas I have Windows 7 64bit, 6GB RAM, 512MB Graphics Card.
Earlier I worked in this version. But after formating my conputer I could not do anything with only in Photoshop. First I installed Photoshop CS4 it was failed to work then install Photoshop CS5..It also failed to work.
Photoshop :: CS6 - CC Has Stopped Working?
Oct 3, 2013I updated Photoshop CC about 7 days ago. Before that it worked fine, since then I have been using Photoshop CS6 for some work (CC left it there when it installed) but yesterday I wanted to go to Photoshop CC from Lightroom 5.2 and Photoshop CC hung. Rebooted computer and tried to open Photoshop CC but it crashes on initialization.
As interim measure I installed PS CS6 as an optional external editor in Lightroom, but I would like to use Photoshop CC again one day!
Photoshop :: CS Has Stopped Working
Jun 28, 2013Yesterday, I tried to start up Photoshop, but it got halfway through initializing and stopped, flashing a message: "Adobe Photoshop CS5.1 has stopped working." I shut down the computer and tried again, but it repeated three or four times.
So I uninstalled the program. Upon reinstallation, installation failed and the computer said: "Your installation encountered errors. Please try restarting your system and installing again. Exit Code: 20."
Photoshop :: CS6 Has Stopped Working
Sep 30, 2013I have been using my program since June without issue. Suddenly it stopped working. I can open the program but it will not create a new file or open an existing file. If I "open with" from windows explorer it won't open either. I have uninstalled and reinstalled the program and I'm still not having any luck.
View 1 Replies View RelatedCorelDRAW X6 :: 64-bit Has Stopped Working
Mar 4, 2013After installing X6 I get this problem...CorelDraw X6 (64-bit) has stopped working.
Problem signature:
Problem Event Name:APPCRASH
Application Name:CorelDRW.exe
Application Version:16.1.0.843
Application Timestamp:4fff8c8c
Fault Module Name:clr.dll
Fault Module Version:4.0.30319.261
Fault Module Timestamp:4ec9f666
Exception 80131506
Exception Offset:000000000040b383
OS Version:6.1.7601.2.1.0.768.3
Locale ID:7177
Additional Information 1:6d4f
Additional Information 2:6d4fcafc156cca63b72c0a4deac1b33d
Additional Information 3:844e
Additional Information 4:844ec7b1bf08d736261a9cce2c2795aa
Photoshop :: CS3 Has Stopped Working
Feb 23, 2009I get an error message from windows vista premiumm home.
It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.
Lightroom :: 64-bit Has Stopped Working
Mar 27, 2014After recently installing LR 5 today this message starting appearing. I cannot get around it.
View 2 Replies View RelatedAutoCAD 2010 :: SCALELISTEDIT Dialog Box Not Visible?
May 19, 2011Anytime I try to add a custom scale either by selecting the "custom scale" option from the paperspace viewport scale menu or by entering the command SCALELISTEDIT manually, the dialog box doesn't appear.
It's not that the box isn't opening because all other buttons and functionality are restricted in AutoCAD until I hit escape to exit out of the command. It's as if it's opening on a separate monitor, except it doesn't appear on my secondary monitor when I plug it in either.
Is there a command where I can manually add a custom scale or a property that I can change to force the box to be docked?
AutoCAD Architecture :: Scalelistedit Affecting AEC Content
Aug 31, 2011I have 2 files, A100 and C100, with C100 being xrefed into A100. Both have a few other xrefs in them, being used for whatever reasons, and must stay.If you open either file without the other being present, they open fine, but if they can find each other there's a 20-40 minute lockup.
C100 being a civil drawing, I thought the problem was one of the missing .shx files. So after spending countless hours trying to track it down, I finally noticed a warning when trying to open the files together that C100 had 2200+ scale lists. Using 2008 in the office, scalelistedit gives a runtime error, as well as the 2008 install at home. Using 2010, scalelistedit is successful in solving my 20-40 minute problem. (I did save back down to 2007..)
Now, back in 2008, the Style Manager won't open, as it says there is content from a newer version in the file. Also, any xrefs with AEC content, walls etc, come in without displaying said content.