I tried to open the Storm and Sanitary Sewer analysis program and got an error message. The error message asked me to send a report but the report was rejected.
View 8 RepliesIn Civil3d 2012 when the Edit in Storm and Sanitary Analysis command is used to send a Civil3d pipe network and Catchment areas to SSA the program appears to open as expected with the "Create New Project" dialogue box displayed.
When the Create New Project prompt is accepted nothing is displayed in the SSA plan view.
But.... If I go to the SSA File pulldown menu the .spf project file is available and when it is selected a dialogue box is displayed indicating that the Background file(the dwg) file cannot be found and do we want to search for it "Yes/No".If No is selected the pipe network is displayed as expected.
If Yes is selected and the dwg file located and selected then the pipe network is displayed as expected but the background file looks like proxy objects.
Civil3d2012
Win7 64bit
NVidia Quadro2000M
Using Storm and Sanitary Analysis from a wastewater industry model? I have been looking into that but have run into a problem regarding units (using metric units). When importing data from wastewater industry model into SSA it assumes that pipe dimensions are given in meters and subbasins area are given in ha. My data is in mm and sqr.m.
Can I define what units to use when importing this data??
If I import GIS data (shp files) I can define what units the data is in.
Using 2013 versions of Map and SSA.
I have a master plan development that I am trying to model different wastewater flows scenerios for I am basically following this paper from AU 2011 [URL] but have a couple of issues I am trying to work around.
Basically I want to take a spreadsheet of flows determined for specific nodes and upload it into SSA quickly from the paper
I can see that you can write a shp file of the network and then add different flow scenerios to the .dbf file and them use the GIS import function of SSA to get the flows assigned in one hit.
The issue I have however is that my network is a prelimary design in Civil3d as pipes and structures and if I create a .sdf of the network and then.shps from that data I do not get the structure sump elevations, this is not something that created in the shp file export process,
To work around this I through maybe I could export the network from Cicil3d to SAA which gies me all the strucutres with the correct sump levels and then also create a .shp and .dbf file and add the flows and them do a GIS import of just the structures and merge them with the exisiting network as the structure names as exactly the same and therefore the gis import should find the correct structures.
However SSA does not and adds a second lot of nodes with the same structure name but with Junction in the front.
I am working on modeling a pond riser. I had one model with a series of small round perforations in the riser and I needed to look at a version that used larger, square cut-outs in the riser. So, I performed a "save-as" and adjusted my orifices to match my new model requirements. When I attempted to run the model, I received the following error: "ERROR 537 : Unable to perform multiple storm analysis, no storm was selected.".
I have encountered this one time before and was able to go back to the first model and start over. However, now, even when I run the first model (small round perfs), I receive the same error.
I have a storm event assigned for both models but the program does not seem to recognize this any longer.
Setting up my styles for Sanitary Sewer and most counties require a Deflection Angle for your sewer mains.
Any formula to use to show Rt or Lt deflection pipe angles in the Sanitary Sewer plan view Structure Lable Style or how to create one?
Have not found anything that works, the Structure rotation Angle doesn't work at all like that.
I need to model a diversion manhole in a storm sewer system. The diversion will take X cfs from the system and send it to a water quality treatment facility. After leaving the WQ facility, it will be returned to the storm sewer system at the next manhole downstream.
I tried in Hydraflow but it doesn't look like diversions are possible. Thought about modeling up to the diversion manhole and taking that data into some other program, and then coming back into a second Hydraflow model that handles the downstream bit.
Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedAs I know we can import and export storm and sewer pipe lines between C3d and SSA. But how about open channels? I am workin on a project which is contain sewer pipes (close sections like circle pipes) and open channels(maybe as corridor in C3d) and some ditches with irregular sectios. it is pretty easy to define assemlies for open channels and ditches in C3d but if we can not pull the in SSA in order to analyze then we need to do the job twise in both software. I've tried to pull my network into SSA. but it just import pipe networks not open channels. is there any way to import them or any other software that can import from C3d and analyse the network?
View 4 Replies View RelatedI am having issues with importing / updating existing storm network.
The problem is when I update the storm network, All the outlets are added as new structures. It does not update the existing headwall / end sections.
I then have to go thru and delete the added (null) outlet structure. Then, reattach the existing outlets to the pipe network to show up in the structure data table correctly.
I get this dialog and I have the lates GE just reinstalled
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I recently did a repair on my C3d 2012 (whcih didn't fix the problem, but I found out what that was and sorted it another way.)
I now find that all express tools commands give me the command unknown error.
I have checked in the cui and the Express tools ARE loaded. I tried unloading and reloading acermain.cuix without success.
I tried adding features from the control panel, but express tools do not show in the list.
I checked the text window after I first opened C3d and it definitely lists that it has loaded express tools yet they do not work.
I tried typing expressmenu in the command line, but it says command unknown.
edit - I tried resetting acetmain.cuix and got the following error:
Unhandled exception has occurred in a component in your application. If yu click continue the application will ignore this error and attempt to continue.
Unable to cast object of type 'Autodesk Autocad Customization CUIUnresolvedCUIFileNode to type Autodesk Autocad Customization CUIPartialCUIFilenode'
Getting an "AutoCAD stopped working" message then system crash while working in AutoCAD Civil 3D 2013.
View 2 Replies View RelatedLightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedLooking for a reference or example how to design a sewer line in civil 3d.
View 6 Replies View RelatedI opened Hydraflow Sewer Extensions and created a project. I was able to save it and open repeatedly without problems. I opened open project dialogue window here I copied and renamed a copy of the project file. When I tried to open either the original file or the renamed version - Hydraglow shuts down. The project file has attached dxf file as abackground. (see attached). I hate to lose a day of data entering given my tight deadlines.
View 3 Replies View RelatedI think that our file has been corrupted. We tried to adjust the elevation of a 6-inch sewer pipe in the profile and then the display of the pipe went up to a 12-inch, even though the pipe properties still show it as a 6. All the other pipe sizes seem to be working, though we did have a similar problem with 4-inch pipe the day before and fixed it with an audit. Audit does not fix this problem. It seems to apply to all six inch pipes.
The file was created in Civil 3D 2007. We are now using C3D 2012 with SP1. My machine is 64-bit but the other person working in the file has 32-bit.
I have attached the file and the pipe in question is in the sewer network and is named SP B 11.
Is there any hope for this file? Of course this is right as we are trying to meet a deadline.
PS I tried to add the file but was size restricted, then I trimmed the file down to under 1.5 MB and was still size restricted.
I need creating a view up a storm pipe. We had the inside of a large diameter pipe scanned. Now I need to be able to create a view looking directly up the pipe. Is there a way to set the view so that the what I am seeing is the view from the center of the downstream end of the pipe looking to the center of the upstream end of the pipe?
View 1 Replies View Relatedis there a way to get the drop down highlighted below to give me storm and sanitary instead of just "standard".
View 1 Replies View RelatedI am trying to figure out how big my pipes need to be for a storm sewer that I already have set elevations for. Every time I input the pipe and rim elevations for the network in the data tab it changes the inputs back to saying design. How do I set my own elevations for the pipe network?
View 2 Replies View RelatedI have an issue with headwalls rotating. When I rotate the headwall structure to 90 degrees from the pipe, the structure rotates back automatically. Is there a way to lock the position of the structure?
See jpeg below.
I have set up a table style to display the type of structure, top of casting, and invert in and out elevations. I have also added a column to display the depth (rim to sump height). When the structure is a headwall, no depth is needed; however, the table displays this data as "???". Is there a way to only show depths greater than zero within the table editor for rim to sump height?
View 2 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a storm crossing shown on a road profile, and the ellipse that represents the storm pipe is only showing part of the inner wall (I've attached an image). This pipe is skewed slightly, but the entire pipe crosses the road alignment, and this should not make any difference.
Also, is there any way, yet, (I'm using C3D 2011) to have the label show not only the pipe name, but also the invert where the pipe crosses the road alignment, and remain dynamic,? In other words, without having to edit the label text, and lose the dynamic capability. Land Desktop would do this, but it was not dynamic, of course.
Win 7 64BIT
C3D 2013
Typically when we have station offset for a storm structure shown to center of structure. How do you handle station offset with a storm structure label for say back of curb.
View 3 Replies View RelatedI've attached an image of a storm drain invert label for a storm drain profile. As you can see, the middle manhole has all three inflow pipes labeled. Is there a way to only label the inverts of the two pipes shown in the profile view?
C3D 2014
Windows 7 64-bit
I have recieved a survey and I am now ready to begin my design. BUT, when I try and create a "pipe network", I am unable to connect the plan view with the profile. I have everything on both the plan and profile (water, sanny, gas, cuvlerts, etc etc) which was provided by the surveyor.
How to modify pipe network into an existing survey to transpose/connect in profile and plan views.
How to calculate Hydraflow Storm Sewers Extension by way of Importing DXF Plan Layouts?
View 5 Replies View RelatedI am using Inventor 2009 professional and I have to run a stress analysis on a beam. I put the constraints and the forces I need and when I hit the calculate button, the results so up, but when I click on the results, nothing appears. I need to run this calculation and do not want to resort to hand calculations.
View 9 Replies View RelatedI have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
[URL]
I have a user who has a problem with creating meshes in the Inventor Stress Analysis environment. When trying to create meshes in assemblies (after clicking the Mesh View button), the Mesh progress meter gets to about 80% done, then backs up a step, then never moves forward after that. He has let it run all night and no further progress is made. I noticed that the FEAComputeServer.exe process uses 25% to 50% of the CPU usage until about a minute after the mesh progress meter stops. Then the FEAComputeServer.exe CPU usage drops to zero.
The odd thing is that this is happening on only 1 computer. The exact same assemlies can be meshed without problems on his laptop and my computer. We have tried the following to solve the problem:
1. Adjusted Mesh Settings to various values.
2. Both Inventor 2014 SP1 and Update 1 for SP1 are installed
3. Updated the video driver. Video card is a NVIDIA Quadro 4000. Video driver is version NVIDIA's 331.65 WHQL certified ODE driver.
4. Uninstalled and reinstalled all Autodesk products using the procedure at [URL]
5. As part of the uninstall, we also removed MS .NET Frameworks and C++ Redistrubutables so that the Autodesk installer would install it's preferred flavor of these utilities.
6. Reinstalled SP1 and Update 1 for SP1.
Since the issue is happening on just 1 computer, I don't think the issue is related to the part geometry itself. The only other thing I can think of that could cause this is just bad hardware.