AutoCAD Civil 3D :: Hydraflow Sewer Extensions
Jan 17, 2013
I opened Hydraflow Sewer Extensions and created a project. I was able to save it and open repeatedly without problems. I opened open project dialogue window here I copied and renamed a copy of the project file. When I tried to open either the original file or the renamed version - Hydraglow shuts down. The project file has attached dxf file as abackground. (see attached). I hate to lose a day of data entering given my tight deadlines.
View 3 Replies
ADVERTISEMENT
Apr 19, 2013
Looking for a reference or example how to design a sewer line in civil 3d.
View 6 Replies
View Related
Jan 3, 2013
I need to model a diversion manhole in a storm sewer system. The diversion will take X cfs from the system and send it to a water quality treatment facility. After leaving the WQ facility, it will be returned to the storm sewer system at the next manhole downstream.
I tried in Hydraflow but it doesn't look like diversions are possible. Thought about modeling up to the diversion manhole and taking that data into some other program, and then coming back into a second Hydraflow model that handles the downstream bit.
View 2 Replies
View Related
Apr 16, 2013
how can i change the value for Q (cms) in hydraflow i want to give the value for first pipe and for the others it should automatically calculate.
View 1 Replies
View Related
Dec 12, 2012
I have a master plan development that I am trying to model different wastewater flows scenerios for I am basically following this paper from AU 2011 [URL] but have a couple of issues I am trying to work around.
Basically I want to take a spreadsheet of flows determined for specific nodes and upload it into SSA quickly from the paper
I can see that you can write a shp file of the network and then add different flow scenerios to the .dbf file and them use the GIS import function of SSA to get the flows assigned in one hit.
The issue I have however is that my network is a prelimary design in Civil3d as pipes and structures and if I create a .sdf of the network and then.shps from that data I do not get the structure sump elevations, this is not something that created in the shp file export process,
To work around this I through maybe I could export the network from Cicil3d to SAA which gies me all the strucutres with the correct sump levels and then also create a .shp and .dbf file and add the flows and them do a GIS import of just the structures and merge them with the exisiting network as the structure names as exactly the same and therefore the gis import should find the correct structures.
However SSA does not and adds a second lot of nodes with the same structure name but with Junction in the front.
View 1 Replies
View Related
Oct 11, 2013
I think that our file has been corrupted. We tried to adjust the elevation of a 6-inch sewer pipe in the profile and then the display of the pipe went up to a 12-inch, even though the pipe properties still show it as a 6. All the other pipe sizes seem to be working, though we did have a similar problem with 4-inch pipe the day before and fixed it with an audit. Audit does not fix this problem. It seems to apply to all six inch pipes.
The file was created in Civil 3D 2007. We are now using C3D 2012 with SP1. My machine is 64-bit but the other person working in the file has 32-bit.
I have attached the file and the pipe in question is in the sewer network and is named SP B 11.
Is there any hope for this file? Of course this is right as we are trying to meet a deadline.
PS I tried to add the file but was size restricted, then I trimmed the file down to under 1.5 MB and was still size restricted.
View 3 Replies
View Related
Aug 30, 2011
I tried to open the Storm and Sanitary Sewer analysis program and got an error message. The error message asked me to send a report but the report was rejected.
View 8 Replies
View Related
Nov 7, 2013
New user for civil 3d and the hydraflow extension for civil 3d. I have my pipe network created, all the correct catchments are attached to the correct basin/inlet. i have opened my network in hydraflow and am ready to run it. when I click run it says no flow. Now I know there is another step i need to set my flow wth TOC, I've inputted that, i am using the standard idf curve hydraflow, i have the areas with their coefficients, however it is not calculating my flow rather it is telling me no flow is inputted for certain lines i.e. the ones with MH connections and no inlets.
I have attached my .stm file to this thread, i changed the extension so it would post, just delete the .doc from the extension and it should work in your hydraflow.
View 3 Replies
View Related
Jul 15, 2013
Setting up my styles for Sanitary Sewer and most counties require a Deflection Angle for your sewer mains.
Any formula to use to show Rt or Lt deflection pipe angles in the Sanitary Sewer plan view Structure Lable Style or how to create one?
Have not found anything that works, the Structure rotation Angle doesn't work at all like that.
View 4 Replies
View Related
Dec 13, 2012
I can't seem to confirm the discharge table that hydraflow produces in hydraflow hydragraphs. I think I understand the equation itself (it's been a while since I took hydraulics), but can't understand where I'm making my error (if I am). Normally I trust the stage/discharge curve that hydraflow produces, but the City Engineer is asking me to confirm the values by hand and show them on the plans. Is there a link to an detention pond example that shows how a curve (the outflow values) was generated (confirms the discharge table at various elevations)? The equation is on page 85 of the users manual.
View 1 Replies
View Related
Oct 31, 2012
I'm having an issue with my Hydraflow model where the HGL and EGL drops suddenly to 0 in the upstream pipes. What might be causing this? Picture attached.
View 1 Replies
View Related
Feb 11, 2013
I am running Civil 3D 2012 and my Hydraflow crashes everytime I run an analysis. I am using a known Q and have input pipe inverts/slopes and pipe sizes. Everytime I try running an analysis I get the following message: Line 1, 2, 3 has no flow. Check pipe size(s) and slope(s). Then the program closes up.
View 1 Replies
View Related
Oct 27, 2012
Is there anyway that a tidal flap valve fitted to a culvert outlet can be modeled in Hydraflow Express Culverts.
View 1 Replies
View Related
Jun 19, 2013
one would think that you could just export the .stm file into hydraflow, make some changes, and import, and all would be fine. when i export, all of the structures in hydraflow come up as drop curb. how can they come in as what they actually are.. aka, when the part i use is a 2x4 box, it should come into hydraflow as a "grate inlet", or a st-mh will come in as a "manhole".
and then likewise, when the changes are made, and its brought back into autocad, they all come in as a "standard" style. except the outfalls, which show as a "standard" style, but come in with a different block, and get a whole new label (outfal - x)
View 3 Replies
View Related
Oct 30, 2008
When I try to run my hydrographs through a pond I get an error stating something to the effect of: Outflow greater than Inflow on Hydrograph 6 for the 50-yr storm.
How can the outflow be greater than what is flowing into it? How the program can calculate this.
View 5 Replies
View Related
Nov 14, 2012
We are seeming ot have problems with a few of our engineers having the Microsoft Office product go to "Not Responding" and then closing while working in Hydraflow & Hydrographs. This has been with Outlook, Word and Excel. All workstations are 64 bit systems with 16 gig of Ram Windows 7 and Civil 3D 2012 SP2.1.
View 2 Replies
View Related
Dec 22, 2011
I'm trying to model the under drain system of a synthetic turf field in Hydraflow.
View 1 Replies
View Related
Jun 24, 2013
How to calculate Hydraflow Storm Sewers Extension by way of Importing DXF Plan Layouts?
View 5 Replies
View Related
Nov 20, 2013
Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies
View Related
Oct 15, 2012
I am just starting to use C3D 2013, and have just finished creating a new template for use in 2013 by importing the styles from our 2012 template. I am having an issue with an alignment style. The problem is that every line extension after the first one ends up being on the same layer as the curve (see attachment). They are supposed to be on a seprate layer as they were in our 2012 template.
View 1 Replies
View Related
Aug 21, 2013
I am having issues with importing / updating existing storm network.
The problem is when I update the storm network, All the outlets are added as new structures. It does not update the existing headwall / end sections.
I then have to go thru and delete the added (null) outlet structure. Then, reattach the existing outlets to the pipe network to show up in the structure data table correctly.
View 1 Replies
View Related
Jun 13, 2011
I have been trying to export an autocad sewer map and import it into gis. I dont know the best way to go about this and bring along some intelligence to gis.
This autocad dwg has no real intelligence in it.I can make shp files in autocad, that seem to work of for lines, I can do a data extraction for points and texts and import the spread sheets, that works too. I want to minimize the amount of editing we will need to do to the new map in gis by importing the line sizes, pipe type from cad.
I want to simplify the updating process also.
View 5 Replies
View Related
Jun 15, 2009
When I try to open any of the Hydraflow extensions, I get the following message: "Installation error Invalid installation. Program ending." I ran a repair from Windows, but get the same result. How to successfully open/use any of these Hydraflow components in 2010?
View 6 Replies
View Related
Oct 16, 2013
I cannot get pscc to access servers to download extention not even Kuler, i am trying to add on album DS
View 1 Replies
View Related
Jun 29, 2013
On OS X Mountain Lion the Photoshop Extensions Sub-Menu in CC is grey when I first launch. I believe this is the same as in CS5. But I think it is non-the-less a bug, because the delay in making that window available makes it appear that MiniBridge is not available, unless I wait and then come back to the menu.
View 5 Replies
View Related
Jun 17, 2013
None of my Adobe Extensions migrated. What do I do?
View 4 Replies
View Related
Feb 27, 2013
what is the difference between Photoshop CS6 and extensions?
View 3 Replies
View Related
Oct 13, 2013
I have purchased filter extensions for photoshop cs6 in the creative suite. they download but fail to install with the error message "failed to install. close extension manager and try again". i have tried again so many times but there are 2 that just won't load.
View 1 Replies
View Related
Dec 4, 2008
I have added about 30,000 extensions just to have a nice healthy choice of design options; however, now PS takes about 5 minutes to load. Since the .atn, etc. files have to be placed in the Presets area of the local installation in order to be loaded into the various palettes,
View 20 Replies
View Related
Sep 8, 2008
Does anyone know any photoshop tutorials that involve extending the length of a persons hair? I've been looking all over for such a technique, but to no avail.
View 5 Replies
View Related
Jan 7, 2013
I have 3d Max 2012, but I can't open files with extensions .bip and .fig, How do I open it?
View 3 Replies
View Related
