AutoCAD Civil 3D :: Edit In Storm And Sanitary Analysis-Drawing Underlay Is Missing?
Oct 12, 2011
In Civil3d 2012 when the Edit in Storm and Sanitary Analysis command is used to send a Civil3d pipe network and Catchment areas to SSA the program appears to open as expected with the "Create New Project" dialogue box displayed.
When the Create New Project prompt is accepted nothing is displayed in the SSA plan view.
But.... If I go to the SSA File pulldown menu the .spf project file is available and when it is selected a dialogue box is displayed indicating that the Background file(the dwg) file cannot be found and do we want to search for it "Yes/No".If No is selected the pipe network is displayed as expected.
If Yes is selected and the dwg file located and selected then the pipe network is displayed as expected but the background file looks like proxy objects.
Civil3d2012
Win7 64bit
NVidia Quadro2000M
View 9 Replies
ADVERTISEMENT
Aug 30, 2011
I tried to open the Storm and Sanitary Sewer analysis program and got an error message. The error message asked me to send a report but the report was rejected.
View 8 Replies
View Related
Aug 12, 2013
Using Storm and Sanitary Analysis from a wastewater industry model? I have been looking into that but have run into a problem regarding units (using metric units). When importing data from wastewater industry model into SSA it assumes that pipe dimensions are given in meters and subbasins area are given in ha. My data is in mm and sqr.m.
Can I define what units to use when importing this data??
If I import GIS data (shp files) I can define what units the data is in.
Using 2013 versions of Map and SSA.
View 5 Replies
View Related
Nov 21, 2013
I am working on modeling a pond riser. I had one model with a series of small round perforations in the riser and I needed to look at a version that used larger, square cut-outs in the riser. So, I performed a "save-as" and adjusted my orifices to match my new model requirements. When I attempted to run the model, I received the following error: "ERROR 537 : Unable to perform multiple storm analysis, no storm was selected.".
I have encountered this one time before and was able to go back to the first model and start over. However, now, even when I run the first model (small round perfs), I receive the same error.
I have a storm event assigned for both models but the program does not seem to recognize this any longer.
View 3 Replies
View Related
Nov 10, 2013
As I know we can import and export storm and sewer pipe lines between C3d and SSA. But how about open channels? I am workin on a project which is contain sewer pipes (close sections like circle pipes) and open channels(maybe as corridor in C3d) and some ditches with irregular sectios. it is pretty easy to define assemlies for open channels and ditches in C3d but if we can not pull the in SSA in order to analyze then we need to do the job twise in both software. I've tried to pull my network into SSA. but it just import pipe networks not open channels. is there any way to import them or any other software that can import from C3d and analyse the network?
View 4 Replies
View Related
Aug 21, 2013
I am having issues with importing / updating existing storm network.
The problem is when I update the storm network, All the outlets are added as new structures. It does not update the existing headwall / end sections.
I then have to go thru and delete the added (null) outlet structure. Then, reattach the existing outlets to the pipe network to show up in the structure data table correctly.
View 1 Replies
View Related
Dec 12, 2012
I have a master plan development that I am trying to model different wastewater flows scenerios for I am basically following this paper from AU 2011 [URL] but have a couple of issues I am trying to work around.
Basically I want to take a spreadsheet of flows determined for specific nodes and upload it into SSA quickly from the paper
I can see that you can write a shp file of the network and then add different flow scenerios to the .dbf file and them use the GIS import function of SSA to get the flows assigned in one hit.
The issue I have however is that my network is a prelimary design in Civil3d as pipes and structures and if I create a .sdf of the network and then.shps from that data I do not get the structure sump elevations, this is not something that created in the shp file export process,
To work around this I through maybe I could export the network from Cicil3d to SAA which gies me all the strucutres with the correct sump levels and then also create a .shp and .dbf file and add the flows and them do a GIS import of just the structures and merge them with the exisiting network as the structure names as exactly the same and therefore the gis import should find the correct structures.
However SSA does not and adds a second lot of nodes with the same structure name but with Junction in the front.
View 1 Replies
View Related
Jul 15, 2013
Setting up my styles for Sanitary Sewer and most counties require a Deflection Angle for your sewer mains.
Any formula to use to show Rt or Lt deflection pipe angles in the Sanitary Sewer plan view Structure Lable Style or how to create one?
Have not found anything that works, the Structure rotation Angle doesn't work at all like that.
View 4 Replies
View Related
Mar 17, 2013
How can convert PDF underlay into actual autocad 2010 drawing / layer ? PDF file can be opened in autocad 2010 in PDF underlayer.It could be convert into separate lines / individual lines etc...
View 6 Replies
View Related
Feb 23, 2012
I was using a 3 MB PDF underlay yesterday and zooming/panning/saving operations were very sluggish.
BTW, when I attach a PDF underlay, AUTOCAD allows me to snap to the lines in the PDF and even measure them. Since it recognizes those lines, is there an easy way to copy the lines from the PDF into the drawing?
View 1 Replies
View Related
Sep 3, 2013
I need creating a view up a storm pipe. We had the inside of a large diameter pipe scanned. Now I need to be able to create a view looking directly up the pipe. Is there a way to set the view so that the what I am seeing is the view from the center of the downstream end of the pipe looking to the center of the upstream end of the pipe?
View 1 Replies
View Related
Apr 10, 2013
I do a lot of estimating and I do my take-offs from the drawings that I get from Isqft. Problem is when you print from Isqft you can't adjust the paper size even though it may be a D size you always print to a E size. So I decided to save the pdfs and insert them into a drawing. Scale doesn't matter here since all I'm doing is getting device counts and making sure device placements are correct. After I insert the pdf in model space and set up my paper space to the size I want I go to plot but the software crashes and shuts down. I've printed pdf's from AutoCAD but never had this problem before.
View 0 Replies
View Related
Mar 16, 2013
How can convert PDF underlay into actual autocad 2010 drawing / layer ? PDF file can be open in autocad 2010 in PDF underlayer.It could be convert into separate lines / individual lines etc...
View 2 Replies
View Related
Feb 8, 2013
is there a way to get the drop down highlighted below to give me storm and sanitary instead of just "standard".
View 1 Replies
View Related
Oct 11, 2012
I am trying to figure out how big my pipes need to be for a storm sewer that I already have set elevations for. Every time I input the pipe and rim elevations for the network in the data tab it changes the inputs back to saying design. How do I set my own elevations for the pipe network?
View 2 Replies
View Related
Jun 26, 2013
I have an issue with headwalls rotating. When I rotate the headwall structure to 90 degrees from the pipe, the structure rotates back automatically. Is there a way to lock the position of the structure?
See jpeg below.
View 1 Replies
View Related
Dec 28, 2012
I have set up a table style to display the type of structure, top of casting, and invert in and out elevations. I have also added a column to display the depth (rim to sump height). When the structure is a headwall, no depth is needed; however, the table displays this data as "???". Is there a way to only show depths greater than zero within the table editor for rim to sump height?
View 2 Replies
View Related
Aug 14, 2013
I have a model with multiple floors. When I am in Level 2, with Level 1 as an Underlay I can still edit walls and other objects from Level 1. I know there is a way to lock the Underlay, I just can't make it work. Pinning the entire Level 1 is not an options, because this is not View dependent.
View 7 Replies
View Related
Jun 25, 2013
I have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 5 Replies
View Related
Apr 16, 2012
I have a storm crossing shown on a road profile, and the ellipse that represents the storm pipe is only showing part of the inner wall (I've attached an image). This pipe is skewed slightly, but the entire pipe crosses the road alignment, and this should not make any difference.
Also, is there any way, yet, (I'm using C3D 2011) to have the label show not only the pipe name, but also the invert where the pipe crosses the road alignment, and remain dynamic,? In other words, without having to edit the label text, and lose the dynamic capability. Land Desktop would do this, but it was not dynamic, of course.
Win 7 64BIT
C3D 2013
View 7 Replies
View Related
Jan 3, 2013
I need to model a diversion manhole in a storm sewer system. The diversion will take X cfs from the system and send it to a water quality treatment facility. After leaving the WQ facility, it will be returned to the storm sewer system at the next manhole downstream.
I tried in Hydraflow but it doesn't look like diversions are possible. Thought about modeling up to the diversion manhole and taking that data into some other program, and then coming back into a second Hydraflow model that handles the downstream bit.
View 2 Replies
View Related
May 8, 2013
I have just installed Inventor 2012 on a clients machine and the stress analysis tab is missing.
View 2 Replies
View Related
Apr 3, 2012
We are working on a file here and the lables on the drawing are missing. We had station offset lables in our drawings and are now missing from the plans.
View 3 Replies
View Related
Feb 8, 2011
Using 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies
View Related
May 18, 2012
Typically when we have station offset for a storm structure shown to center of structure. How do you handle station offset with a storm structure label for say back of curb.
View 3 Replies
View Related
Dec 30, 2013
I've attached an image of a storm drain invert label for a storm drain profile. As you can see, the middle manhole has all three inflow pipes labeled. Is there a way to only label the inverts of the two pipes shown in the profile view?
C3D 2014
Windows 7 64-bit
View 5 Replies
View Related
Feb 8, 2013
I have recieved a survey and I am now ready to begin my design. BUT, when I try and create a "pipe network", I am unable to connect the plan view with the profile. I have everything on both the plan and profile (water, sanny, gas, cuvlerts, etc etc) which was provided by the surveyor.
How to modify pipe network into an existing survey to transpose/connect in profile and plan views.
View 5 Replies
View Related
Aug 27, 2013
I want to edit linetypes from a drawing that I got from a surveyor but do not know where Civil 3D stores the linetypes/*.lin files of externally created drawings.
View 1 Replies
View Related
May 11, 2012
I jost installed Inventor 2013 Premium (PRODUCT DESIGN SUITE) here at the company and I have noticed that there is no "Stress Analysis" button in the Environments Tab. I already checked the "manage Add-Ins" button and there is no Stress Analysis module available in the list of Add-Ins.
Am I reading this wrong or this version may not have a Finite Element Analysis module?
It is strange because in the brochure there is a stress analysis module. Also, in the Environments tab there is an "Optimization" button. What is the purpose of having optimization without having Stress Analysis?
View 9 Replies
View Related
Sep 14, 2013
Does Frame Analysis uses the finite element method?
If it does, how to view/edit the mesh?
View 4 Replies
View Related
Jun 24, 2013
How to calculate Hydraflow Storm Sewers Extension by way of Importing DXF Plan Layouts?
View 5 Replies
View Related