AutoCAD Civil 3D :: Labels On Drawing Are Missing?
Apr 3, 2012We are working on a file here and the lables on the drawing are missing. We had station offset lables in our drawings and are now missing from the plans.
View 3 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Missing Labels On Plot?
Feb 14, 2013i'm having an issue with C3D 2013, i have a plan drawing, with various layouts linked with a sheetset. I'm having trouble when plotting them from the sheet set. It doesn´t plot my alignment labels. Also happening on some other drawings like plan and profile. If i do plot them one by one from the drawing, they plot fine. The problem is that it's a lot of drawings to be ploting one layout at a time...
View 2 Replies View RelatedAutoCAD Civil 3D :: Missing Profile View Band Labels
Jan 20, 2010I cannot for the life of me get the start and end labels for any band to display within a profile view. Each band has the 'label start' and 'label end' labels ticked and the major/minor labels display at every other point but don't display anything at the start of the view or end. The profile views are taken from a simple straight alignment and the profiles themselves extend the full length of the view.
View 9 Replies View RelatedAutoCAD Civil 3D :: Plan Production - Pipe Network Profile Labels Are Missing In Sheets
May 6, 2012In plan production, I have created the sheets (plan & profile) as a seperate drawing.
when I open the sheets, the pipe network profile labels are missing in model & paper space. (attachment 01)
I tried to on/off the annotation visibility tabs in the lower right corner (attachement 03)
Note: While creating the sheets, I select the tabs for pipe network & copy pipe network labels to destination drawings (attachment 02).
AutoCAD Civil 3D :: Plotting A Drawing From Layout Produces Crowded Labels
Mar 1, 2013Plotting a drawing from layout produces crowded labels,
This is the second time I’m highlighting this issue. I couldn’t figure out how to print a drawing (attached) from the lay out. What I got is a very crowded drawing as shown in the screenshots below.
I wanted to print my drawings (contour, horizontal alignment, vertical alignment, etc.) in an A4 with a scale of 1/1000 or 1/1300. Then what should be:
The annotation scale?
The viewport scale?
The plot scale?
What did I get very crowded drawing when I tried to print from the layout?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD Civil 3D :: How To Rotate Point Labels On An Elevation (facade) Drawing
Dec 7, 2012Is it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
AutoCAD Civil 3D :: COGO Point Labels Not Rotating When Entire Drawing Is Rotated?
May 14, 2013So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
AutoCAD Civil 3D :: Make Sure Annotated Surface Labels Spot Elevations From 3D Design Drawing
Dec 19, 2013How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
AutoCAD Civil 3D :: Surface Slope Labels - Rise:Run Custom Labels?
Dec 27, 2013I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels
May 3, 2013I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
AutoCAD Civil 3D :: Edit In Storm And Sanitary Analysis-Drawing Underlay Is Missing?
Oct 12, 2011In Civil3d 2012 when the Edit in Storm and Sanitary Analysis command is used to send a Civil3d pipe network and Catchment areas to SSA the program appears to open as expected with the "Create New Project" dialogue box displayed.
When the Create New Project prompt is accepted nothing is displayed in the SSA plan view.
But.... If I go to the SSA File pulldown menu the .spf project file is available and when it is selected a dialogue box is displayed indicating that the Background file(the dwg) file cannot be found and do we want to search for it "Yes/No".If No is selected the pipe network is displayed as expected.
If Yes is selected and the dwg file located and selected then the pipe network is displayed as expected but the background file looks like proxy objects.
Civil3d2012
Win7 64bit
NVidia Quadro2000M
AutoCAD Map 3D :: Labels Missing In Rotated Viewports
Jun 13, 2012Using Map 2013.It seems that when a viewport is rotated more than 45 degrees in paperspace, the labels disappear.
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: 6075CTO
BIOS: Lenovo ThinkCentre BIOS Ver 2RKT38.0
[code]....
Lightroom :: Colour Labels Missing In 4?
Mar 10, 2012I've just installed LR4 and imported my catalog from LR3. All have imported OK apart from the fact that I had my pictures colour labeled and these don't show in LR4. The labels show in Bridge so they are still there but don't show in Lightroom.
View 4 Replies View RelatedAutoCAD .NET :: Programmatically Add Labels To Objects On A Drawing?
Mar 6, 2013My requirement is to programmatically add labels to the objects on a CAD 2013 drawing in one operation (as opposed to typing them in). The labels exist in an external excel spreadsheet. I am new to CAD development.
View 4 Replies View RelatedIllustrator :: CS6 Missing Thumbnails And Labels In Layers Palette
Jan 16, 2013Seen this bug before on Mac OSX 10.6.8..CS6 Illustrator 16.0.3 Missing thumbnails and labels in the layers palette.Also note missing selections at the bottom of the palette.
View 2 Replies View RelatedIllustrator :: AI CS6 Layers Panel Missing Labels When Deselect Print In Layer Options
Oct 9, 2012AI CS6 Layers panel missing labels when you deselect print in the layer options. Is this a bug? I noticed this on a furnished file at work on a MacPro and had a hard time working the file because all of the labels were missing.
I stumbled on the cause when I turned on the Print Layer and all the labels came back. To be sure it was not computer related, I made a file on my AI CS6 version 16.1.0 with the same result. See screen shot.
MacBook Pro, OSX 10.6.8, 2.8 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3.
AutoCAD Civil 3D :: Can't Get Scale Of Labels Right
Sep 12, 2012I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedAutoCAD Civil 3D :: Contour Labels 2
Sep 20, 2011When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
AutoCAD Civil 3D :: IF Statements In Labels
Jan 12, 2013I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
AutoCAD Civil 3D :: Fields Within Labels
Oct 4, 2012Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies View RelatedAutoCAD Civil 3D :: Labels Are Not Rebuilding
Jun 4, 2013I opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedAutoCAD Civil 3D :: Intersection Labels With POT POC
Oct 25, 2010I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedAutoCAD Civil 3D :: Clearing Tag Labels
Oct 17, 2012I worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCAD Civil 3D :: Labels Not Next To Markers?
Aug 15, 2013I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
AutoCAD Civil 3D :: Contour Labels Will Not Add
Dec 16, 2013I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
AutoCAD Civil 3D :: Disappearing Profile Labels?
Jul 25, 2012acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
AutoCAD Civil 3D :: Parcel Labels In Layouts
Apr 4, 2013On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: Code Set Style Labels
Apr 29, 2013My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
AutoCAD Civil 3D :: How To Edit Station Labels
Mar 28, 2012First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
AutoCAD Civil 3D :: Create Labels That Are Non-associative?
Jun 11, 2013Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
AutoCAD Civil 3D :: Reinserting Alignment Labels?
Apr 29, 2009I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View Related