AutoCAD Civil 3D :: Fields Within Labels
Oct 4, 2012Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies
ADVERTISEMENT
Lightroom :: Metadata Fields - Will Star Ratings And Labels From Bridge Show Up?
Jun 29, 2012I'm a hobbyist photographer with lots of personal photos and some I might use for work related projects. I'm just getting started with LR and want to make sure I start right.
1. What metadata fields should I consider using that may be useful in the future? None of my images currently have metadata applied.
2. Will star ratings and labels from Bridge show up in LR?
AutoCAD Civil 3D :: Surface Slope Labels - Rise:Run Custom Labels?
Dec 27, 2013I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels
May 3, 2013I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
AutoCAD Visual LISP / AutoLISP :: Can Fields Reference Other Fields On Layout
Jul 11, 2012I was wondering if it was possible to say have a cover sheet of a project with fields and then have the other sheets in the project have their fields populate using information from cover sheet?
View 3 Replies View RelatedAutoCAD Civil 3D :: Fields In Sheet Set Manager
Aug 29, 2012Basically, I want to get the sheet set to automatically label in my title block the TOTAL sheets of the sheetset. I have a field within each drawing for the current page number of the sheetset, that is an easy one, what is hard is how do I code the second field to display the LAST page of the sheetsets page number?
Example:
My text looks like this: Page 4 / 10. Say I have 10 sheets, all in the sheetset and numbered. What I have done in the past is set the first page number to Current Sheet Page Number, but in each sheet set the second part to the last page number, in this case sheet 10. The problem comes later if I add in a sheet or two, to push the total sheets to say 12, I would then have to go through each sheet individually to change that last page component to sheet 12 instead of 10.
Is there an easy way (and Im sure there is) to just set that last field to automatically reference the page number of the final sheet in the sheetset, no matter if it changes or not? How do you do it?
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
AutoCAD Civil 3D :: Update Date Stamp With Fields?
Nov 26, 2012Settings on the User Preferences Tab (Options Dialog Box) control whether fields are updated automatically or on demand (FIELDEVAL system variable). The Date field cannot be updated automatically regardless of the setting of FIELDEVAL.
View 9 Replies View RelatedAutoCAD Civil 3D :: Using Fields In Tables Linked To Excel?
Dec 6, 2012I just began messing around with linking excel and autocad (disappointed that you can't link to .xlsm but that will go on the wish list). I was wondering if there was already a post as to how to not lose your fields when you download from source. I have a table that has fields from my sheet set with drawing names etc...but everytime I click download from source it converts the field to plain text.
View 9 Replies View RelatedAutoCAD Civil 3D :: SSA 2014 - Spaces In ID And Description Fields?
Nov 13, 2013In previous releases, I was able to put spaces in the text of my ID, in the description field, etc. and I can't in 2014. What is the reasoning behind this change?
View 1 Replies View RelatedAutoCAD Civil 3D :: Update Fields (date) In All Layouts
May 24, 2013in order to avoid opening each layout and update the fields or the same text written in Title Block
- is there a way to update automatically the fields (date for example) in all the layouts with a single command.
- is there a way to update the same text in all the layouts (for example changing the adress or the name of the project written in the title block - like in word with search and replace function)
AutoCAD Civil 3D :: Add Sheet Set Fields To Label Styles?
Jul 23, 2013Can i add sheet set fields to label styles
View 2 Replies View RelatedCorelDRAW X6 :: Make Print Merge Fields Relative In Position To Other Fields?
Oct 1, 2013Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
AutoCAD Civil 3D :: Adding Blank Attribute Fields To Blocks?
Sep 26, 2013I am using ACAD Civil3d 2014. I have the map utility loaded
I created a drawing for a client and created blocks to represent handholes. They now need to go back to the blocks and add the HH number and fiber size. How can I add to blank att fields to the blocks so that I can send them the drawing and have them enter the information manually?
I searched around and only see solutions for adding attribute labels to the block.
AutoCAD Civil 3D :: Titleblock Attribute Definitions (Fields) Won't Move To New Location
May 26, 2013I have created a new layout from Templates that are the C3D standard templates. I get the below messages in my command bar and subsequently my template does not have any of the blocks, north arrow...nothing. Just a blank sheet. Why? See below messages that I copies from the command bar....
Command: <Layout from Template>
Duplicate definition of block _ClosedBlank ignored.
Duplicate definition of block AeccTickLine ignored.
Duplicate definition of block AeccTickCircle ignored.
Duplicate definition of block North ignored.
Duplicate definition of block Graphic Scale - Imperial ignored.
Duplicate definition of block ANSI D Title Block ignored.
AutoCAD Civil 3D :: Update Title Block Fields Manually Over Written?
Oct 23, 2013I have a job where some one has manually written valves into the titleblock fileds that should be coming from sheetset manager is there a way to reinsert the titleblock and have the fields come back.
View 1 Replies View RelatedAutoCAD Civil 3D :: Create User Defined Data Fields That Can Be Attached To A Polygon?
Mar 23, 2012Is it possible to create user defined data fields that can be attached to a polygon. then be able to export the polygon and data fields to ArcMap
View 1 Replies View RelatedAutoCAD Civil 3D :: Can't Get Scale Of Labels Right
Sep 12, 2012I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedAutoCAD Civil 3D :: Contour Labels 2
Sep 20, 2011When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
AutoCAD Civil 3D :: IF Statements In Labels
Jan 12, 2013I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
AutoCAD Civil 3D :: Labels Are Not Rebuilding
Jun 4, 2013I opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedAutoCAD Civil 3D :: Intersection Labels With POT POC
Oct 25, 2010I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedAutoCAD Civil 3D :: Clearing Tag Labels
Oct 17, 2012I worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCAD Civil 3D :: Labels Not Next To Markers?
Aug 15, 2013I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
AutoCAD Civil 3D :: Contour Labels Will Not Add
Dec 16, 2013I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
AutoCAD Civil 3D :: Disappearing Profile Labels?
Jul 25, 2012acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
AutoCAD Civil 3D :: Parcel Labels In Layouts
Apr 4, 2013On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: Code Set Style Labels
Apr 29, 2013My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
AutoCAD Civil 3D :: How To Edit Station Labels
Mar 28, 2012First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
AutoCAD Civil 3D :: Create Labels That Are Non-associative?
Jun 11, 2013Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
AutoCAD Civil 3D :: Reinserting Alignment Labels?
Apr 29, 2009I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View RelatedAutoCAD Civil 3D :: Existing Points Labels
Mar 5, 2013I have an existing topic dwg and it has points from the survey crew shots in the dwg, I need to label this points. I want to extract the TC and Gutter information from the points by picking the the points I want to label.
View 1 Replies View Related