AutoCAD Civil 3D :: Titleblock Attribute Definitions (Fields) Won't Move To New Location
May 26, 2013
I have created a new layout from Templates that are the C3D standard templates. I get the below messages in my command bar and subsequently my template does not have any of the blocks, north arrow...nothing. Just a blank sheet. Why? See below messages that I copies from the command bar....
Command: <Layout from Template>
Duplicate definition of block _ClosedBlank ignored.
Duplicate definition of block AeccTickLine ignored.
Duplicate definition of block AeccTickCircle ignored.
Duplicate definition of block North ignored.
Duplicate definition of block Graphic Scale - Imperial ignored.
Duplicate definition of block ANSI D Title Block ignored.
View 9 Replies
ADVERTISEMENT
Sep 26, 2013
I am using ACAD Civil3d 2014. I have the map utility loaded
I created a drawing for a client and created blocks to represent handholes. They now need to go back to the blocks and add the HH number and fiber size. How can I add to blank att fields to the blocks so that I can send them the drawing and have them enter the information manually?
I searched around and only see solutions for adding attribute labels to the block.
View 2 Replies
View Related
Jun 7, 2013
I am creating a series of Blocks representing cable terminations with labels at each end for terminal number, wire number and wire color for each twisted-cable pair, ie six labels for each pair. There will be blocks for cable configurations with different numbers of pairs. Having created the first block for a single pair, it should be easy to develop the multiple pair versions by copying the elements and renaming the labels, but I have to edit each attribute definition individually - is there a way of globally editing the definitions in the same way that you can edit attribute values when the block is used; eg if I have attribute Tags T1, W1, C1 and want to rename them to T2, W2, C2?
View 3 Replies
View Related
Mar 6, 2007
I've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
View 9 Replies
View Related
Aug 14, 2013
I am a user of AutoCAD 2014 plain vanilla. I created a title block for my company which has worked well for a year or so. Recently, I have been experiencing the following. After inputing info like an address, sheet name etc. into an attribute definition everything will be fine. When I go and work on other other pages in paperspace, and then return, I will find that the text has dropped vertically into an area it shouldn't. how to remedy this? Attached is a screenshot.
View 9 Replies
View Related
Apr 15, 2012
Is it possible to add Actions and Parameters to Attribute Definitions?
View 9 Replies
View Related
Sep 17, 2010
Is there a way to preset the reach of the sprout on Location Property Definitions in Property Sets?
For example, I have upper cabinets that aren't over a Space, because there isn't flooring underneath them. Because of this, the sprout reports "Space Not Found" in the cabinet schedule, and I have to go in and manually pull each sprout out until it latches onto a Space.
I would like to set all sprouts to automatically reach out 2'6" from their insertions point.
View 9 Replies
View Related
Mar 14, 2012
Any short cut to update the fields in the attribute without double clicking on the block attribute to change.
I'm looking for something to write in the command line.
View 9 Replies
View Related
Aug 7, 2013
I have been creating new 2D dynamic blocks for our engineering department to use. I was able to combine our old "dynamic" blocks, similar in design, into one new block. There are attributes within in the block to display information regarding which block is selected and shown. This information is then extracted using a LISP routine to be used via Excel for manufacturing.
I have run into problems with some of the fields updating. At times they will update and other times they won't. The attached file has an example of the blocks I'm using. They are the same block. However, the block on the left was placed into a new drawing using CTRL+V. The lone field in the bottom left corner of the block updates correctly when the block properties table is changed and REGEN is run.
The block on the right was inserted into this drawing using the INSERT command. The same field does not update using REGEN. FIELDEVAL is set to 31 based on what I've read in other posts.
Not sure what the difference would be, but I've been seeing it for the past week while creating the new blocks. It's a bit frustating not knowing why it will work sometimes and not others. I've pulled my hair out for long enough trying different things to see if it will work, but to no avail.
View 3 Replies
View Related
Dec 21, 2012
I made a dynamic block (REINF_ID) with attributes that i will use to determine the reinforcement of structural walls on elevations. I inserted an attribute called LIGN1 which will be visible and the other attributes such as DIA(bar diameter)-SPC(rebar spacing)-POSITION(rebar position) will be invisible.
Now, in the block editor i want to insert 3 fields in the LIGN1(visible) attribute default value that will link to other attributes in the same block. example: LIGN1 default = 25M(DIAattribute) @(text) 300(SPCattribute) EF(POSITIONattribute). When i insert my block in a dwg and i decide to modify the DIAMETER(invisible attribute) from 25M to 30M for example, I want the value in the LIGN1 attribute to update to show the new DIAMETER.
When I regen, it does not modify the attribute (LIGN1) 25M to 30M, it keeps the default value of the attribute (25M).
View 0 Replies
View Related
Oct 15, 2012
I just opened up a project Sheet Set that i haven't worked on in a while, and all of my layout pages have a series of "#" in place of the fields. For example, the name of my viewport should read "Head Detail", which is the name given to that view in the Sheet Set Manager, but instead reads "##############". This also happens with my view numbers, callout bubbles, etc.
However, the information in my title block is still intact. For example, the Project Name, Client Name, Page Number, etc. all read the correct values.
I tried opening the drawings in Reference Manager, but I see no alerts or errors. I have had this happen before in previous versions going back to at least 2010, but they have always been small projects and I just recreated the views and callouts. This is a large project however, and redoing this will cost hours, if not days of extra work.
In examining the fields, it seems like the problem fields are those defined by the SheetSetPlaceholder Filed Name, and the Placeholder type is irrelevent; they are all broken. For other Field Names, for example CurrentSheetNumber, the references still work.
View 1 Replies
View Related
Apr 17, 2013
I'm trying to edit our titleblocks. There is information we repeat at the top of the drawing like the drawing name, sheet number, total number of sheets, contract number, etc. It is ridiculous to have to type this information in twice. I tried creating both text and constant attributes at the top and insert field pointing to attributes at the bottom but all I get is ---- when inserted. My inserted field was ->Object->(selected attribute)->Value. I am using version 2011. I would think it should be easy to "repeat" values of attributes inside a block.
View 5 Replies
View Related
Jan 6, 2014
Convert Fields to text in my Title Block. I want to change some specific attributes only to convert into texts in my title block ( "MODE_A3" is my Title Block name).
For example in "MODE_A3" block having lots of tags like TAG1, TAG2, TAG3 upto TAG10 with fields. I need to change TAG3, TAG4, & TAG5 attribute fields into texts in all layouts.
View 6 Replies
View Related
May 18, 2006
If there a way to display the projection of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort?
View 3 Replies
View Related
Feb 11, 2012
Working in Autocad 2011, PC version.My drawing has blocks that contain (1) visibible and editable attribute. Also contain (4) invisible and constant attributes. I need to update text information in the (4) invisible attributes. Using BATTMAN seemed the easiest way to do this, but when "Sync" ing the changes, the rotation angle/placement of the Visible attribute changes globally in the drawing.
(Many of the Visible attributes location were adjusted to prevent overlapping with other drawing lines.
How can I update text values of invisible attributes without rotating/adjusting the placement of my visible one?I've tried -attedit & attredef - neither of them did what I needed.
View 1 Replies
View Related
Sep 10, 2012
How can I add an attribute to a block without the other attributes to move from their position. With the ATTSYNC belongs unfortunately not because the old attributes moved back to the original places that I will not.
View 9 Replies
View Related
Jul 11, 2012
I was wondering if it was possible to say have a cover sheet of a project with fields and then have the other sheets in the project have their fields populate using information from cover sheet?
View 3 Replies
View Related
Feb 8, 2012
I'm in the process of moving 100+ dwg files physically, but cannot figure out how to update the drawing locations w/o recreating a Pre-Existing fully populated (names, drawing numbers, etc.) SheetSet. Here's what I want to do:
Move dwg files from one location to another & update the new physical location (Expected/Found/Relative/Full/UNC Path) in a copy of an existing dst.
I've tried moving the files, then updating the Expected Path from within the SSM, but this works on a file to file basis, and takes a long time to perform on a 100+ drawing SheetSet. I've tried using SSMPropEditor, but for some reason, the changes do not stick. The only way that I've found to accomplish this is to use the Archive function (as a folder instead of a ZIP file) from within SSM, but there has to be an easier way to do this...
BTW: I'm using ACAD 2010 on a Core i5 XP machine.
View 2 Replies
View Related
Nov 16, 2008
I have a problem with using .Net to insert a dynamic block and set the size property. The attribute text does not move correctly on insert, but will if manually stretched after the fact. From my research the recommendation is to make sure the attribute definition is marked as "Locked".
I have an attribute definition inside a circle (classic door/window number), both the circle and attribute are included in the Action Selection Set, however only the circle moves correctly. It all works correctly if manually inserted/stretched.
View 9 Replies
View Related
Jun 19, 2013
This is my Dynamic Block with attributes.But when I will stretch or flip the block the attributes will stay on the original positions.
The attribute mode is on locked so I don't get it. Any way to link the both attributes, so I only have to fill in the value for once.
View 1 Replies
View Related
Apr 23, 2013
Can I pick a 3D sketch and move the whole thing closer to 0,0,0 ? It is currently sitting around 5km,10km,2km from zero.
This makes everything very chunky, and very difficult to visualize anything correctly.
This was generated from a site survey, which was work in progress, it has now all been finalised, but I don't want to loose a weeks work by starting again. (Using AutoCAD to move the points to Zero)
View 4 Replies
View Related
May 24, 2011
I have some blocks with a point connected to them, the point is free movable, moving the point does not move the block, but moving the block does also move the point. each block has 1 point connected to it.
what i want is to move the point of the blocks i select to the same location. (without moving the blocks themselves)
I am using autocad 2011 (tried to upload the block in question but doesn't seem to be working)
View 9 Replies
View Related
Dec 26, 2013
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
View 9 Replies
View Related
Apr 25, 2013
Is there anyway to move attributes up or down on the list of a title block? I like everything for Rev 1 to be together (Drawn By, Checked By, Approved By, Date, Description, and Rev Number)...However, i was in a hurry and skipped Approved By. Once i added it, after the entire title block was done, it moved it to the very bottom on the list. Is there a way to "Move Up" so that it's with the other Rev 1 group?
View 1 Replies
View Related
Nov 14, 2012
When I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.
View 8 Replies
View Related
Aug 2, 2013
I could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies
View Related
Oct 4, 2012
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies
View Related
Aug 29, 2012
Basically, I want to get the sheet set to automatically label in my title block the TOTAL sheets of the sheetset. I have a field within each drawing for the current page number of the sheetset, that is an easy one, what is hard is how do I code the second field to display the LAST page of the sheetsets page number?
Example:
My text looks like this: Page 4 / 10. Say I have 10 sheets, all in the sheetset and numbered. What I have done in the past is set the first page number to Current Sheet Page Number, but in each sheet set the second part to the last page number, in this case sheet 10. The problem comes later if I add in a sheet or two, to push the total sheets to say 12, I would then have to go through each sheet individually to change that last page component to sheet 12 instead of 10.
Is there an easy way (and Im sure there is) to just set that last field to automatically reference the page number of the final sheet in the sheetset, no matter if it changes or not? How do you do it?
Windows 7 x 64 bit
NVidia Quadro K3000M Dual Monitor
32.0 GB RAM
Intel Core i7-3820QM @ 2.70 GHz
Civil 3D 2013 SP 2
View 7 Replies
View Related
Apr 26, 2012
We have a title block wherein the Location attribute is normally a single line, but occasionally is two or more lines. Within the title block this attribute is surrounded by lines, left, right, top, bottom.
We would like the bottom line to move down when the user adds additional lines to the attribute.
View 1 Replies
View Related
Nov 26, 2012
Settings on the User Preferences Tab (Options Dialog Box) control whether fields are updated automatically or on demand (FIELDEVAL system variable). The Date field cannot be updated automatically regardless of the setting of FIELDEVAL.
View 9 Replies
View Related
Dec 6, 2012
I just began messing around with linking excel and autocad (disappointed that you can't link to .xlsm but that will go on the wish list). I was wondering if there was already a post as to how to not lose your fields when you download from source. I have a table that has fields from my sheet set with drawing names etc...but everytime I click download from source it converts the field to plain text.
View 9 Replies
View Related
