AutoCAD LT :: Editing Attribute Definitions
Jun 7, 2013
I am creating a series of Blocks representing cable terminations with labels at each end for terminal number, wire number and wire color for each twisted-cable pair, ie six labels for each pair. There will be blocks for cable configurations with different numbers of pairs. Having created the first block for a single pair, it should be easy to develop the multiple pair versions by copying the elements and renaming the labels, but I have to edit each attribute definition individually - is there a way of globally editing the definitions in the same way that you can edit attribute values when the block is used; eg if I have attribute Tags T1, W1, C1 and want to rename them to T2, W2, C2?
View 3 Replies
ADVERTISEMENT
Mar 6, 2007
I've created a dynamic block with two visibility states. The second state is a copy of the first state, but some of the attribute definitions have been moved, along with some of the geometry.
When I insert the block, then toggle between the two visibility states, the geometry changes as I would expect, but the attributes stay in the position dictated on the first state.
How can I make sure that the attributes move for the second state, as I need them to.
View 9 Replies
View Related
Aug 14, 2013
I am a user of AutoCAD 2014 plain vanilla. I created a title block for my company which has worked well for a year or so. Recently, I have been experiencing the following. After inputing info like an address, sheet name etc. into an attribute definition everything will be fine. When I go and work on other other pages in paperspace, and then return, I will find that the text has dropped vertically into an area it shouldn't. how to remedy this? Attached is a screenshot.
View 9 Replies
View Related
Apr 15, 2012
Is it possible to add Actions and Parameters to Attribute Definitions?
View 9 Replies
View Related
May 26, 2013
I have created a new layout from Templates that are the C3D standard templates. I get the below messages in my command bar and subsequently my template does not have any of the blocks, north arrow...nothing. Just a blank sheet. Why? See below messages that I copies from the command bar....
Command: <Layout from Template>
Duplicate definition of block _ClosedBlank ignored.
Duplicate definition of block AeccTickLine ignored.
Duplicate definition of block AeccTickCircle ignored.
Duplicate definition of block North ignored.
Duplicate definition of block Graphic Scale - Imperial ignored.
Duplicate definition of block ANSI D Title Block ignored.
View 9 Replies
View Related
Sep 24, 2012
making dynamics blocks and more over utilizing the attribute feature but I have discovered some chnages tat i need to make.
My question right now is, once an attribute is created and put into the block editor is that it? Ifi need to edit it can i edit it? I don't really see an option or command right off that would allow me to do this ?
View 1 Replies
View Related
Dec 10, 2012
is there an option that im missing to allow me to edit attributes in a block? i have set QAFLAGS to 0 and my pickfirst is set to 1.
View 5 Replies
View Related
May 16, 2012
trying to set up a system for a less advanced user.
basically they donot like the advanced attribute menu when you edit a block with attributes in them.
looking at the varriables the end user likes the Attdia set to 1 when you insert a block it then displays nice clean menu which just has the attributes you can edit.
can this be set so when you later edit a block this menu appear rather than the advance attribute editor?
View 2 Replies
View Related
Jul 30, 2012
Is there a way to edit the an attribute data if it is defined as number to add a value of .3 to the number being displayed in this attribute box. The feature is a point and i'm looing to add the .3 value to elevation attribute value that weren't pulled from a surface or created using object data.
View 1 Replies
View Related
Jul 30, 2013
what Collapse To Definitions does inside the iLogic Rules Editor. I've read online how it works in applications such as Visual Studio but I don't see any difference in iLogic between it and the other outlining tools such as Toggle All Outlining.
View 3 Replies
View Related
Apr 22, 2013
what's the different between
Dim oDb As Database = HostApplicationServices.WorkingDatabase
and
Dim oDb As Database = Application.DocumentManager.MdiActiveDocument.Database
View 3 Replies
View Related
Aug 14, 2012
On my Property Set Definitions I have a attribute table called "ROOM_NO". This is where I enter the full number/character of the room, in my case the value usually looks like "101A", and sometimes "A101B" for Room number.
I was asked to do another table to separate the fields.
ROOM_PREFIX ROOM_NUM. ROOM_SUFFIX.
Separating the room number in 3 attribute tables to "A 101 B"
I was thinking referencing the ROOM_NO table in each box and filtering out the numbers and character. For example in ROOM_PREFIX I would reference ROOM_NO and filter out the number and the suffix letter through a formula. And in ROOM_NUM I would Filter both alphabetical character.
how to write such formula?
View 4 Replies
View Related
Aug 23, 2013
I have been having trouble storing attributes on border definitions. I have multiple borders which need to be used for different types of drawings. I have developed a tool which will use the desired border pragmatically and it works as planned. Currently the logic selects a border based on name, but since this can be edited by the user I need a more dependable way of retrieving a border. I had thought attributes would be the answer, but I'm running into problems. The attributes just won't stick. I've tried to add them manually through the API and with the Attributes Helper tool released.
See below for the code I'm using to add the attributes
Dim oAttr As Inventor.Attribute Dim oAttrSet As AttributeSet Set oAttrSet = oBorderDef.AttributeSets.Add("TestAttributeSet", True) oAttrSet.Copy = True Set oAttr = oAttrSet.Add("TestAttribute", kIntegerType, 12345) Debug.Print oAttrSet.Parent.Parent.Name & " " & oAttrSet.Name & " " & oAttr.Name & " " & oAttr.Value
It will print information leading me to believe that the attribute was added, but if I try to retrieve it either through the attributemanager or manually cycling through the border definitions no attributes exist.
View 4 Replies
View Related
Aug 5, 2011
Basically I have a rectangle and want to change the dimensions of it. There are a couple of attributed definitions that I want to stretch the and change it length but I alsowant the attributed definitions to move with the right hand side of the rectangle and the stay a constant distance from the right hand side. Unfortunately when I use the stretch action it filters out the attributed from the object that I can stretch, any way to include these AD’s with the stretch action
View 3 Replies
View Related
Jun 3, 2011
I've got hundreds of files to convert.
In VBA, how can I batch convert field attributes in blocks to text attributes while retaining the blocks? Is there a simple way to univerally convert them all at onceusing VBA? The plotted values for the fields must be retained, too.
Explode will not retain the value of the field.
Burst will not work as it explodes the blocks as well.
You can right-click on the field and slelct "Convert to text" from the RCM. So I know that the process exists within CAD, just need to batch the process for a quantity of DWGs at a time - in VBA.
View 1 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Dec 8, 2011
Background: Someone exploded an attribute block and copied it hundreds of times throughout a project, each time changing the Attribute Tag to match the Value they expected to appear in their drawing. The drawing must be xrefed, so the attribute definitions do not appear.
(There is only 1 attribute in the block.)
Proposed Solutions:
1:AutoLISP routine which copies Tag data from Attribute Definition into Value of Attribute Block:
Prompt-Select Attribute Definition
Copy Tag data
Prompt-Select Attribute Block
Paste data into Value
(Allow repeat to speed workflow)(*PREFERRED*)
2:AutoLISP routine which copies Tag data from Attribute Definition into Default Value and creates a new Block:
Prompt-Select Attribute Definition
Copy Tag data
Paste data into Default Value
Create New Block
(Select Multiple Objects)(Creates tons of new blocks which are messy)
View 3 Replies
View Related
Mar 16, 2012
I am using M Text Attributes to store imperial lengths in the drawing, feet inches and fractions (stacked). When I read back the Text String property which, is the M text Attribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction. So, is there any setting that could be used to tell the parser to add the space between the inch and the fraction?
View 1 Replies
View Related
Dec 21, 2012
creating a block with attributes. I did manage to get my block set up and inserted in a dwg, but I am unable to change the "value" of any attribute. Unless I click on the "..." button next to the value field.
View 1 Replies
View Related
Jul 9, 2012
I have a drawing with all my block definitions and the blocks inserted and annotated. Seems that in a previous version of Autocad, I could insert the drawing and cancel the insertion at some point of the insertion command sequence, such that the drawing was not inserted, but all the block definitions remained. I could then use the insert command and all of these blocks were available. Yes, sometimes this made my drawing memory size rather large and I would have to purge the unused blocks later to reduce the memory size of my drawing.
View 1 Replies
View Related
Aug 2, 2010
Any way to automate the import of Style Definition files into the style and standard manager in the drawing environment? If not is there some other way to do it?
View 7 Replies
View Related
Jan 12, 2009
I have created a new property set definition and added two manual property definitions and applied this to all objects. Every object on the drawings has distinct values for these two properties. These property values show correctly on the Extended Data tab of the Properties palette.
I have published to DWFX with AEC property set data set to 'Include'. In the resulting DWFX in Autodesk Design Review I can select each object and see the standard properties but not my special property set data.
View 1 Replies
View Related
Oct 18, 2013
Is there a way to change the material definitions to CTB format in the plot style under the material style? See attached image.
I have a client that wants everything in CTB format and in AutoCAD Architecture. I can get the drawings into CTB but the materials plot way too heavy and when I go in the styles they show Full Saturation or Wide, Thin from the STB plot styles.
The Drawing is in CTB and I am pulling my hair out trying to get the couple materials used set to Color based plotting.
View 1 Replies
View Related
Oct 5, 2012
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies
View Related
Mar 20, 2012
I'm trying to insert our company logo (a DXF file) into the a title block definition however the insertion point seems to default to 0,0.How can I insert it with a user defined insertion point?
You will see from the attached screen snipe what I mean about being forced to insert it at the 0,0, coordinates. I'd like to insert it into clear space then scale it and move it into replace the existing logo.
View 4 Replies
View Related
Nov 12, 2013
Any way to create a dynamic link between the property set attached to a space and excel?
I have a lots of spaces that has a property set attached, some of this property changes often. So if it was possible to create a excel sheet that presents each property for each space and then I could change the property in excel and put it back to Architecture it would save me a lot of time.
View 1 Replies
View Related
Sep 18, 2013
I am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies
View Related
Dec 13, 2013
I am using some custom property set definitions to add information to spaces. However as I insert spaces I find that I have to go to the extra step to add the property set to the object using the Extended Data tab in the Properties Palette.
It is not a huge deal but sometimes it is forgotten and schedules are not reporting properly, or the display theme is not correct. Although there are tools to quickly add them I would like to know if there is an automatic way to add them while creating the spaces/zones.
On a related note. There is a property set definition that is in each file by default called RoomFinishObjects. Is there a way to purge this? I don't want to attach finishes to my objects. But it seems to be embedded in the file.
View 4 Replies
View Related
Sep 17, 2010
Is there a way to preset the reach of the sprout on Location Property Definitions in Property Sets?
For example, I have upper cabinets that aren't over a Space, because there isn't flooring underneath them. Because of this, the sprout reports "Space Not Found" in the cabinet schedule, and I have to go in and manually pull each sprout out until it latches onto a Space.
I would like to set all sprouts to automatically reach out 2'6" from their insertions point.
View 9 Replies
View Related
May 3, 2012
I FINALLY decided to get my head around the Sheet Set Manager (kudos to Kate Morrical's video series).
I understand the need to create custom properties, and I can see that you can either "add" or "delete" custom properties, but is there any way to CHANGE the property after it's been defined?
For example, if I create a custom property complete with a default value, but discover later that I made a spelling mistake (eg. "Darwn By" instead of "Drawn By"), is there any way to MODIFY it?
View 1 Replies
View Related
Nov 25, 2011
The CADdesigners have asked me if i can make a function that runs through our AutoCAD 2012 MEP model attaching certain predefined classification definitions to ducts, pipes, MVparts etc.
I have used hours searcing for examples / tutorials on how to connect to the MEP objects not finding what i need.
View 5 Replies
View Related
