When I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.
Sometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedIllustrator CS6, menu object, transform, move: when I move an object using orizzontal value and vertical value (example 10 mm from X and 10 mm from Y) the value in distance and angle is correct (14,1421 of distance and -45° angle) but, when I want to use distance and the angle for drawing in isometric way (example: 10 mm distance and 30° angle) the orizzontal and vertical value is not correct as you can see in the attached file below
View 14 Replies View RelatedI am using Illustrator CS6. When I select an object and open the Move window (either by pressing the Enter key or selecting Object>Transform>Move), I try and move the object at a given angle and a given distance. I leave the Horizontal & Vertical dialogs blank and just fill in the information for the Distance and Angle. When I press OK (or Copy), nothing happens. In all previous versions of Illustrator, this feature worked perfectly. I can not get it to work in CS6.
View 1 Replies View RelatedIn Transform controls I have write exact distance X: 1240.00 pixels (1. Picture)When I click ok, the object remains in its previous location by the guide .1240 .50 pixels (2. Picture). URL....
View 6 Replies View RelatedWhat governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
I am having trouble with the geo marker and the geographic settings. the file given to us has a pre defined grographic location, (which is incorrect) which is making the file zoom out a lot further than desired. I change the geographic location and the position of the geo-marker, but when I use zoom extends, it still zooms all the way out to the undesired distance. There is no "space junk" out that far, so I do not know what else it can be.
View 4 Replies View RelatedIs there a way to preset the reach of the sprout on Location Property Definitions in Property Sets?
For example, I have upper cabinets that aren't over a Space, because there isn't flooring underneath them. Because of this, the sprout reports "Space Not Found" in the cabinet schedule, and I have to go in and manually pull each sprout out until it latches onto a Space.
I would like to set all sprouts to automatically reach out 2'6" from their insertions point.
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
C3D 2012
Dell T7400, 4GB RAM, Win 7 64 bit
Nvidia Quadro 4600
RE: Autocad LT not able to move an entity along a line a specific distance using cursor snap and dynamic input
What I want to do is move a line on an angle a certain distance in the direction of the line itself in this case 20mm
What used to happen is you'd simply select move and an endpoint on the line then hover over the mid or opposite endpoint of the line and enter 20 and it would move 20mm along the trajectory of the line.
The same set of actions now only seem to allow you to move the entity 100mm (the default value) along itself in the correct direction. If you enter 20 it does not move and if you enter 50 it moves 100!
How to move circle -centerpoint- to the middle of distance between two rectangles?
I am using autocad 2013.
Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
Here's a couple examples of the kind of effect I'm looking for.
Some what new to Civil 3D, so I hope I explain this correctly..
I imported points with linework and then needed to move them slightly. I unlocked the points and moved them with no problems, but I then went to re-process linework which moves the points back to their original location. I have tried relocking the points first before re-processing linework, but then it appears that nothing has happened.
On a couple assy's, I am trying to use pack&go to make self-contained versions of them.
Only problem is, the assy file (xxx.iam) and all sub-assy files are still linked to the component files in the original location even though the component files were copied to the new location with the P&G command
The whole point in this feature is to make self sufficient copies of something that don't depend on the original data.
This shows the settings I am using It is finding all the files ok. It just doesn't change the relationships on the new iam files. I could manually copy them and do the same thing this feature is doing.
Is there some hidden checkbox I need to find ? Note, I also tried once with "Include linked files" unchecked and got the same result.
I have this Dynamic Block which has a few distance parameters on it and an attribute at beginning of each parameter which are attached to a stretch action. If manually bring the block in. And set a value to attribute and then stretch the it , attribute move along with action. But when I do it pragmatically it doesn't . Basically attribute stays at original location of original block before stretch. What is wrong with my code. Or Shall I do something to Attributes when I change the distance parameters in Program? I don't know .
I have a function which bring the block in and set attribute first and then another call which change the distance . So I don't show the first function which to me works fine . The problem is this part.
For Each myBRP As DynamicBlockReferenceProperty In myBRC
For I = 1 To NumbderOfDistanceParamsinDynBlk
If myBRP.PropertyName = "Distance" & Trim(i.ToString) Then
myBRP.Value = DynDistancevalue(i)
End If
Next
Next
Windows 7, LIghtroom 4.4 - when exporting files all works fine when I set the output location to be the same folder as original. If I select 'Specific Folder' then press 'Choose' LR then Lightroom stops working. I've upgraded to LR 5.3 but the same thing happens.
View 1 Replies View RelatedI have a big problem with the viewport in 3ds max 2011/2012. On each viewport I have a black or white bars on right. these bar make the mouse become inaccurate for example when i want to select a vertex I can't drag the mouse on it and click. I have to move the mouse away from it a distance to select it (see my attachment image). I tried to update the graphic driver and the 3ds max 2012 SP1 but the problem's still there.
View 9 Replies View RelatedI'm in the process of moving 100+ dwg files physically, but cannot figure out how to update the drawing locations w/o recreating a Pre-Existing fully populated (names, drawing numbers, etc.) SheetSet. Here's what I want to do:
Move dwg files from one location to another & update the new physical location (Expected/Found/Relative/Full/UNC Path) in a copy of an existing dst.
I've tried moving the files, then updating the Expected Path from within the SSM, but this works on a file to file basis, and takes a long time to perform on a 100+ drawing SheetSet. I've tried using SSMPropEditor, but for some reason, the changes do not stick. The only way that I've found to accomplish this is to use the Archive function (as a folder instead of a ZIP file) from within SSM, but there has to be an easier way to do this...
BTW: I'm using ACAD 2010 on a Core i5 XP machine.
Whenever I send a pic from Lightroom to an external editor, an "intermediate" tiff is saved in the original location and put in the catalogue. This is not only useless, because all Lightroom edits are stored in the sidecar but also a nuisance, as it causes a congestion on my HD.
I want to keep my "originals" directory clean and store all "edited" files in their own folder structue. I wouldn't have bothered asking, had I not come across a Photoshop plug-in MetaRaw [URL] that converts Raw-files that older versions of PS don't support to tiff and opens them in CameraRaw or PS directly. In the settings dialogue of that plug-in you can decide whether the tiff gets deleted upon opening in PS, upon closing the program or remains in the cache.
Can I pick a 3D sketch and move the whole thing closer to 0,0,0 ? It is currently sitting around 5km,10km,2km from zero.
This makes everything very chunky, and very difficult to visualize anything correctly.
This was generated from a site survey, which was work in progress, it has now all been finalised, but I don't want to loose a weeks work by starting again. (Using AutoCAD to move the points to Zero)
I have some blocks with a point connected to them, the point is free movable, moving the point does not move the block, but moving the block does also move the point. each block has 1 point connected to it.
what i want is to move the point of the blocks i select to the same location. (without moving the blocks themselves)
I am using autocad 2011 (tried to upload the block in question but doesn't seem to be working)
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
Having trouble with object snap tracking. At times i am given distances from other objects to work with- which is what i am after.
However in some instances only the model space coordinates are displayed- not distances. Is there any way to ensure that only distances appear?
After I edit photos in an external editor, my photo is moved from its original location in the folder, to a different one. The photo stays within the same folder but is moved to a new location within it. This is really annoying as I have a couple thousand photos from a trip to Europe I have been going through, and after my external editor closes and I am returned to LR, I have to find the photo which has been moved to some random spot so I can put it back to where it originally was. I want to keep my photos organized by location, so it really sucks when my photos from Turkey end up with my photos from Hungary. How I can stop this???
View 5 Replies View Relatedby mistake I imported (moved) several AVI and MPEG videos into a specific folder that I inteded to use as backup for one of my relatives.
Problem is that my original folders, where I stored these videos, along with specific names regarding genre and/or subject were left intact, with nothing inside them.
I am trying to find a way to "revert" the import process and send those files back to where they belong.
I could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View RelatedWhen I edit a photo in Photoshop from Lightroom 4 and save it back to Lightroom, the photo ends up somewhere else in the folder than it's original location. This is a hassle as my folders can have hundreds of photos. Is there a setting that will place the file back to where it came from?
View 4 Replies View RelatedI have created a new layout from Templates that are the C3D standard templates. I get the below messages in my command bar and subsequently my template does not have any of the blocks, north arrow...nothing. Just a blank sheet. Why? See below messages that I copies from the command bar....
Command: <Layout from Template>
Duplicate definition of block _ClosedBlank ignored.
Duplicate definition of block AeccTickLine ignored.
Duplicate definition of block AeccTickCircle ignored.
Duplicate definition of block North ignored.
Duplicate definition of block Graphic Scale - Imperial ignored.
Duplicate definition of block ANSI D Title Block ignored.
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI cannot remember what this is called, or where to find it in the menus. It doesn't have the word "duplicate" in it, but it should! You select an object and then go to a dialog box and set up how many times you want to duplicate it vertically or horizontally, and how far apart.
I will certainly write this command down when the answer comes through, but I can tell you it needs a name that sounds like what it is!
I opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?