AutoCAD Civil 3D :: Note Label Show In Original And Dragged Location
May 9, 2012
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
C3D 2012
Dell T7400, 4GB RAM, Win 7 64 bit
Nvidia Quadro 4600
View 4 Replies
ADVERTISEMENT
Jun 24, 2013
I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies
View Related
Jan 30, 2013
I'm trying to set up my point label styles and I don't understand how the dragged state settings work. The default setting is "as displayed" but then the leader does not flip, if I change the settings to "stacked text" the leader flips but the text is out of order. See the attached plot of some points to see what I mean, default on the right and stacked text on the left.
How can I set the point label so the leader will flip and keep the label components in the default order?
View 7 Replies
View Related
Sep 24, 2009
The labels normal anchor point is the bottom outside diameter of the pipe, but when dragged the anchor snaps back to the cl of the pipe.
The only workaround I was able to come up with is a "static" leader made up of two lines and an arrowhead block, which you can only slide up or down the pipe with the desired appearance but can't stretch.
The attached image shows the Civil 3D pipe label above and the desirable text/leader legacy version below.
View 1 Replies
View Related
Jul 22, 2013
I was wondering if it is possible to use an expression in a general note label? The type of label I am using is a general note label that displays our finish grade profile elevation in plan view. What I am trying to do is add a value to that label for the TC elevation and G at the ROW. I noticed in the settings tab of the tool space, surfaces has an expression button that has what I want but I am not seeing that under General/Label Styels/Note. Is it possible to right my own expression? We are using Civil 3D 2008 with Windows XP.
View 3 Replies
View Related
Mar 27, 2012
I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies
View Related
Dec 7, 2006
I was just wondering if you can customize your interface so you can edit note labels (or any labels for that matter) by double clicking. I've already gone throught the cui files but I can't find anything. Am I missing something. c3d 2007
View 9 Replies
View Related
Apr 11, 2013
Looking for a way to label two station on one alignment in a construction note.
Civil 3D 2013 (SP1)
Dell T3500
Win 7 Pro X64
Intel Xeon 3.2 GHz
24 GB ram
NVIDIA Quadro 4000
View 2 Replies
View Related
Dec 27, 2012
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies
View Related
Apr 11, 2013
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
View 9 Replies
View Related
Mar 6, 2012
I have created a label in Settings>Intersection>Label Styles>Intersection Location Labels. The label will annotate the intersection stations and alignment name - however I haven't been able to configure the northing, easting and point number of the intersection.
View 2 Replies
View Related
Oct 11, 2012
I need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
View 6 Replies
View Related
Jan 27, 2013
Profile View Band Styles, Vertical Geometry and Horizontal Geometry types, include the option to Anchor Labels to True Geometry Locations.
Any image/example showing the difference between the Anchor Label options (Segment in Band and True Geometry Location) in Vertical and Horizontal Profile View Bands.
View 5 Replies
View Related
May 8, 2013
I know that I can add coordinates for such elevation using text component editor but I have to add the letter "N" for North or "E" for East to identify the location of the elevation (North/East/South/West). But, is there a way to make a label style that reads up the location of an elevation automatically?
I've attached pictures below for this issue.
C3D 2012, C3D 2013
Windows 7 Professional 64-bit
Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
View 2 Replies
View Related
Sep 10, 2012
Some what new to Civil 3D, so I hope I explain this correctly..
I imported points with linework and then needed to move them slightly. I unlocked the points and moved them with no problems, but I then went to re-process linework which moves the points back to their original location. I have tried relocking the points first before re-processing linework, but then it appears that nothing has happened.
View 5 Replies
View Related
Nov 6, 2013
when i type a fraction in a label the fraction is alwas stacked i have to unstack the fraction but when i unstake the fraction the fraction show up like this 1 1#2. any thoughts about how to fix this? this only happens on one computer when a different user use that same drawing the fraction always show up unstaked 1 1/2.
View 2 Replies
View Related
Nov 7, 2012
In the drawings for my company, we will list notes along once side of the page using multiline text as a numbered list. Each number corresponds to a label I then use to mark up my drawings. My label is usually some sort of symbol with a number inside of it. Pretty standard. My problem is, when I want to add a note somewhere in the middle of this list, the numbering changes for everything after the insertion point and I have to go through the drawing and update each label individually. On complicated drawings I want to make sure I don't miss updating a label or see if there is a faster way to update everything. Is there a way to have a label of some sorts with a number that automatically updates to match a certain note so if I add a note in between or delete a note I don't have to change every single note?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a label which gives me a distance from the begining of my reference, but coordinates are not good for this because my reference is not linear. It is a alignement with tangents and curves. What I'm trying to figure out is how to create a label with the distance of the projection of the begining point of my feature line in the alignment to the begining of the alignment.
For example: There is a alignment (road) and a feature line (curb). The alignment is the axis of the road and the feature line is an edge of the road (not need to be exactly an offset). How to configure a label to show the two kilometer markers (0.0001 precision) of the road that are the beginning and ending markers of the part of the road that has curb?
View 1 Replies
View Related
May 14, 2013
I've been a casual user of Illustrator for many years, but have only used it at its most basic level. Now I need to begin using it more extensively to develop logos and what-have-you, and it seems that Murphy's Law has gone into effect... now that I need to use it, something has gone amiss.
I've been through Deke McClellands beginner training for AI CS4 and CS6, and I seem to recall this problem being addressed somewhere in that training -- but I can't find it.
So here's the problem:
After I draw a shape, any shape, and then click to reposition it on the artboard, when I release the mouse it snaps to a nearby location.
The shape doesn't stay where I want it to stay.
Smart Guides, Snap to Grid and Snap to Point are turned off.
Preferences > General > Keyboard Increment is set to 0.2 px.
View 3 Replies
View Related
Oct 10, 2008
Alignment, Geometry Point, Label Style that shows the "deflection angle" as either right or left at the PI point of an alignment.
View 9 Replies
View Related
Aug 2, 2013
When I reposition structure labels (in their 'dragged state'), the component <[Structure Offset Side(CU)]> does not show up while in drag mode. Sort of makes it hard to see the limits of the label if you are trying to place it in a congested area. Watch the "LT" part of the label in the GIF below.
No, it's not that big of a deal, but alignment labels with the same component do not behave this way, so I have to wonder why the structure labels do.....
View 4 Replies
View Related
Jun 14, 2012
I am trying to get the correct total mass of a particular assy variant in a view label. I am trying to avoid using I-Assemblies due to the length of time it takes to set up and inevitable fudging of parts lists with phantom parts when things go awry. Anyway, to get around that clumbsiness, I use a combination of suppresed parts, assembly Level of detail (LOD) and View representations to switch parts on and off for various assembly variants of a theme (which works fine for me). see my "Mass of LOD's.jpg" attachment which should fully explain the parts list filtering and what I WISH to achieve. My objective is to get the correct MASS per Level of Assy and View Rep (both called the same) to be automated, correctly (as per LOD/VIEW REP), ideally, in the view label or in a leader note. I reckon I was able to do this way back in MDT? Any enhancement in Inventor 2013?
Inventor 2012
Vista Ultimate 64bit
View 2 Replies
View Related
Apr 20, 2013
I am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
View 9 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Dec 30, 2013
Is there an easy way to add the superscript "2" to a note for Milli meters squared in Inventor 2010?
Example: mm2 or FT^2
View 4 Replies
View Related
Oct 27, 2011
In my part, there was already an existing Engineering note.
I wanted to add another note. I added my new note, but it does not show up in the browser. I can right click on the note note > Display note and both notes are shown in the engineering notebook. When I exit out of the notebook and go back to Inventor, still not there. Here is a short video of what I am seeing.
[URL]. The "Rev B" noteis the original one and Note 2 is the one that I just added.
Now I if I add another note, then all of them will show up in the browser. This is not the first time that I have seen this, but just thought I would bring this up.
This part was just made with a copy design from Vault. What is weird, is that if I go to the part that this was copied from and add the note, it shows up correctly then. Its like something is getting hosed in the copy design process.
View 2 Replies
View Related
Nov 14, 2012
When I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.
View 8 Replies
View Related
Nov 12, 2013
Is it possible to keep the dragged labels in the same configuration when import the same points with the same numbers second time (with different descriptions) choosing overwrite option? I want to avoid to move the points second time to make the drawing readable.
View 9 Replies
View Related
Jun 6, 2013
When dragging the point labels the arrow pulls away from the point. Is there a way to get the machine to have the arrow to touch the point it labels.
View 4 Replies
View Related
Sep 9, 2009
I have an alignment label that uses "dot blank" in the dragged state. In the drawings that the alignment is xreffed into, the leader converts to "closed filled".Why? How do i fix it?
C3D 2008
View 8 Replies
View Related
Nov 26, 2013
I am trying to line up labels in a dragged state. When I select the label and move it I can line it up nicely (as shown by the 6" V&B looking in line with the hydrant. When I select the point, the label shifts left (as shown by the 6" V&B far left). Is there a neat way to line up multiple labels? Civil 3d 2012
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 1 Replies
View Related
