I have created a label in Settings>Intersection>Label Styles>Intersection Location Labels. The label will annotate the intersection stations and alignment name - however I haven't been able to configure the northing, easting and point number of the intersection.
View 2 RepliesHow to label the intersection of the alignments for 3D 2012. This command will label the station equation between alignments automatically.
View 1 Replies View RelatedWhat can I do to show intersection information in a profile label?I mean, supose I have two roads (A and B)... what should I do to show in the road A vertical profile the name and the station of road B in the properly position of this A profile? URL....
View 4 Replies View RelatedI need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
View 6 Replies View RelatedProfile View Band Styles, Vertical Geometry and Horizontal Geometry types, include the option to Anchor Labels to True Geometry Locations.
Any image/example showing the difference between the Anchor Label options (Segment in Band and True Geometry Location) in Vertical and Horizontal Profile View Bands.
I know that I can add coordinates for such elevation using text component editor but I have to add the letter "N" for North or "E" for East to identify the location of the elevation (North/East/South/West). But, is there a way to make a label style that reads up the location of an elevation automatically?
I've attached pictures below for this issue.
C3D 2012, C3D 2013
Windows 7 Professional 64-bit
Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
C3D 2012
Dell T7400, 4GB RAM, Win 7 64 bit
Nvidia Quadro 4600
I am trying to create an intersection design using the Intersection Tools in C3D 2012. I followed the steps in the tutorials, created a corridor on the major road, splitted the regions, created the intersection and added it to the major road corridor, and connect the regions with the intersection portion.
I used the same assembly throughout the design just for simplicity, however, i notice that there are gaps of curb between the curb return section and the through section (as outline in red rectangles).
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedThe label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
What distinction is between “intersection” and “apparent intersection” in snaps,. I’m not sure what difference is between the “intersection” and “apparent intersection” in snaps.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View RelatedI've started doing my first intersections but I'm stuck with one mistake. I did all daylights and curb returns for intersection.
I have a feeling that it's incorrect targeting here, isn't?
What is the best way to relocate and intersection (created with the wizard) from 43+00 to 40+50? I dragged the alignment but the return baselines don't seem to come along for the ride. Would it be better to bite the bullet and redo it?
View 3 Replies View RelatedI am "trying" to design a intersection that contains four lane divided road. Northbound and Southbound lanes are 2% normal crown with a curbed median. I have alignments for each crown. The intersecting road is not crowned. This road is a retrofit so I am limited quite a bit so the intersection wizard is out. We're going old school with this one.
View 2 Replies View RelatedI need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedI m trying to create an intersection between two roads. See the attached jpeg. When i open the corridor properties i receive an error message which i don't understand. It seems like civil 3d has problem with the order of the regions. Also the corridor sections intersects in the area that i have place a remark "problem". I m trying to correct it manual but when i rebuilt intersection then it overlaps my manual correction
View 3 Replies View Relatedissue with my Corridor. It involves the intersection of a main road alignment and a secondary road. Thing is my main road has a 6' shoulder whereas my secondary road doesn't have a shoulder at all. I used the Intersection Wizard to create the Intersection, but the two templates don't align. Without the shoulder the ditches don't line up. I tried drawing a polyline between the two ditches and targeting it and that worked, but then realized that going from 6' shoulder to no shoulder wasn't working either so when I tried to target a polyline from the 6' shoulder to the edge of pavement all kind of stuff happened that didn't make sense to me.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
I have a site access road that extends from highway into site and then loops around and intersects with itself. Would like to keep this as one alignment in order to make Super Elev and master alignment easy to control across project team.
Issue is, we would like to use Intersection wizard at the intersection but cannot, as we ony have one alignment. We could model the intersection the old way, using kerb returns with design profiles, but as the design is still in early stages the intersection is likely to be frequently revised.
how we could utilise intersection wizard in this scenario?
I have a link starting from P1.Is there a way to check if the link is intersecting EG or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
C3D 2010 user
I have a problem modeling intersection. This is first time I am modeling intersection. I have gone thru' and actually did all intersection tutorials offered by C3D and naturally I felt like I am ready for it.
But in real world I am not. I am trying to model intersection and I keep getting error as "Value on Wrong side of alignment to profile". I looked at target mapping and thinks so that all is okay (may be not). I am attaching snapshot of error message as well as plan view. I wanted to forward actual dwg but size is too large to post.
Point to note:This is Left lane driving setting. I realized this after I created alignment/profile/assemblies but before I tried intersection modeling.
I did 8 iterations before this post.
I would like to know how it would be possible to manipulate the Intersection Wizard so that I can obtain the required shape as drawn by the architect. In essence create a "round about" shape. see the attached image for furhter detail.
View 4 Replies View RelatedMy corridor surface randomly bounces from top links to bottom links through the intersections even though I specified top links only and my corridor is modelling correctly.
Previously I just deleted the surface and recreated it with no errors but it doesn't seem to work now. This happens with both manually created intersections and ones created with the intersection tool.
Creating an intersection of two roads. I have created corridor using alignments, profiles and assemblies. then i have created the intersection. However, i find it quite strange. Maybe it's because of the assemblies. . I am attaching the file herewith .
View 1 Replies View RelatedI have a super-e road assembly as shown that is running into the intersection of a future road stub. I can not figure out how to get the sidewalk to grade out in the intersection transition I have created for the curb return. Any way to get through this situation?
View 2 Replies View RelatedI have a mainline corridor which is intersecting with a side road corridor that is curving towards the mainline. After the PT of the curve, the two alignments are parallel and I am using an offset assembly here for the sections. What is the best way to handle the area where the two corridors are coming together. As far as I've been able to tell, I cannot use an offset assembly through the curve. There will be a ditch between the two that needs to be shown someway or another. I've attached a screen shot.
View 5 Replies View RelatedI think it is not possible but .... Is there any way to reuse the wizard I have customized to create the intersection ?
Civil 3D (2013)
Having issue with the intersection tool for a road widening with turn lane with new roadway intersection. Not repaving entire existing roadway, sawcutting 2' into lane then paving new turn lane. Do most people use intersection tool for road widening, or is it strictly used for new roadways.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600