AutoCAD Civil 3D :: How To Configure Label To Show Two Kilometer Markers
Nov 5, 2013
I'm trying to create a label which gives me a distance from the begining of my reference, but coordinates are not good for this because my reference is not linear. It is a alignement with tangents and curves. What I'm trying to figure out is how to create a label with the distance of the projection of the begining point of my feature line in the alignment to the begining of the alignment.
For example: There is a alignment (road) and a feature line (curb). The alignment is the axis of the road and the feature line is an edge of the road (not need to be exactly an offset). How to configure a label to show the two kilometer markers (0.0001 precision) of the road that are the beginning and ending markers of the part of the road that has curb?
when i type a fraction in a label the fraction is alwas stacked i have to unstack the fraction but when i unstake the fraction the fraction show up like this 1 1#2. any thoughts about how to fix this? this only happens on one computer when a different user use that same drawing the fraction always show up unstaked 1 1/2.
When I reposition structure labels (in their 'dragged state'), the component <[Structure Offset Side(CU)]> does not show up while in drag mode. Sort of makes it hard to see the limits of the label if you are trying to place it in a congested area. Watch the "LT" part of the label in the GIF below.
No, it's not that big of a deal, but alignment labels with the same component do not behave this way, so I have to wonder why the structure labels do.....
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
I am trying to set-up point and point label styles to show trees on a survey plan. The point styles is set with a block, and a label is a regular label style that shows a point number and elevation. The problem comes when the label is positioned outside of the block that represents the point. What I need is sort of fixed offset from the center of the point.
I am putting together ROW markers using a process found on the Being Civil blog. The Marker setup shows on the Assemblies fine, I go through the corridor section editor and I can see the marker at the proper location for the ROW. The ROW marker will not show up on the section views, Not sure if I missed a step but everything seems to work up to the point of putting them on the section views.
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
I have a profile view with the existing ground profile shown. The alignment the profile is referencing was stretched at the front and now the profile markers do not line up with the profile line. The profile line updated as it should have, but the markers did not.
I am trying to turn off some markers shown below in magenta (the circles). The problem is, I've gone through the Alignment Styles and can't seem to locate the layer that these markers are actually part of.
Why do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit C3D 2014 SP1 Dell M6600, Core i7 @ 2.3GHz, 16 GB ram Dell T3500 workstation, too much ram
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
When I change the annotation scale for selected text and leaders, most of it shoots into space. I have tried one at a time and many, all with the same result.
The text size looks correct, the leader looks fine, but the text x coordinate changes radically.
Changing from 1:1 to 1:15,000
Does this mean I have to relocate every leader text back to something normal, or am I missing something.
I am trying to create a feature line style that would include markers similar to minor stations of an alignment at the End Points and 1/4D, 1/2D & 3/4D locations. The thought is that I could use these on curb returns, and the markers would identify the locations we provide construction staking.
We have survey files that we xref into our design files. In the survey files themselves, the points don't change color. When we xref them in, the point markers (only the circular node on the actual point, not the line coming off of it) take on the color of whatever the current layer is in the drawing, only fixable by changing the current letter and regenerating.
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
I have C3D 2012. I want to label a part of an arc. The arc has 3 lines that intersect it. I want to label the overall arc and the pieces of the arc. The overall arc is not a problem. How can I label the parts of the arc without breaking it up?
I keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
I have applied a client's style to the alignment to show PI's. In this case we have 2 alignments close to each other (NB & SB of road). PI's close to each other will then overlap. What I would like to do is apply a style that will have the line and text go exactly in the opposite direction. I am trying to avoid dragging the text as that seems to bring up several more issues. I am looking for whatwhere to change within the style editor to make this happen.
C3D 2012 sp1 W7Pro 64bit HP Z400 Workstation 16 GB RAM Intel Xeon CPU W3565@3.20GHz NVIDIA Quadro 4000
Need writing an expressions in a label style. I have part of it working, it is {Rim to Sump Height}-6 now I would like it to put 0 if it is 0 or less but I don't know how to do it. It works great on positive number but I want it to put 0 if it is a negative number.
Is there a way to label the low point of a profile or alignment that doesn't have any vertical curves? We have an existing alignment and profile which is relatively flat, and we'd like to establish and label the low points for drainage improvements.
Any way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
we are in a situation where we want a dynamic wall label. how can i make that happen if technically the top of wall and bottom of wall are at two different x and y points. ideally i would like have one label and list it this way by referencing surface elevations:
How to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
