AutoCAD Civil 3D :: Profile Pipe Label - Dragged State Anchor?
Sep 24, 2009
The labels normal anchor point is the bottom outside diameter of the pipe, but when dragged the anchor snaps back to the cl of the pipe.
The only workaround I was able to come up with is a "static" leader made up of two lines and an arrowhead block, which you can only slide up or down the pipe with the desired appearance but can't stretch.
The attached image shows the Civil 3D pipe label above and the desirable text/leader legacy version below.
View 1 Replies
ADVERTISEMENT
Jun 24, 2013
I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies
View Related
Jan 30, 2013
I'm trying to set up my point label styles and I don't understand how the dragged state settings work. The default setting is "as displayed" but then the leader does not flip, if I change the settings to "stacked text" the leader flips but the text is out of order. See the attached plot of some points to see what I mean, default on the right and stacked text on the left.
How can I set the point label so the leader will flip and keep the label components in the default order?
View 7 Replies
View Related
Mar 27, 2012
I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies
View Related
Dec 27, 2012
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies
View Related
Apr 11, 2013
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
View 9 Replies
View Related
Aug 5, 2013
Civil 3D 2013, SP2
Settings > Pipe Network > Right Click > Edit Feature Settings > Default Profile Label Placement, gets you to this point:
Does the highlighted line only apply at the time that the label is placed? I have multiple sewers to label and I want to each set of labels at a different elevation. Changing this default will have NO effect on existing labels?
View 3 Replies
View Related
Oct 29, 2013
A method (possible expressions) to create a profile view label that can reference pipe or structure data?
View 5 Replies
View Related
Jul 30, 2013
Water main pipe network profile labels for structures do not attach to the structure properly in C3D 2014 (this same label style works fine in all previous versions of the software, through the 2013 release). The labels come into the drawing at a northing of 0 rather than attaching to the structure itself. However, if you grip edit and reset the labels, they reset to their correct attachment point. Additionally, if you attempt to grip edit the profile labels with Ortho mode on, it moves the label back to a northing of 0. I've created a new block for the structure, but that does not resolve the issue.
I've included a link to a Chronicle video that demonstrates the label behavior. [URL] .......
View 3 Replies
View Related
Jun 21, 2012
how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?
View 1 Replies
View Related
Nov 12, 2013
Is it possible to keep the dragged labels in the same configuration when import the same points with the same numbers second time (with different descriptions) choosing overwrite option? I want to avoid to move the points second time to make the drawing readable.
View 9 Replies
View Related
Jun 6, 2013
When dragging the point labels the arrow pulls away from the point. Is there a way to get the machine to have the arrow to touch the point it labels.
View 4 Replies
View Related
Sep 9, 2009
I have an alignment label that uses "dot blank" in the dragged state. In the drawings that the alignment is xreffed into, the leader converts to "closed filled".Why? How do i fix it?
C3D 2008
View 8 Replies
View Related
Nov 26, 2013
I am trying to line up labels in a dragged state. When I select the label and move it I can line it up nicely (as shown by the 6" V&B looking in line with the hydrant. When I select the point, the label shifts left (as shown by the 6" V&B far left). Is there a neat way to line up multiple labels? Civil 3d 2012
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 1 Replies
View Related
Jan 4, 2013
When I drag text away from my point there is no leader. I have gone thru everything I can think of in Label and Point styles. I know its probably a simple fix. Somewhere down the rabbit hole is a box that needs/or not a check.
View 2 Replies
View Related
May 17, 2012
When creating a style, (for example a Spot Elevation style), I'd like it to be in a dragged state upon insertion, rather than having it plop down right at the point and then having to click and drag it off to where I want it.
I can't seem to find the option to change this though..........
View 4 Replies
View Related
Jun 6, 2012
In Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
View 7 Replies
View Related
May 9, 2012
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
C3D 2012
Dell T7400, 4GB RAM, Win 7 64 bit
Nvidia Quadro 4600
View 4 Replies
View Related
Nov 26, 2013
is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 3 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Dec 21, 2012
Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies
View Related
Jan 27, 2013
Profile View Band Styles, Vertical Geometry and Horizontal Geometry types, include the option to Anchor Labels to True Geometry Locations.
Any image/example showing the difference between the Anchor Label options (Segment in Band and True Geometry Location) in Vertical and Horizontal Profile View Bands.
View 5 Replies
View Related
Jan 30, 2013
I am trying to create surface elevation labels along a polyline and I am having an issue with the label anchor point. I have created a line label style that uses a reference text to produce the elevation from a specified surface, however when I insert the label the default anchor point for the label is in the center of the line segment and that is where the reference text is taking the surface elevation. I am looking for the elevation of the surface at the start of each line segment, and I do not know how I can make it stop defaulting to the center of the line segment.
Attached is an overview of what my labels look like, where the anchor point is, and the layout properties within my label style. I am using C3D 2012.
View 9 Replies
View Related
Aug 8, 2013
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
View 2 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Jul 15, 2013
i need to label the same pipe in 2 different profiles
View 2 Replies
View Related
Aug 13, 2013
I want to make a pipe label for a plan view that shows the inner dia and pipe material. Howver, material is no one of the choices it gives me for a label part. Is labeling material possible?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 4 Replies
View Related
May 7, 2013
I created this label for my pipe crossing. I want to be able to start the vertical line at the invert, and be able to move the text up and down and have the line adjust.
Currently my dragged state has the arrow head size as 0 and visibility as false, since it starts the leader at the centerline of the pipe. But without using the leader, I cannot adjust the vertical line dynamically.
View 2 Replies
View Related
Jul 26, 2013
I need to add label in a pressure pipe in the profile view.
How can I do it?
Selecting a pipe and using add label doesn't work, it works in plan but not in profile.
View 4 Replies
View Related
Jun 19, 2012
How do I get Civil 3D to put pipe elevation labels at even stations?
View 1 Replies
View Related
