AutoCAD Civil 3D :: Label Same Pipe 2 Profiles?
Jul 15, 2013i need to label the same pipe in 2 different profiles
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Depicting Both Slice And Cross Cut Pipe Profiles Of One Pipe
Jan 8, 2014One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Include Pipe Min / Max Cover As Part Of Str / Pipe Label
Nov 26, 2013is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Civil 3D :: Pipe Junctions To Show In Profiles
Jun 13, 2012How do you get pipes to show on the profiles when there is a side pipe from a different alignment that enters an inlet?
I went to Profile View Properties / Pipe Networks and checked the side pipe to draw and changed the style overide to crossing, but nothing shows in the profile.
2013 Civil 3D
AutoCAD Civil 3D :: Straightening Pressure Pipe Profiles?
Apr 24, 2012I'm slowly getting familiar with the new pressure pipe tools. So far I like the layout compass but I'm finding the rest to be rather cumbersome to work with.
One problem I have is how to straighten portions of a pipe in profile after fitting it to a surface profile. Each pipe ends up segmented according to it's cut length property. Typically after fitting it to a surface profile we want to straighten the pipe between critical points along the profile. I don't see any way to do this aside from dragging each segment. Is there a way to remove, add or adjust the length of individual segments?
I don't see any other than the videos provided in the new features catalog.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
AutoCAD Civil 3D :: Pipe Invert Labels In Profiles?
Oct 15, 2012I am trying to place my pipe invert labels at the actual point of the invert. When using the pipe label style composer, I have selected Anchor Point to be "Bottom Inner Diameter". Why is it that the label style still imports into the center of the pipe? No matter which anchor point I choose the label still inserts to the middle of the pipe. Is there a hidden setting that I am missing?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
AutoCAD Civil 3D :: How To Work With Structure And Pipe Profiles
Nov 13, 2013Going through the API, I can't find a class that would let me work with pipe or structure profiles.
View 4 Replies View RelatedAutoCAD Civil 3D :: Reference Text Label For Profiles
Jul 18, 2012I can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.
However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.
Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.
AutoCAD Civil 3D :: Changing Vertical Exaggeration Of Pipe Profiles
May 7, 2013I have a profile with pipes and labels. I need to change the vertical exaggeration.
I can change the profile view style graphic exaggeration, but the pipes and associated labels do not rescale. Is there a way to force the pipes and labels to update to the new vertical exaggeration?
AutoCAD Civil 3D :: No Pipe Material In Label Maker?
Aug 13, 2013I want to make a pipe label for a plan view that shows the inner dia and pipe material. Howver, material is no one of the choices it gives me for a label part. Is labeling material possible?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Pipe Crossing Label Leader?
May 7, 2013I created this label for my pipe crossing. I want to be able to start the vertical line at the invert, and be able to move the text up and down and have the line adjust.
Currently my dragged state has the arrow head size as 0 and visibility as false, since it starts the leader at the centerline of the pipe. But without using the leader, I cannot adjust the vertical line dynamically.
AutoCAD Civil 3D :: 2014 Pressure Pipe Label
Jul 26, 2013I need to add label in a pressure pipe in the profile view.
How can I do it?
Selecting a pipe and using add label doesn't work, it works in plan but not in profile.
AutoCAD Civil 3D :: Pipe Elevation Label At Stations
Jun 19, 2012How do I get Civil 3D to put pipe elevation labels at even stations?
View 1 Replies View RelatedAutoCAD Civil 3D :: Get Block Component In Pipe Label?
May 29, 2012I was wanting to know it it is possible to get a block component out of a pipe label with the API to project onto a profileview.
The reason a want this is that to label lot connections in the form of a wye connection I typical use a pipe label with a stick block at 45 degress to represent the connection then explode it and use project to profile view command so the lot connection applies there as well. Just wanting to do it faster thru using code if it can be done.
AutoCAD Civil 3D :: Pipe Network -> Profile Label Placement
Aug 5, 2013Civil 3D 2013, SP2
Settings > Pipe Network > Right Click > Edit Feature Settings > Default Profile Label Placement, gets you to this point:
Does the highlighted line only apply at the time that the label is placed? I have multiple sewers to label and I want to each set of labels at a different elevation. Changing this default will have NO effect on existing labels?
AutoCAD Civil 3D :: Pipe Network Structure Label Layers
Jan 8, 2013I have a pipe network created that is shown in multiple drawings. I created labels for the structures showing Rims and Inverts. How to put the Rim info on a different layer than the Invert info? Right now the label has 3 different components...I feel like there has to be a way to put each component on different layers...
View 6 Replies View RelatedAutoCAD Civil 3D :: Specific Structure Label - Pipe Network
May 21, 2013I need to make a structure label that defines the "PIPE FALL" for each incoming pipe. By "PIPE FALL", I mean the elevation difference between the bottom of the structure and the incoming pipe invert elevation.
Actually, I thought it was going to be pretty simple, just by doing:
PIPE FALL = INCOMING PIPE INVERT ELEVATION - OUTGOING PIPE INVERT ELEVATION <CONNECTED PIPE OPPOSITE STRUCTURE NAME>
or
PIPE FALL = INCOMING PIPE INVERT ELEVATION - SUMP ELEVATION <CONNECTED PIPE OPPOSITE STRUCTURE NAME>
I just need to define the elevation difference between the bottom of the structure and the incoming pipe invert elevation.
AutoCAD Civil 3D :: Profile Label Reference To Pipe Data
Oct 29, 2013A method (possible expressions) to create a profile view label that can reference pipe or structure data?
View 5 Replies View RelatedAutoCAD Civil 3D :: Label Pipe Crossing In Section View
Aug 13, 2013Is it possible to label a pipe crossing offset in section view dynamically? I see there are options to label start offset and end offset, but not at the actual crossing.
View 5 Replies View RelatedAutoCAD Civil 3D :: Entire Pipe Network Label For Sections?
Jan 9, 2013i'm trying to label pipe networks in my section views. i hit the 'entire network section' option and it just labels 1 pipe in 1 section. i would think it would label the 1 pipe in every section or every pipe in 1 section. is this how it's supposed to work? is there a workaround?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Structure Label - Pipe Inlet And Outlet Elevation
Dec 10, 2013I would like to know if it is possible to display the pipe inlet/outlet elevation in my structure label. It seems like it is not possible.It is possible to use the inlet/outlet elevation of the pipe in my pipe label however I would like to display it in my structure.
View 2 Replies View RelatedAutoCAD Civil 3D :: 2014 - Pipe Network Structure Profile Label
Jul 30, 2013Water main pipe network profile labels for structures do not attach to the structure properly in C3D 2014 (this same label style works fine in all previous versions of the software, through the 2013 release). The labels come into the drawing at a northing of 0 rather than attaching to the structure itself. However, if you grip edit and reset the labels, they reset to their correct attachment point. Additionally, if you attempt to grip edit the profile labels with Ortho mode on, it moves the label back to a northing of 0. I've created a new block for the structure, but that does not resolve the issue.
I've included a link to a Chronicle video that demonstrates the label behavior. [URL] .......
AutoCAD Civil 3D :: Use An Expression In Data Band Label For Pipe Network?
Jun 14, 2013Am I limited to the fields that appear on the label for a pipe network data band, or can I add my own customized expressions?
Using Building Design Suite Ultimate 2014
AutoCAD Civil 3D :: Profile Pipe Label - Dragged State Anchor?
Sep 24, 2009The labels normal anchor point is the bottom outside diameter of the pipe, but when dragged the anchor snaps back to the cl of the pipe.
The only workaround I was able to come up with is a "static" leader made up of two lines and an arrowhead block, which you can only slide up or down the pipe with the desired appearance but can't stretch.
The attached image shows the Civil 3D pipe label above and the desirable text/leader legacy version below.
AutoCAD Civil 3D :: Pipe Profile Station Label Shows Question Mark
Jun 21, 2012how to update the information? I revised the pipe alignment but the profile did not update the station. WHat steps do I need to perform?
View 1 Replies View RelatedAutoCAD Civil 3D :: 2013 - Dynamic Surface Profiles Acting As Static Profiles
Nov 14, 2012I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
AutoCad :: Way To Label A Pipe?
Feb 3, 2012What is the proper way to label a pipe?
I've got a leader pointing to the pipe and stating:
LOW CARBON STEEL PIPE 2.875" O.D.
AutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View
Nov 20, 2013Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole
Sep 25, 2012I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedAutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure
Jun 20, 2012Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedAutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View Related