AutoCAD Civil 3D :: Straightening Pressure Pipe Profiles?
Apr 24, 2012
I'm slowly getting familiar with the new pressure pipe tools. So far I like the layout compass but I'm finding the rest to be rather cumbersome to work with.
One problem I have is how to straighten portions of a pipe in profile after fitting it to a surface profile. Each pipe ends up segmented according to it's cut length property. Typically after fitting it to a surface profile we want to straighten the pipe between critical points along the profile. I don't see any way to do this aside from dragging each segment. Is there a way to remove, add or adjust the length of individual segments?
I don't see any other than the videos provided in the new features catalog.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
View 1 Replies
ADVERTISEMENT
Jan 8, 2014
One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies
View Related
Apr 20, 2013
When I create a new pressure network in 2014 - I have only Tees & Elbows available - Where are crosses? I need a 4-way cross at an intersection, C3D seems to include just the other two types I listed.
View 3 Replies
View Related
May 31, 2013
I'm in the process of creating content for "pressure Pipe networks". I have created a number of pipes (HDPE, PVC and steel, sizes ranging from 20mm to 200mm). I have also created a number of Tees (Equal and reducing).
My question is.
If you draw in pressure pipe say 90mm ø and the insert a fitting say a 90x75x90 reducing Tee into the line. Then you wish to extend the pipe from the 75mm ø branch, it does not pick up it should be a 75mm pipe but defaults back to the setting (90mm) that you drew the original pipe line in, you have to change the default pipe type to 75 before extending the 75mm pipe from the Tee.
Below I have included a couple of screen shots.
View 2 Replies
View Related
Jan 16, 2013
I have created a pressure pipe network (Plan view) from own created pipes and fittings, try to create an alignment from the network but C3D tells me that the selected network part has no connected parts?
How would I connect the network in order to create an alignment? (the pipe network has got a command to do that)
View 2 Replies
View Related
May 1, 2012
Loving Pressure Pipes so far, taking us a bit to get them setup to work the way we want.
Using Pressure Pipes to design two water mains, the first main is a straight run, and the second one starts off of a Tee that I added to the first. This part seems to be working fine, now when I go back and use the Create Alignment from Pressure Network to create the alignment for the first main everything seems fine, but the second one is where I am running into my problem. When creating it, if I don’t select the Tee that I used as the starting point the two alignments don’t intersect, however if I do select it something crazy happens, my start point for my second alignment snaps to 0,0 instead of the Tee. I have tried a couple of different times with both Tees and Crosses. I get a little bit of a different result with Crosses, if the cross is the start Point of the alignment it behaves the same as a Tee, snapping to 0,0, however if the alignment goes through the Cross it is created correctly.
View 3 Replies
View Related
Oct 16, 2013
I have a watermain project and am going to design by Civil3d2013.
I just realized that Civild3d has 90-45-22.5-11.25 which are excellent for waterworks.
What should I do for degrees less than 11.25 .
View 4 Replies
View Related
Sep 24, 2012
We just upgraded to 2013 and supposedly I should click the home tab -> pipe network -> pressure pipe network. But it isn't there. I can see that option in my toolspace and prospector, just nothing in my ribbons.
View 6 Replies
View Related
Nov 14, 2013
How do you change the pressure pipe description ex. Ductile Iron to DIP? Or can you change it at all?
View 1 Replies
View Related
Jul 23, 2013
I layed out a pressure netowrk horizontally using 6" pvc pipe. It includes some 45 degree bends and such and even some curved pipe. Now the engineer wants to adjust the alignment in the area of the curved pipe.
First of all the modify area in the ribbon on the plan layout tools for pressure pipe is an absolut joke. It lets me break a pipe (which deletes one end of it), move a pipe (but the attched pipes don't move), or slide a pipe (whatever that's supposed to do).
If I grip edit a curved pipe, this will not work. The curved and tangent pipes will now no longer be tangent to each other and when laying out an alignment on the pipe itself, the curves will not work correctly when going to stake it out.
View 2 Replies
View Related
May 21, 2013
I'm currently using the "Pressure Pipe" app in Civil 3D. The thing is, I need to create pipes that are smaller than 100mm (that's the smallest pipe in the catalog). Specifically, I need 50mm and 75mm diameter pipes, parts and accessories. How can I create them?
View 3 Replies
View Related
May 4, 2012
I was so excited to hear about the new pressure pipe networks that I had to get into the software. What I have found is both promising, and a little bewildering. The promising aspects are that the pressure pipes appear to act and function effectively, and in a manner consistent with real world design that is easy to understand and use. Kudos to Autodesk!
That being said, I do have a couple of complaints. First, the pre-loaded fitting and appurtenance libraries are very limited when it comes to sizes and materials that are more commonly found in the land development arena I work in (8" PVC is our bread and butter). Hopefully, additional resources are forthcoming - they usually are.
Second, and more importantly, I can't figure out a way to data reference a pressure pipe network. If we can't data reference the pressure pipe network, then we really can't use them at all, which would be very disappointing.
View 4 Replies
View Related
Jul 26, 2013
I need to add label in a pressure pipe in the profile view.
How can I do it?
Selecting a pipe and using add label doesn't work, it works in plan but not in profile.
View 4 Replies
View Related
Jan 10, 2013
I just loaded Autocad 13 and was wondering if there is a larger part list library available for pressure pipes.
ie more valves, fire hydrants, backflow preventors
View 1 Replies
View Related
Jul 15, 2013
I am currently using C3D 2013 for pressure pipes. how to rotate a TEE with the branch pointing down in plan? Currently the TEE will come in with the branch pointing only horizontal in plan.
View 3 Replies
View Related
Apr 26, 2012
I want to create some custom parts, but before I can even get that far, every time I create a new pipe it doesn't work in cad. I want PVC at the end of the day, but I tried to create 3" ductile iron with all the same options as the other pipes in the catalog and it won't draw in CAD. It will let me add the pipe size to the parts list and I can select it when I try to draw the pipe, but when I click in the drawing it goes to 0,0 and won't add any pipes to the drawing.
View 9 Replies
View Related
Nov 20, 2013
Using the Pressure Pipe Network in Civil3D 2013? I just recently began developing an Apputenace library for all the parts we use that were not included with the program. I have run into a few big issues that could prevent our firm from using this potentially useful tool. One issue, does the PPN posses the ability to create structures like manholes? This could be a really break point for using it to do a sewer line. Another, how well does it interact with multiple surfaces? If I have two surfaces butted up to one another how to a get a PPN from point A on surface 1 to point B on surface 2 and have that PPN respond at the correct bury depth while creating the correct fittings? As I experiment more this this tool I feel as if there are way more questions about what it can and can't do compared to what a regular pipe network does.
View 1 Replies
View Related
Apr 17, 2012
The default parts catalog is a good start, but for production watermain design, it is lacking. How do I add new fittings and appurtenances to the content catalog? I know how to add/modify existing pipe/fittings properties, but there does not appear to be a way to add new fitting models.
View 9 Replies
View Related
Aug 28, 2012
So I created a pvc pressure pipe to use in addition to the ductile iron pipe that comes with the software. Problem is, when I draw my pipes, the compass doesnt disply the different bends at which I can use. If I switch to the ductile iron pipe that came with the software, all my bends show up that I can draw at. Why dont they show up on the compass for my pipe I made?
View 5 Replies
View Related
Dec 22, 2013
I downloaded the C3D 2014, and trying it. When i discovered the new function, i try to draw a pressure pipe network.
After i was take the design, there is no any object in the model space. Nothing.
There are a full list of pipes and structures in the tool space tree menü. When i just click the network name and select it, i get all of information about the planned network but i can't see any object, lines or other in the model space. All layout viewable, What is the problem with it?
View 6 Replies
View Related
Feb 8, 2013
I just recently had to do a clean install on Civil 3D 2013 to fix a different problem but now I am having issues with the pressure pipe catalogs. I used to be able to open and use all three that are available, push on, mechanical, and flanged. I made sure that my support paths are mapped to the correct folders but now when I open my design file I find that the mechanical and flanged catalogs are greyed out. When I try to edit the part catalog I get a warning message saying that the catalog is not available. See the attachment. I know the catalogs are there as I have created parts and added them to these catalogs. It almost looks like it is mapping to the metric folder which only has the push on catalog.
View 9 Replies
View Related
Aug 2, 2012
So I wanted to put my existing 2d linework for a water main into a pressure network. I have done quite a bit of reading about pressure networks and the lack of different pipe materials and apputenances to choose from. It seems as though the fittings are all there for the most part.
The way I understand it is the only pipe material that is shipped with C3D is Ductile Iron and if you want PVC or something else, you open the content catalog editor and change the dutile iron pipe to polyvinyl chloride (PVC). Am I on the right track here?
As far as appurtenances go, when I open up the Content Catalog Explorer there is nothing for hydrants, valves, wyes, etc...... Is the only thing I can show then bends?
View 2 Replies
View Related
Nov 8, 2013
I think this question should be so easy to answer, that I am feeling a bit foolish for asking, but here goes. I am trying to set my pressure pipe catalog, but when I browse to C:ProgramDataAutodeskC3D 2014enuPressure Pipes Catalog and hit open, I get a dialogue that states "There are no Pressure Network Catalogs in this folder". I have tried selecting folders farther down the list (Imperial, Imperial_AWWA_Flanged, etc) with no success. I have opened the sqlite files using the Content Editor, and I can see all the parts and sizes there. I just can't figure out how to open the catalog from Civil 3D.
C3D 2014, SP1
Dell Precision T3500, Windows 7 64-bit
View 7 Replies
View Related
Feb 7, 2013
Since 2013 is the first version to have pressure networks, do I need to explode the objects before saving to a previous version? Or is there another method? I will lose all my properties if I explode the objects I believe...
View 2 Replies
View Related
Feb 7, 2013
I created a pressure pipe with no bends since my alignment is fairly straight. However, I'm changing the elevations on the pipe using a combincation of the profile view snaps and elevation edits in the properties and it doesn't restrict my deflection to my deflection settings not does it add any bends.
Is this still a missing function in Pressure Networks? Or is there something I'm missing?
View 1 Replies
View Related
Apr 11, 2012
I've been really excited to know Pressure Network modelling is finally coming to Civil 3D with 2013 release. However I've got no clue why any pipe data won't display in Profile View.This makes absolutely no sense in pressure network profiling since you can't output any pipe data to profile view tables. Note pipe data outputs great for regular Pipe Network profile views.
Another thing I'm disappointed in is no ability to output Uphill Tangent and Downhill Tangent for pressure network pipes. Both values are given in Vertical Geometry Band type. Thus they are being obtaned from Profile but not Pressure Network Pipe data. Since in Pressure Networks it's only a couple of pipes that are being curved to match surface line it's impossibe to get Tangets. Sure you can duplicate surface profile and get required data using Vertical Geometry Band type. But it make no sence since it's too much hustle.
I'm quite sure I'm missing something here. Probably there's a way to add required data styles to Band types? Or modify Label styles Contents data sources?
View 9 Replies
View Related
Apr 16, 2012
In plan I show a pipe main as a thick line with a certain linetype whether it be for storm, sanitary or water. I have acheived this by selecting only pipe centerline under the display tab in the pipe style editor and then under pipe centerline options specifiying a width for the pipe. I don't see the centerline options for a pressure network pipe.
View 1 Replies
View Related
Aug 6, 2012
Wanted to know if there is a way to place pressure pipes at variable depths.
We got inspector notes which show the depths at each end of the pipes.
And I notice that under Pipe Properties, Part Properties tab, and under Geometry there is Start Cover and End Cover.
But both are greyed out.
Is it possible to use Star Cover and End Cover to design the pipes?
Using Infrastructure Design Suite Premium 2012
View 9 Replies
View Related
Mar 1, 2013
I have tried to bring in the 3d block for a fire hydrant, exploded it and combined as 1 solid, added connection point. When using the Civil 3D 2013 "publishpartcontent" command it ask me to save the .content file but when creating the png it outputs an error in the command line. When I go to bring in the content in the catalog edditor I recieve an error saying .content file units do not match catalog. I have tried bring the part into both metric and imperial catalogs and recieve the same error. I also tried creating just a cylinder soli in a new draiwing and publishing the content file, I still recieve the error when it tries to create the .png but when I load it into the catalog it works. Is there any way to set the units of the solid within civil 3d before creating the .content file.
C3D 2013 SP1,
Win 7 64, Core i7,
16 GB RAM, Quadro 400
View 1 Replies
View Related
Jun 29, 2012
I was wondering if you can create rules for a pressure pipe network similar to the rules that you can create for a pipe network. I would like to create a cover and length rule for my system. So far I saw that you can set a cover before drawing out the pressure network but I do not know how to edit that after the pressure pipes are drawn in.
View 7 Replies
View Related
Aug 4, 2013
I know storm and sewer design possible. But I cannot know if possible to design the pressure network pipe layout?
View 9 Replies
View Related
