AutoCAD Civil 3D :: Label Text To Be Center Justified In Dragged State Stacked Text
Apr 11, 2013
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
View 9 Replies
ADVERTISEMENT
Mar 27, 2012
I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies
View Related
Jun 24, 2013
I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies
View Related
Jan 30, 2013
I'm trying to set up my point label styles and I don't understand how the dragged state settings work. The default setting is "as displayed" but then the leader does not flip, if I change the settings to "stacked text" the leader flips but the text is out of order. See the attached plot of some points to see what I mean, default on the right and stacked text on the left.
How can I set the point label so the leader will flip and keep the label components in the default order?
View 7 Replies
View Related
Sep 24, 2009
The labels normal anchor point is the bottom outside diameter of the pipe, but when dragged the anchor snaps back to the cl of the pipe.
The only workaround I was able to come up with is a "static" leader made up of two lines and an arrowhead block, which you can only slide up or down the pipe with the desired appearance but can't stretch.
The attached image shows the Civil 3D pipe label above and the desirable text/leader legacy version below.
View 1 Replies
View Related
Feb 22, 2013
I'm trying to use diagnol fractions in my label text for 1/2 and 1/4 deltas. It displays and seems to work fine in Autocad, but when I plot, the numbers have trouble displaying themselves.
I'm using a light color from our .ctb, so I thought that was the problem, but that doesn't seem to be the case (I tried two heavier lineweights and it only got worse). Increasing the percentage size of the fraction also has no effect.
View 1 Replies
View Related
Dec 27, 2012
My dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies
View Related
Nov 12, 2013
Is it possible to keep the dragged labels in the same configuration when import the same points with the same numbers second time (with different descriptions) choosing overwrite option? I want to avoid to move the points second time to make the drawing readable.
View 9 Replies
View Related
Jun 6, 2013
When dragging the point labels the arrow pulls away from the point. Is there a way to get the machine to have the arrow to touch the point it labels.
View 4 Replies
View Related
Sep 9, 2009
I have an alignment label that uses "dot blank" in the dragged state. In the drawings that the alignment is xreffed into, the leader converts to "closed filled".Why? How do i fix it?
C3D 2008
View 8 Replies
View Related
Nov 26, 2013
I am trying to line up labels in a dragged state. When I select the label and move it I can line it up nicely (as shown by the 6" V&B looking in line with the hydrant. When I select the point, the label shifts left (as shown by the 6" V&B far left). Is there a neat way to line up multiple labels? Civil 3d 2012
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 1 Replies
View Related
Jan 4, 2013
When I drag text away from my point there is no leader. I have gone thru everything I can think of in Label and Point styles. I know its probably a simple fix. Somewhere down the rabbit hole is a box that needs/or not a check.
View 2 Replies
View Related
May 17, 2012
When creating a style, (for example a Spot Elevation style), I'd like it to be in a dragged state upon insertion, rather than having it plop down right at the point and then having to click and drag it off to where I want it.
I can't seem to find the option to change this though..........
View 4 Replies
View Related
Jun 6, 2012
In Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
View 7 Replies
View Related
Oct 24, 2012
I like using the edit label text in the lable styles to add additional text and information.
I can turn on / off the backroung mask for all the style but not each.
Is there a way to turn on / off the backround mask of each layout text.
I'm using civil 3d 2012 and testing 2013.
View 1 Replies
View Related
Jan 3, 2013
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies
View Related
Jul 5, 2012
How do I set it so that when I type fractions in a text box it automatically keeps them as non-stacked fractions rather than horizontally or diagonally stacked?
View 2 Replies
View Related
May 9, 2012
I have note labels in one drawing. An Elevation style that list the elevation of the insertion point. The label texts are dragged to new locations. When I xref this drawing in to another. The label text shows at both the insertion points and the dragged locations. What's going on??
I've made sure the labels aren't duplicated on another layer. If I change the layer of the dragged text and do an Xlist in the drawing they're xrefed in to. The dragged text list on the layer I've change it to. The text in the original position lists on layer 0, which is the default layer for creation.
C3D 2012
Dell T7400, 4GB RAM, Win 7 64 bit
Nvidia Quadro 4600
View 4 Replies
View Related
Aug 31, 2012
Why does no node appear on Left justified text, yet it appears on right and center justified text?
View 8 Replies
View Related
Mar 2, 2012
I have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies
View Related
Dec 21, 2012
Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies
View Related
Feb 22, 2012
I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
View 4 Replies
View Related
Nov 20, 2003
the last 4 justifcation tools in the paragraph palette i can't select
View 1 Replies
View Related
Feb 4, 2013
I keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
View 9 Replies
View Related
Jul 9, 2013
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies
View Related
Apr 11, 2013
I am trying to scale down my label text insdie of my viewport. Its about twice the size that i would like.I tried to use the scale command but nothing happens.
View 3 Replies
View Related
Sep 20, 2013
I am right and left justifying Times New Roman italics text. At the right side of the text box, the last letter of each line is partly cutoff/disappeared. It's like the right side of the text box is too tightly positioned around the text.
View 12 Replies
View Related
Nov 25, 2013
I have used illustrator for years and all of a sudden when I justify text and add a soft return to knock a 'widow' or single work round the text no longer justfies! WHY? and can I turn this dumb feature off...?
View 3 Replies
View Related
Sep 27, 2012
At the moment, I'm labeling features on my drawing with stations/offsets, but this question really applies to all label settings - is there any way to restrict the label text to be in all caps? I know I can just type in the station/offset labels manually but I'd like to be able to use the automatic-updating functionality of AutoCAD 3D.
View 2 Replies
View Related
Jul 18, 2012
I can create single alignment labels (fixed point, offset etc) that show a chainage and, by using reference text, a profile level for an associated profile.
However, using the main labels that are used for displaying chainages along an alignment (alignment chainage label group) I can also add in a reference text label for profiles here, alongside the chainage one, but there is no option to set which profile it references so it just displays '???'.
Getting the alignment labels to also display associated profile levels at every chainage point would be incredibly useful.
View 8 Replies
View Related
May 22, 2013
I need to get a station and offset for a bunch of points and have it show up in the point label. i can't find reference text in the label style so i was wondering if there was a good workaround.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 3 Replies
View Related
