GIMP :: Right Justified Italics Cut Off On Right Side Of Text Box?

Sep 20, 2013

I am right and left justifying Times New Roman italics text. At the right side of the text box, the last letter of each line is partly cutoff/disappeared. It's like the right side of the text box is too tightly positioned around the text.

View 12 Replies


ADVERTISEMENT

CorelDRAW X5 :: Replacing Text With Italics

Jan 12, 2012

I have a Corel file that contains the index to my book. I would like to change all the numbers (just the numbers) to italic. Is there any way to do this with the Find and Replace text ( or any other) command? I don't see any formattting parameters for replacing text in the dialogue box. 

View 14 Replies View Related

AutoCAD Civil 3D :: Label Text To Be Center Justified In Dragged State Stacked Text

Apr 11, 2013

In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged.  This is working fine with 'Stacked Text'

What is not working is the text justification.  I want it to remain centre justified, as it is composed.  But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state.  I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified.  Am I missing something here?  Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text?  And if not, why not?

I'm in 2011.  

View 9 Replies View Related

Photoshop :: Justified Text

Nov 20, 2003

the last 4 justifcation tools in the paragraph palette i can't select

View 1 Replies View Related

CorelDRAW X4 :: Paste Text From Word And Retain Bold And Italics?

Jul 26, 2009

I got a word doc file but when I copy and paste the text into coreldraw I lose all the italics and bold. It's 4 pages with lots of bold and itallics and needs to be reflowed in draw but retain exact italics and bold. When I paste it into draw, I lose all the bold/italic formatting. Are there any workarounds to get the bold and italic text to copy and paste into draw?

View 17 Replies View Related

Photoshop :: Pasting Text From Word Program While Retaining Same Italics Formatting

Feb 18, 2013

I'm looking for a way to be able to copy text from another program (Microsoft Word) and then, using the Text tool in Photoshop (CS6), paste that text, but where it retains the correct italics formatting I had in the other program--and not as an image of text (Ctrl+P), in which the formatting is present, as a flat image, but rather as an actual unpasteurized and editable Text layer.

For example, the sentence “I told you..” where 'told' is italics, simply pastes into Photoshop as "I told you.." without the original formatting. Is there a way to get Photoshop to recognize formatting from pastes without my having to manually re-apply the formatting myself? This would be a hassle over a long period of time. If necessary I would be willing to use a plug-in that allows for this sort of recognition.

View 7 Replies View Related

GIMP :: How To Make A Banner That Shakes / Blurs From Side To Side

Nov 27, 2012

How to make a banner that shakes/blurs from side to side?

[URL]....

The link above is an image of what I'm talking about. (The black banner that says Diamonds aren't forever)

View 1 Replies View Related

Illustrator :: Soft Returns In Justified Text?

Nov 25, 2013

I have used illustrator for years and all of a sudden when I justify text and add a soft return to knock a 'widow' or single work round the text no longer justfies! WHY? and can I turn this dumb feature off...?

View 3 Replies View Related

GIMP :: Put Two Images Side By Side Then Convert Into One Image?

May 22, 2011

I want to generate a single image which compares two different images side by side. Can Gimp do this?

There was a tab called "new" which enabled me to generate the white background needed to do the merging. One of those little details the author forgot to mention. They just said " Open the first image as a new layer and move it to the left" without mentioning that you had to find the "new" key and put in the white background first!

View 4 Replies View Related

GIMP :: How To Put 2 Animation GIFs And Running Side By Side

Oct 28, 2012

How to put 2 animation GIFs n running them side by side ? btw, i already hv tat 2 GIFs in hand.

View 1 Replies View Related

GIMP :: Put 2 Animation GIFs And Running Them Side By Side?

Oct 28, 2012

may i know how to put 2 animation GIFs n running them side by side ? btw, i already hv tat 2 GIFs in hand.

View 7 Replies View Related

CorelDRAW Graphics Suite X3 :: Text Is Full Justified

Apr 13, 2011

In the attached image the last line gets separated out. The text is full justified and I tried things like hyphenation etc which i read around here but didnt work and still the text in the last line each word gets separated out.

View 7 Replies View Related

AutoCAD 2010 :: Why Does No Node Appear On Left Justified Text

Aug 31, 2012

Why does no node appear on Left justified text, yet it appears on right and center justified text?

View 8 Replies View Related

Illustrator :: Adjust Word And Letterspacing In Justified Text?

Mar 12, 2014

when i add a text to and make it full justify, it leaves lot of spacing and some lines have more spacing between words than other in short it does not look good , how can i make it proper  looking

View 4 Replies View Related

AutoCAD 2010 :: Multi-line Text Won't Stay Justified

Mar 2, 2012

I have a couple of different files that I'm working on that I want a particular text box left-justified.  I will get it left-justified and save the file, but the next time the file is opened the text is centered. 

View 2 Replies View Related

GIMP :: Putting Two Images Side By Side

Apr 14, 2011

When I drag an image into gimp it appears on the new untitled background. And when I drag a second image in, it seems to replace the first image. instead I'd like the images to be side by side. How can i do this?

View 1 Replies View Related

Photoshop :: CS6 / Make Text Go Side By Side When Type?

Apr 2, 2013

How do I make the text go side by side when I type? Mine just pile up. I'm using the alt key and the arrows to make it go side by side right now but there has to be a easier way.

View 3 Replies View Related

GIMP :: How To Duplicate Image Side By Side Then Rotate One Image

Sep 23, 2013

I just started to use Gimp a few days ago. I am trying to duplicate an image side by side, then rotate the one image....just for learning purposes. However the new box (that should have my duplicate image) Is just a blank outline of the rectangle box. I watched a video over and over trying to get this, and I just do not see any steps I am missing, yet on the video it turns out perfect. I am normally pretty good with computers, but evidently not with Gimp.

Here is the Path:
file> open>select and open photo>rectangle tool>outline photo>copy>paste>open new layer>select new pasted layer.
Instead of the photo duplicating itself I get a "blank outlined box".

View 3 Replies View Related

Photoshop :: Font Changes To Italics

Jun 19, 2009

All my sans serif fonts appear in Photoshop are now italicized and will not revert back to the standard format.

View 5 Replies View Related

Photoshop :: Type And Italics

Dec 3, 2005

for some reason all of my type in PS is a little bit italicized.. ill put it on arial regular.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Layer Name In Italics

Sep 3, 2011

I just start using CDx5 and noticed there's some layer's name are in italics.

View 1 Replies View Related

GIMP :: Getting The Opposite Side Of Image (2012)

Jun 26, 2012

I have an image of a car with a view of looking from the back and to the left, i.e.

[URL].......

I would like to change the view from the back and to the right. Does Gimp have the functionality to do that.

View 9 Replies View Related

GIMP :: Make Options Go To Left Side?

Mar 15, 2013

How to make the options go to the left side???

View 2 Replies View Related

GIMP :: Image Doesn't Open In Right Side Layer Window

Mar 2, 2012

When I open a image the image opens in the large center Gimp window but does not open in the right side layers window as a background image. Why not.

I opened a picture of my car & I want to try to change the color. A YouTube Gimp video shows using layers but I don't have a picture of my car in the layers window.

View 6 Replies View Related

Illustrator :: Warping Text On One Side

Mar 14, 2013

I was wondering how I could go about warping the text only on one side like the "Red Ferret" in the image below? Is it all manually done?
 
[URL] ....

View 1 Replies View Related

AutoCAD Civil 3D :: R2013 And R2014 Side By Side / Geotechnics Module Fail?

May 23, 2013

WS with R2013 & R2014 installed side by side.

R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.

View 2 Replies View Related

AutoCAD 2013 :: The Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect

Jan 3, 2014

I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.

View 1 Replies View Related

AutoCAD 2010 :: Plot Two 12x18 Sheets Side By Side On 36" Paper?

Mar 15, 2012

I've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.

Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM

View 4 Replies View Related

AutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect

Jan 3, 2014

I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.

View 2 Replies View Related

3ds Max Animation :: Skin Morph In 2013 - Skewing Vertices Side-to-side Locally

Jan 4, 2013

The problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.

I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).

The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).

I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.

The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).

The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.

The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.

I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip

3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7

View 1 Replies View Related

AutoCAD 2013 :: Application Has Failed To Start Because Its Side-by-side Configuration Is Incorrect

Nov 12, 2013

I have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message: 

C:Program FilesAutodeskAutoCAD 2013acad.exe

The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

what the "application event log" is or the "command-line sxstrace.exe". 

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved