when i add a text to and make it full justify, it leaves lot of spacing and some lines have more spacing between words than other in short it does not look good , how can i make it proper looking
View 4 RepliesI have used illustrator for years and all of a sudden when I justify text and add a soft return to knock a 'widow' or single work round the text no longer justfies! WHY? and can I turn this dumb feature off...?
View 3 Replies View RelatedI'm using an iMac and Illustrator CC. I created a text area box. I want to place text from an outside Word document into the area box. When I go to File>Place and locate the text file, I click on Place. When I'm returned to my Illustrator CC document, the original area box is deselected and my cursor is loaded and ready for me to drag out a new area box. Shouldn't the placed text fill the original area box?
View 3 Replies View RelatedIn the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I wrote the sentence "The quick brown fox jumps over a lazy dog" in Times New Roman regular 12 pt. in Illustrator CS2. The file was saved as a pdf at "press quality." I wrote the same sentence with the exact some font in InCopy CS2 and exported it as a pdf at press quality. As shown in a zoomed-in screenshot from the respective pdfs, the text from Illustrator (top example below) is slightly different than the text from InCopy (bottom example below):
Is it just an unavoidable artifact of the way pdfs are rendered? I realize it's a minor gripe, but even slight bugs/features like this would never be tolerated in a professional publishing environment. What am I not understanding about vector images and/or pdfs?
Everytime I copy text in Word and paste it in Illustrator CS4 to edit, Illustrator considerably slows down.
View 2 Replies View RelatedHow can you changed the text editor to a word processor like word?
View 1 Replies View Relatedthe last 4 justifcation tools in the paragraph palette i can't select
View 1 Replies View RelatedI've been attempting to recreate the text effect on the word BOLLYWOOD.
I've played around with applying a smooth cornered stroke - extruding then attempting to warp the text but have had no joy...
I'm looking to get this looking as close as possible.
I am right and left justifying Times New Roman italics text. At the right side of the text box, the last letter of each line is partly cutoff/disappeared. It's like the right side of the text box is too tightly positioned around the text.
View 12 Replies View RelatedI have a strange happening here with the text re-flowing but breaking mid word (without hypen) if the text box it is in is made smaller in width.
View 6 Replies View RelatedIn the attached image the last line gets separated out. The text is full justified and I tried things like hyphenation etc which i read around here but didnt work and still the text in the last line each word gets separated out.
View 7 Replies View RelatedWhy does no node appear on Left justified text, yet it appears on right and center justified text?
View 8 Replies View RelatedI have a couple of different files that I'm working on that I want a particular text box left-justified. I will get it left-justified and save the file, but the next time the file is opened the text is centered.
View 2 Replies View RelatedWhy can't I adjust the scale of my text by clicking and dragging the corner boxes? Why I have the text selected, all it does it let me highlight it to change font, size, etc, OR all I can do is move it throughout the artboard. Why can I click and drag the corner box to adjust?
View 7 Replies View RelatedIs there a way to insert a Ai graphic into msWord and the graphic text still be searchable in msWord? I would like the text in my Ai graphic to be searchable once the graphic is inserted in msWord. I have tried different Ai exports, but all come into msWord as pictures. Is there a way to keep the Text Layer in my Ai file searchable in msWord.
View 3 Replies View RelatedThe problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedIn IV 2011 can text be word wrapped in the defined text area.
View 2 Replies View RelatedI'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
How do I export all the text from a PS file to a text file like word?
View 1 Replies View RelatedI have created my Animation:
The stage size you see above is H: 400px, W: 550px.
I would like for the stage to be smaller, say H:50px./W:400px
Ok so if I change the size of the stage the animation text will not show, so I need to adjust the position of the text in order for the animation text to be visible, but in doing that, I am disrupting the timeline and the animation goes all funny, is there another way of doing this without disrputing the timeline?
How to export the .dwg file to Microsoft WORD as a base/background for further word processing on top? Is there any direct way to convert the file that can use in WORD?
View 1 Replies View RelatedI am trying to do something but it doesnt seem to work.
I have made a background paper in Photoshop. I want to copy a text from a word document and paste it into the paper in PS.
I have tried several things, but nothing works. Then I tried to make the paper a png, and insert it into word to copy in the text there instead, and I couldnt get that to work either.
I want to place a word into a square box and it should be in the centre of the box. How can I center it? I want equal spaces in between the word and the box for all four sides.
View 11 Replies View Relatedit's possible to copy and paste form Word and keep the formatting. I've tired using the text tool but the formatting is lost and I've tried direct pasting but it results in a huge size. Resizing the result leaves the print blurry.
I'm trying to add formatted text to an image size of 490 x 680.
im creating a photo strip and want to add text at the bottom after the last picture, how do i add text or insert word art?
View 2 Replies View RelatedI create a file in .ai (small logo for document headers, mostly text), save type to outlines, save an .eps version and import into MS Office Word, save as a PDF and the image comes out with jagged edges. PNG comes out blurry and faded in PDF (it's fine in Word). So I need to make my image available for a Word header for a document that will be saved as a PDF.
View 5 Replies View RelatedOn one PC (CS6, MS office 2007) I can select a line, press ctrl+c, flip to ms word, press ctrl+v and the line shows up. Then the line looks like it was created in word. It is also possible to edit the line in word now.
On another PC (Adobe CC, MS offise 2007 if I do it the same way the following text shows up in word:
<!-- Generator: Adobe Illustrator 17.1.0, SVG Export Plug-In -->
<svg version="1.1" baseProfile="basic"
xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:a="http://ns.adobe.com/AdobeSVGViewerExtensions/3.0/"
x="0px" y="0px" width="143.434px" height="1px" viewBox="0 0 143.434 1" enable-background="new 0 0 143.434 1"
xml:space="preserve">
<defs>
</defs>
<line fill="none" stroke="#000000" stroke-miterlimit="10" x1="0" y1="0.5" x2="143.434" y2="0.5"/>
</svg>
I don't want to use eps and emf because of problem with the quality and the colors (for bigger illustrations...) and I don't want to use png.
How can I copy text from a word document into video studio pro x4 to save me having to type it all again ?
View 3 Replies View RelatedI've been importing Microsoft Word text just using the clipboard. That is, I'll open Microsoft Word, open my document, select all, copy, and then go to InDesign and paste. InDesign gives me a text block with my text and I just re-size the columns. The text comes in all weird and I have to stylize it, of course. Sometimes I get some junk like nonbreaking characters and other hidden characters which screw me up until I figure out what's going on. My question is: what's the best way to import Microsoft Word text that will introduce the fewest errors?
View 4 Replies View RelatedI need to make a pdf to upload my book to Createspace. I've read that I can format the book in Word 2010 using one of their templates.
I've also read that it won't handle photos well.
So I'm wondering if it's possible to import formatted text from Word into Xara Designer Pro 6, then add photos, then export a pdf file.
I tried importing one formatted page (I'm doing 6X9 inches) into a 6x9 page in Xara, but it pastes the whole thing as a lump that is the wrong size, way too big, and I would have to try to shrink it...
Is there a way to do this simply, that would be accurate for every page of a book?