AutoCAD Inventor :: Can Text Be Word Wrapped In Defined Text Area
Apr 14, 2012In IV 2011 can text be word wrapped in the defined text area.
View 2 Replies
ADVERTISEMENT
Illustrator :: Placing Word Text In A Predefined Text Area Box In CC
Jul 11, 2013I'm using an iMac and Illustrator CC. I created a text area box. I want to place text from an outside Word document into the area box. When I go to File>Place and locate the text file, I click on Place. When I'm returned to my Illustrator CC document, the original area box is deselected and my cursor is loaded and ready for me to drag out a new area box. Shouldn't the placed text fill the original area box?
View 3 Replies View RelatedAutoCAD 2010 :: Change Text Editor To Word Processor Like Word?
Mar 15, 2013How can you changed the text editor to a word processor like word?
View 1 Replies View RelatedAutoCAD Inventor :: User Defined Text Parameter In IPart
Aug 17, 2011I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1
Windows 7 64 Bit
ATI FirePro V5800
14.0 GB RAM
CorelDRAW X4 :: Get Text Wrapped To A Circle?
Apr 15, 2013how to fit text to path like the example below. I can get text wrapped to a circle, but I am not sure how to get the outside edge to be wider than the inside edge like the example. Using X4.
View 12 Replies View RelatedAutoCAD Inventor :: How To Word Wrap Leader Text
Apr 16, 2012How do you word wrap leader text?
View 6 Replies View RelatedPhotoshop :: Unable To Use Spaces On Beginning Of Second Line In Wrapped Text
Sep 2, 2012My question is simple:
When I have text inside a text box and it wraps at the end of the box, why can't I put spaces on the beginning of second line (the wrapped line)?
InDesign :: Find All Text Wrapped In Commas And Make Them Italic
Feb 17, 2014I know the Find/Change tool is quite powerful within Indesgn but I was wondering if there is a way for it to find all text wraped in “ ” and make them italic
I have two 10,000 word documents filled with quotes and I was thinking an automated process maybe more accurate than be skimming it and doing it manually.
CorelDRAW X3 :: No Prompt For Text Formatting Options While Pasting Text From MS Word?
Sep 25, 2013The problem just came today while i tried to copy/paste text from Ms Word. As I usually do it asks me about formatting options before pasting text but today its not working the way it should. It simply pastes plain text without all formatting I did to my document in Ms Word. I even tried to repair my software but nothing worked.
View 1 Replies View RelatedGIMP :: Copy Editable Text From A Word File Into The Text Editor
Oct 28, 2013I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
Photoshop :: Export All The Text To Text File Like Word?
Sep 27, 2013How do I export all the text from a PS file to a text file like word?
View 1 Replies View RelatedIllustrator :: Text Not Identical To Text In Word Processor
Dec 12, 2013I wrote the sentence "The quick brown fox jumps over a lazy dog" in Times New Roman regular 12 pt. in Illustrator CS2. The file was saved as a pdf at "press quality." I wrote the same sentence with the exact some font in InCopy CS2 and exported it as a pdf at press quality. As shown in a zoomed-in screenshot from the respective pdfs, the text from Illustrator (top example below) is slightly different than the text from InCopy (bottom example below):
Is it just an unavoidable artifact of the way pdfs are rendered? I realize it's a minor gripe, but even slight bugs/features like this would never be tolerated in a professional publishing environment. What am I not understanding about vector images and/or pdfs?
AutoCAD Inventor :: Display Area For Drawing Section In Text Box
Oct 17, 2011How do I calculate the area for a section of an extruded profile and display it in a drawing note? I see how to add a field <AREA> in the text dialog box, but it comes up as N/A in my text box in the drawing. This is also the case for <MASS> and <VOLUME>. How do I get the drawing fields associated with the physical properties of the model?
View 2 Replies View RelatedPhotoshop :: Text Edit Area Appears As Inactive / Text Box Invisible
Apr 29, 2012I'm having this strange issue with the Photoshop type tool in Photoshop CS5. It might be, although I'm not sure, a bug. The tool itself is working and lets me add text and edit. But the box that shows up when editing text (and the blinking line that shows where I am in the text) - has gone invisible. I am having this issue in only one document. - I tested the type tool on other documents, and everything was normal. I've looked up shotcuts and hotkeys to check if I've tapped a key or something, but it doesn't appear to be so.
Now about the document; it does have quite the amount of text layers, and a lot of text in them. I've tried resetting the type tool, and I've restarted the program.
When I restart the program, the tool works as it's supposed to - but after editing or adding a new text layer, the editing area is gone again! Is this a bug, or have I touched keys that do odd things?
Xara :: Convert Text Line To Text Area
Jul 15, 2011(Using XDP7)
I endlessly find that I have text line objects which I later wish had been proper text areas (because I want to control the size of their bounding box, for example).
Is there any sensible way to convert a text line object into a text area object - it's a bore to do it by creating a new text object and then cutting and pasting the text, and it is seemingly a trivial thing for the software to do automatically.
Alternatively, is there an option (perhaps a hidden one) to have all text objects created as areas rather than lines?
Xara :: Change Alignment Of Text Within Text Area
Nov 26, 2011Is it possible to change the alignment of text within a text area?
By default the text is located top left. Horizontal justification can make this top center or top right, but how about bottom left / center / right or even middle left / center / right?
AutoCad :: Link Text To A Word Document
May 16, 2012Im trying to link mtext in an acad drawing to a word document. For example, when I write a legal description based on a drawing, in word, I want the text that I am referencing in the drawing to be linked. In other words, if I change the text in the drawing, it will automatically change the text in the word doc.
View 3 Replies View RelatedAutoCad :: Remove All Text After Certain Word In One Step
Mar 17, 2013i have textas these
HCR (R) L=6.40 S=0.638
HCl (R) L=6.50 S=0.64
HCR (R) L=6.50 S=0.7
AND ALOT OF THEM IN SAME DRAWINGS WHAT I NEED. I WANT TO REMOVE ALL TEXT AFTER WORDES S=******* IN ONE STEP
So I want it to become as this:
HCR (R) L=6.40
HCl (R) L=6.50
HCR (R) L=6.50
AutoCAD Visual LISP / AutoLISP :: Find And Replace Pre-defined Text / MText Value
Feb 10, 2011Is there a lisp or script program that will find and replace pre-defined text/mtext value of eg " issued for tender " for "issued for construction" without having to select anything.
View 9 Replies View RelatedAutoCAD LT :: Text Style Changed When Copied From Word
Dec 13, 2013I'm using Autocad 2013 and have problems when I want to copy some text from Word file. I'm doing that because translating text, which is translated already in Word. I.e., I have a text written in English in Autocad and now I have to select it all, and paste text copied from Word. It changes color (now it's "by Block"), but I change it back to "by Layer; and changes it's style even if in Word it is the same style as in Autocad (it is Arial in Word and in Autocad, but when I paste copied text it is in Times New Roman.
Is there anything to set up not to change this text, because I have a lot of copy/pasteing to do and would save me a lot of time?
AutoCad :: Insert MS Word Text Without Losing Formatting?
Dec 7, 2011I was telling an engineer the other day that I could probably insert his general notes from MS Word into AutoCAD and create nice clean pdf files of the CD sheets that he could email to clients. On second inspection I could tell that, yes I could copy, paste it in, but fixing all the formatting would be a nightmare. Is there any way to retain the formatting such as numbering, tabs etc. when bringing it in to AutoCAD? The idea is to have it be an editable document, so I don't want to just bring it in as a OLE object, pdf or scan.
View 7 Replies View RelatedAutoCAD Dynamic Blocks :: Insert And Change User Defined Parameters From Excel-text File
Oct 6, 2012But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
AutoCad :: Converting Text (Bill Of Materials) To Microsoft Word Document
Dec 6, 2012Is there a fast, acurate way to convert a Bill Of Materials done in autocad text (I could convert it to mtext if I have to) onto a word document?
I am able to do it line by line with ddedit /copy but what a hassel.
Illustrator :: Text From Word To CS4?
Apr 11, 2013Everytime I copy text in Word and paste it in Illustrator CS4 to edit, Illustrator considerably slows down.
View 2 Replies View RelatedAutoCAD 2013 :: No Word Wrap For Text Screen When Command Line Is Docked
Apr 30, 2012if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
Photoshop :: Copy MS Word Text To PSD?
Sep 15, 2011I am trying to do something but it doesnt seem to work.
I have made a background paper in Photoshop. I want to copy a text from a word document and paste it into the paper in PS.
I have tried several things, but nothing works. Then I tried to make the paper a png, and insert it into word to copy in the text there instead, and I couldnt get that to work either.
CorelDRAW X4 :: How To Center A Word (text) In A Box
Oct 23, 2010I want to place a word into a square box and it should be in the centre of the box. How can I center it? I want equal spaces in between the word and the box for all four sides.
View 11 Replies View RelatedPaint.NET :: Importing Text From Word
Aug 6, 2013it's possible to copy and paste form Word and keep the formatting. I've tired using the text tool but the formatting is lost and I've tried direct pasting but it results in a huge size. Resizing the result leaves the print blurry.
I'm trying to add formatted text to an image size of 490 x 680.
Lightroom :: How To Add Text Or Insert Word Art
Jun 15, 2012im creating a photo strip and want to add text at the bottom after the last picture, how do i add text or insert word art?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Measure Area Of A Region - Defined On TIN Surface
Dec 6, 2013I’d like to ask how I can measure the area of a region, defined on a TIN surface. ( i.e. the area of the bounded topographic terrain )
View 8 Replies View RelatedVideoStudio :: Copy Text From Word Document?
May 23, 2011How can I copy text from a word document into video studio pro x4 to save me having to type it all again ?
View 3 Replies View Related