if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
I have a bunch of students who load tool bars and dock their command line, but as soon as they close AutoCAD and reopen, the command line is floating again and the tool bars are missing. Saving and importing a profile does not seem to work!
View 1 Replies View RelatedMy command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies View RelatedMy command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies View RelatedHow do you word wrap leader text?
View 6 Replies View RelatedI have a number of textures of marble, stone, rock... much of which I use in construction projects within Second Life where I am a Builder.
I have a small project in the works to produce a stone structure; that has some text engraved into the stone. I have the text typed up in MS Word. But when I copy/paste that into Paint.net; there is no left/right/center alignment; and the text has no 'word wrap'... it just pastes it all as one single reeealllllly long single spaced line... like there is no bounding box to contain it. Further more, I am not sure how I could make it appear as though it were 'engraved' ...
Now I do know how to make/add Layers... I use Paint.net often to manipulate many of my existing Second Life textures that I buy from within Second Life, and upload onto my computer to 'tweak' them. Sometimes I'll add an alpha transparency layer of Spanish Moss to a Stone Wall, for example, then re-upload that back into SL.. and I now have a building with stone walls, and spanish moss hanging over the walls to give it more unique look.
I know I can create a "layer" of Text, that can then be added over a stone or marble texture image...But I can't figure out how to get that text to wrap or center, or appear engraved
How would I acquire these features, is there a plugin that does all this for text?
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
When I click on an object to retrieve it's extended data, the data keeps writing to the right, it does not return to the next line, when the text approches the end of the screen.
View 2 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I had the properties window docked on the right side of my screen before I reinstalled ACAD LT 2009. Now I can't figure out how to get it back.
View 9 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
Can you set up word wrap in a table's column headers?
View 4 Replies View RelatedAi CS6.
If I draw a rectangle and use Extrude&Bevel to create a 3D "box" shape, how do I wrap a single line of text around three of the sides? I've created a Symbol from the text, and it shows up in the "Map Art" dialog window's "Symbols" selection, but only one face of the 3D box is shown at a time. I was hoping to see a flattened box shape showing all six faces so I could accurately place the line of text. Similar to what you see when you revolve a path to get a 3D object.
It's even worse if I apply a bevelled edge to the extrusion -- then there are 40 separate "faces" to deal with.
When entering a command with autocomplete on and the List option on, the list dropdown only displays two or three of the possible choices, because the list box opens below the command line, which is at the bottom of the screen. Unless I minimize acad and adjust the window to only fill part of the screen, I can't see the list. This is a shame, because it is a cool feature. Having a dialog box display off the screen? how to get this to either display on the screen? Here is a screen shot of how it looks at window max and window minimumized.
View 9 Replies View RelatedBasically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
How can you changed the text editor to a word processor like word?
View 1 Replies View RelatedIs there a "Word Wrap" option in the title dialog? If I paste a lot of text, I have to insert manual line breaks. Is there a way around this?
View 8 Replies View RelatedI've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedOn "TEXTFILL", Help says:
Controls the filling of TrueType fonts while plotting and rendering.
0
Displays text as outlines
1
Displays text as filled images
Q1) It doesn't affect the text visible on monitor? Does it? I was expecting to see the result in Print Preview or Print to PDF before plotting to paper but I couldn't. Does it mean there is something wrong or still it will be OK if I plot to paper?
Q2) It is only for TrueType fonts so it doesn't affect other fonts (what other fonts could be? because all fonts in my ACAD are TT)
I turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
As an Autocad user since Rel. 2.1. My favorite is when attempts to draw a line using feet and inch input while units are set to decimal. How "Point or option keyword required" is supposed to guide using the correct units setting? With DYN Input on, the red outline offers even less information. Are the prompts user editable?
View 4 Replies View RelatedIs there a way to set a profile by the command line instead of through OPTIONS? I'm contract and do not have admin rights on the PC so I can't change the startup target to my profile.
I can write a script to make the changes I need at every startup but can't find the profile setting command/variable.
I want record a macro to update a title block. We've revised the formatting of our title block. The block name is the same, only some appearances change.
I noticed in the insert command, "You can replace an existing block definition with an external file by entering block name=file name." This would be great. I could just type in the block name and the file name and AutoCAD would replace the current with the new version in the file. Then do an ATTSYNC and we're done.
*EXCEPT*
The path and the block name both have spaces in them. Is there any way to make AutoCAD stop taking the space as a return?
I like my command line to be near the left hand corner and not "docked" (meaning taking up the entire bottom of the screen) like this:But each time I plot, and open AutoCAD 2013, It snaps back to the middle like this:
I've tried saving my workspace (I'm very familiar with customizing and how that all works) but it just always snaps to the middle.I really like the floating command line and found that if I have it just to the right of my UCS icon at the bottom left of my screen, it's out of my way, but gives me the lines of info I want.
How to make it stay near the corner and not snap back to the middle?
Is it possible to clear the command line history? Im running a series of commands that output data to the command line, from there I'm copying and pasting off the command line to notepad. Is possible to clear the command line so that I can run these commands again and not get confused by the previous sequence of data?
View 7 Replies View RelatedI've update AutoCAD 2012 to AutoCAD 2013 and I have a problem when I type "L" or "C" to draw a line or a circle, the command line says "Unknown command "L". Press F1 for help". It's the same thing if I fully type the command "line" or "Circle". But some other commands works normally.
Working on:
Windows 7
Intel Core i7 2.93Ghz
8 Go RAM
NVIDIA Quadro FX 3800
Is there a way to display more "lines" at the command line?
View 8 Replies View RelatedWhen programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies View RelatedFor as long as I have been using Autocad (10 yrs), if I typed an autolisp expression (in brackets) on the command line any output from the espression was echoed to the command line.
E.g. I type (+ 2 2) on the command line and Autocad returns with 4.
I installed SP 1 for Autocad 2013 and this bevaviour ceased, i.e. 4 did not appear in the command window although it did appear on the text screen.
I then un-installed SP1 and "normal" behavior resumed.
When SP 1.1 came out I installed that and again find that I do not get the returns from autolisp functions eched to the command window, only to the text screen.
I have now uninstalled SP 1.1, which I sort of hate to do, because I use those one line Autolisp functions quite alot.
Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedWe (the entire office) haven't had this issue in 2012, but in all of our 2013 installations, this is occurring.
In 2012, several rows are displayed in the command prompt, say for example you do a distance command, there are two rows of text showing the information the user might want to see. It displays the first row of, distance, the angle in XY plane and the angle from XY plane. The second row displays the delta X, delta Y and delta Z.
In 2013, it only displays delta X, delta Y and delta Z. The user have to hit "F2" to invoke the "AutoCAD Text Window" to view the first line of text.
I hope there is a variable setting for this, and not an oversight by Autodesk.