I've update AutoCAD 2012 to AutoCAD 2013 and I have a problem when I type "L" or "C" to draw a line or a circle, the command line says "Unknown command "L". Press F1 for help". It's the same thing if I fully type the command "line" or "Circle". But some other commands works normally.
Working on:
Windows 7
Intel Core i7 2.93Ghz
8 Go RAM
NVIDIA Quadro FX 3800
Why AutoCAD 2013 turn off dynamic input when we use the insert command. It happens only when using dynamic blocks.
View 5 Replies View RelatedI want record a macro to update a title block. We've revised the formatting of our title block. The block name is the same, only some appearances change.
I noticed in the insert command, "You can replace an existing block definition with an external file by entering block name=file name." This would be great. I could just type in the block name and the file name and AutoCAD would replace the current with the new version in the file. Then do an ATTSYNC and we're done.
*EXCEPT*
The path and the block name both have spaces in them. Is there any way to make AutoCAD stop taking the space as a return?
I have recently had my 2007 upgraded to 2010 and I'm finding it annoying that everytime I use the distance command the DYN button turns on and I get too much information on the screen as well as a little box I have to exit everytime. How to keep the DYN button switched off? I'm just happy to have the distance information in the command bar at the bottom.
View 5 Replies View RelatedI am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI have a problem with Dynamic Input suddenly displaying dimensions in the middle of a line rather than on screen as I work. What I mean is that if I draw a line the length of the line is displayed at the center of the line. When I zoom in to one end of this line the display of the length of the line is no longer displayed on screen but remains at the center of the line. I use AutoCAD 2008.
View 5 Replies View RelatedI've been working on a project for a bit and so far everything had been working correctly. But recently I must have mistakenly changed a setting I don't know about because now I am experiencing an issue.
When I am trying to enter a unit at the pointer, for example, the length of a line I am creating, if I use a space, AutoCAD seems to be treating it as ENTER and thus I can not specify my unit correctly.
In other words, if I want my line to be 3'-9 5/8" in length, I can type in 3'-9, but as soon as I hit the space bar in order to type in the 5/8" AutoCAD automatically finishes my line at a length of 3'-9".
I'm trying to create a pline in a dynamic block where the length is determined by two values I would input into properties or as attributes.
The first value 'A' will be a ground surface elevation
The second value 'B' will be a ground water elevation
I would like to the pline to have a length of A minus B.
I would then also like to have mtext (or any other method of display text) to display the values of A and B.
For example, if I have a ground surface of 102 and a ground water of 91, my line length will be 11, and I can display a label of '102' at the top of the line and '91' at the bottom of the line.
I've created dynamic blocks before, but none that have used an expression of two values or having to display inputted values. I'm not really sure where to start with this, or if it's even possible.
I am having this problem for the first time with my most recent install of 2014 on a Windows 8 computer. When copying a line or any other object along another line as a base, when I type the distance that I want to copy the object, it deselcts the autosnap vector that I had specified. For example, now when I copy an object along a line at various intervals, I have to move my mouse after entering the distance each time to enable the object snap to reselect the direction I want to copy it (along a line that should stay selected through the object snap: nearest).
Is there some object snap or dynamic input setting that I need to change?
Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
I've been using AutoCAD 2013 Korean in Windows XP and Windows 7(32/64bit).
I have a question the command prompt.
The line have the name of layer : 0 (default layer)
I create another layer. It's unicode
And I will change name of layer 0 to 도면층1.
But I can not input unicode character to command prompt.
But It was changed from property dialog.
Can I input unicode character from command prompt?.
Previous version(AutoCAD 2008,2009,2010,2012) CAD worked well.
I used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
I have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedI've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
As an Autocad user since Rel. 2.1. My favorite is when attempts to draw a line using feet and inch input while units are set to decimal. How "Point or option keyword required" is supposed to guide using the correct units setting? With DYN Input on, the red outline offers even less information. Are the prompts user editable?
View 4 Replies View RelatedIs there a way to set a profile by the command line instead of through OPTIONS? I'm contract and do not have admin rights on the PC so I can't change the startup target to my profile.
I can write a script to make the changes I need at every startup but can't find the profile setting command/variable.
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies View RelatedI like my command line to be near the left hand corner and not "docked" (meaning taking up the entire bottom of the screen) like this:But each time I plot, and open AutoCAD 2013, It snaps back to the middle like this:
I've tried saving my workspace (I'm very familiar with customizing and how that all works) but it just always snaps to the middle.I really like the floating command line and found that if I have it just to the right of my UCS icon at the bottom left of my screen, it's out of my way, but gives me the lines of info I want.
How to make it stay near the corner and not snap back to the middle?
Is it possible to clear the command line history? Im running a series of commands that output data to the command line, from there I'm copying and pasting off the command line to notepad. Is possible to clear the command line so that I can run these commands again and not get confused by the previous sequence of data?
View 7 Replies View RelatedIs there a way to display more "lines" at the command line?
View 8 Replies View RelatedWhen programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies View RelatedMy command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies View RelatedFor as long as I have been using Autocad (10 yrs), if I typed an autolisp expression (in brackets) on the command line any output from the espression was echoed to the command line.
E.g. I type (+ 2 2) on the command line and Autocad returns with 4.
I installed SP 1 for Autocad 2013 and this bevaviour ceased, i.e. 4 did not appear in the command window although it did appear on the text screen.
I then un-installed SP1 and "normal" behavior resumed.
When SP 1.1 came out I installed that and again find that I do not get the returns from autolisp functions eched to the command window, only to the text screen.
I have now uninstalled SP 1.1, which I sort of hate to do, because I use those one line Autolisp functions quite alot.
Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedWe (the entire office) haven't had this issue in 2012, but in all of our 2013 installations, this is occurring.
In 2012, several rows are displayed in the command prompt, say for example you do a distance command, there are two rows of text showing the information the user might want to see. It displays the first row of, distance, the angle in XY plane and the angle from XY plane. The second row displays the delta X, delta Y and delta Z.
In 2013, it only displays delta X, delta Y and delta Z. The user have to hit "F2" to invoke the "AutoCAD Text Window" to view the first line of text.
I hope there is a variable setting for this, and not an oversight by Autodesk.
I've just installed 2013 and Service Pack 1.1 and downloaded (and installed) off line Help.All the Tool Palettes except my custom ones, are blank.
I can't find the command line, even after typing "commandline".And the search feature doesn't do anything.And I can't find where to send a helpdesk plea for support.
Is there a way to change the cursor color in the command line in AutoCAD 2013?
When I change the background (active command) to black, the cursor blends into it and not visible. Can’t see where is my current position when editing coordinates. The command background was black and text white for the last 10 years for 20 drafters; we would like to keep it this way
Why is it that when I click in the command line history field (when docked) and roll the mouse wheel I can't scroll it up or down? There is no visible scroll bar until the cursor is moved to the other side of the window (a long way on the 30" display), and grabbing this will scroll the command history, yet the wheel wont work.
If the command line is undocked and the disclosure triangle is clicked to display the history, the scroll wheel DOES scroll the list.
AutoCAD 2014 Win 7 x64