I have recently had my 2007 upgraded to 2010 and I'm finding it annoying that everytime I use the distance command the DYN button turns on and I get too much information on the screen as well as a little box I have to exit everytime. How to keep the DYN button switched off? I'm just happy to have the distance information in the command bar at the bottom.
View 5 RepliesWhere the hell did my Dynamic Input Tooltip go? How do I turn it back on?
View 1 Replies View RelatedWhy AutoCAD 2013 turn off dynamic input when we use the insert command. It happens only when using dynamic blocks.
View 5 Replies View Related Did 2013 change the way Direct Distance Entry is handled?
Say I want to start a line a distance of 3 from another line using Otrack and a running endpoint snap. Before, I could just hover over the existing line's endpoint, move the cursor in the right direction, and enter 3 on the keyboard. Now in 2013, I need to have Dynamic Input (F12) turned on to get this behavior. 2012 was not this way.
I can't seem to turn on the dynamic input. I followed the advice to go through Tools-Application Options - Sketch Tab, but then it references a 'Settings' box that doesn't seem to exist (see the attached screen shot). Is there some other option that needs to be turned on?
View 1 Replies View RelatedI've update AutoCAD 2012 to AutoCAD 2013 and I have a problem when I type "L" or "C" to draw a line or a circle, the command line says "Unknown command "L". Press F1 for help". It's the same thing if I fully type the command "line" or "Circle". But some other commands works normally.
Working on:
Windows 7
Intel Core i7 2.93Ghz
8 Go RAM
NVIDIA Quadro FX 3800
what can I do to avoid the annoying mouse cursor "delay" or "jumps" when I move it inside my project ?
I have one surface and 3 aligments....
I have tried turn off tooltips on general options but... yes I dont see tooltips but the mouse seems to investigate the objects below the cursor....
In adittion,. is there a variable to control this ?
Civil 3D (2013)
I was wondering if there is a way for me to setup Autocad so that instead of putting in S 88d20'12" W I could put in something like S88.20.12W so that I don't have to mess with apostrophes or "d." Also, can i do something similar with distance settings? Where instead of saying 5'-6 1/2" I can say 5.6.1/2. I know I could convert the measurements into decimals, but that would waste the time I would be saving with a faster input method.
View 1 Replies View RelatedI would like to eliminate a mouse click in my program. I use getstring to allow the user to either enter in an integer or a distance used for labeling in a drawing, but I could eliminate the need for the user to then click an option that completes the label if I only knew how to determine if the entry is an integer (such as 5 or 15) or a distance (such as 24" or 36").
View 9 Replies View RelatedI have just been given an new PC and trying to configure as quickly as possible.
I'm using Autocad 2012 and I cannot get rid of the shortcut menu when using the
distance command. F12 works initlailly but only for first part of command.
Shortcut menu always appears.
No matter whether Dynamic Input is on or off, input needs to be @X,Y in order to draw with relative coordinates.
Many students have installed recently AutoCAD LT 2012 Educational version and this problem appears only with one of them. Dyn Input Settings seems to be equal on all computers.
I'm writing because I need to disable the dynamic input in AutoCAD.
It's irritating to me, because I'm more used to a much older version of AutoCAD.
Upon searching through the internet I found a thread here that says that I have to set DYNMODE to "0" to turn off the dynamic input. Alas, I have no clue as to at which subfolder of the registry this variable should be.
I want to be able to see angles in Dynamic Input with the base line set where I need it to be.
In the red is where AC puts the baseline in the DYN command.
Is there a way for me to "tilt" the baseline so i can use it in ANY angle, like in the blue?
* I am referring to the baseline as where 0 degrees begins*
When I create a line using dynamic input, I key in the length, TAB, and the angle. Is there a toggle setting somewhere that will allow me to enter angles greater than 180°? Drawing Units are set to Base angle north (270°) angles in D-M-S measured clockwise, yet dynamic input angles are measured from east (0°) both clockwise and counterclockwise. I.E. an input of 90° gives me either north or south, depending on where the cursor is located.
Ideally, I would like to be able to enter either 225° or -135° and have the line head off to the southwest. So far, I'm stymied and have to resort to command line entry. How to make dynamic input do what I want it to?
I've been working on a project for a bit and so far everything had been working correctly. But recently I must have mistakenly changed a setting I don't know about because now I am experiencing an issue.
When I am trying to enter a unit at the pointer, for example, the length of a line I am creating, if I use a space, AutoCAD seems to be treating it as ENTER and thus I can not specify my unit correctly.
In other words, if I want my line to be 3'-9 5/8" in length, I can type in 3'-9, but as soon as I hit the space bar in order to type in the 5/8" AutoCAD automatically finishes my line at a length of 3'-9".
how to use Dynamic Input in and keeping it switched on.
I just wondered which version of CAD it first came from and brief history of how it changed...?
I cannot get Dynamic Input to work correctly on my AutoCAD 2013 installation. Polar Format is always the default no matter what the variable DYNPIFORMAT is set to. Neither using 0 or 1 as the setting will enable Cartesian Format to be the default for the second or next point. Changing the settings in the Pointer Input Settings dialogue box to Cartesian Format also has no effect. 2nd point always is entered as Polar Format. The over-ride for cartesian (,) does work though. I simply want the default to always be cartesian .
View 6 Replies View Relatedwhen i used to use the polyline edit (double click a polyline) the options came up on the tooltip but now i just get them in the command line
is it me or have i unticked a box somewhere?
Is there a way to set the distance for when you use the break command or will I need to create a LISP that will do this?
View 3 Replies View RelatedI am writing a API in .NET. I can send commands to the AutoCAd command line using the sendCommand feature but can i access the result returned too? I am not able to find the right class/function the redirect the command result back to my API
View 3 Replies View RelatedI have a linear stretch D1:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: unlimited
I also have a linear stretch D2:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: is it possible to set the maximum distance to equal D1-2.5??
Both linear stretch D1 and D2 can be stretched independently. So D1 may be stretched to 100, and D2 may be stretched to 50, but what I am trying to do is ensure that D2 will never stretch beyond the distance of D1.
Am I missing something or is there no way to control array action spacing with formulas or user parameters?
View 3 Replies View RelatedI changed something about how AutoCAD displays and enters data for block grips.
It used to display the current value for the parameter when I dragged a grip. For instance grabbing a grip for a linear parameter would give me the current length of the parameter and if I typed 24" into the dynamic input it would change the parameter's value to 24"
Now the grips behave as if they were ordinary entities. For example if I grabbed a linear grip that had a value of 12" the displayed value is 0. As soon as I move it displays the value of the difference. Stretching it to 16" will display 4" when it used to display 16". If I were to type in 16" however the parameter shoots to 28" (12" + 16")!See, it's giving me the polar distance I dragged the grip and not 2'-2" (the value of the linear parameter) like it should.
AutoCAD 2010
AutoCAD LT 2013
One minute it was working, and then suddenly I can not use the "down arrow" to access the additional dynamic input options. It must be a profile setting, because it works in all my other profiles.
How to turn it back on?
Dynamic Input options.JPG
I can't find a solution to make it pop-up. It works when I want to stretch the line clicking a grip though.
I wonder if my AutoCAD got corrupted or there's a setting for it. I lean to believe it's the former.
i have been using the DI command to get line lengths (of road widths, that sort of thing), and in the command line, it just gives the X, Y and Z distances, and not the actual length of the line.
how to change the displayed information so that the length of the line drawn with DI shows in the command line?
Also is there an option to choose what is displayed in the command line with DI command?
Is it possible to input an arithmetic expression (like 0.7*24) when a command asks for input value? For example during offset command. I thought it is possible to use calculator command inside a command but there was no success.
View 9 Replies View RelatedI have a dyn block of a door (a 1:1 door designed to be laser cut from sheetmetal and folded, hence the strange shape), I want the number of hinge holes (3) to change to (2) when stretching below a certain length and vice versa. I have a visibility state that allows me to change the number/size of hinges/handles through the drop down, but I want to be able to eg. Stretch the door past a certain point (1000mm) and any distance after that will have a third hinge inserted automatically, and reduce back down to (2) when stretched below 1000mm.
I already have it set to stay centered, but trying to make it insert/remove over a set distance is difficult!
Attached.
I have a dynamic block with stretch property.
It changes length after copy/paste.
A sample drawing is attached here.
For example, whenever you use the distance command it automatically turns the dynamic input back on. We have turned off the settings under drafting settings - dynamic input. I have also turned off the tooltips under options - display tab. Is there a patch or update?
View 3 Replies View RelatedI can't find a solution to make it pop-up. It works when I want to stretch the line clicking a grip though.
I wonder if my AutoCAD got corrupted or there's a setting for it. I lean to believe it's the former.