AutoCAD Dynamic Blocks :: Change Distance After Copy And Paste?
Jun 10, 2013I have a dynamic block with stretch property.
It changes length after copy/paste.
A sample drawing is attached here.
ADVERTISEMENT
AutoCad :: Blocks Change During Copy And Paste?
Feb 24, 2012I have a drawing in house that has issues. When using edit/ copy and edit / paste on a block within the drawing, the block changes to another block when pasted. On a side note, it comes in at the rotation of the original object which was copied. I believe that I am using V.2000
View 8 Replies View RelatedAutoCAD VB :: Copy And Paste Created Selection Set To Point X Distance Away?
Aug 13, 2012I was wable to write some code that makes some already drawn objects on autocad into a selection set. What I need to do next is copy the selected objects and move them over like a distance of 50 to the right.
View 7 Replies View RelatedAutoCAD Dynamic Blocks :: Linear Stretch Max Distance
Sep 28, 2013I have a linear stretch D1:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: unlimited
I also have a linear stretch D2:
Distance Type: Increment
Dist Increment: 1
Dist Minimum: 1
Dist Maximum: is it possible to set the maximum distance to equal D1-2.5??
Both linear stretch D1 and D2 can be stretched independently. So D1 may be stretched to 100, and D2 may be stretched to 50, but what I am trying to do is ensure that D2 will never stretch beyond the distance of D1.
AutoCAD Dynamic Blocks :: Automatically Inserting Hinges Over Distance
Jul 17, 2011I have a dyn block of a door (a 1:1 door designed to be laser cut from sheetmetal and folded, hence the strange shape), I want the number of hinge holes (3) to change to (2) when stretching below a certain length and vice versa. I have a visibility state that allows me to change the number/size of hinges/handles through the drop down, but I want to be able to eg. Stretch the door past a certain point (1000mm) and any distance after that will have a third hinge inserted automatically, and reduce back down to (2) when stretched below 1000mm.
I already have it set to stay centered, but trying to make it insert/remove over a set distance is difficult!
Attached.
AutoCAD Dynamic Blocks :: Linking Stretch Action Distance To Attribute Value
Dec 3, 2012I have a block which is a simple rectangle with a height and width attributes that when I edit, change or update the height and width attributes I want the rectangles height and width to change as well.
I know I can go backwards using fields and the attributes would show the stretched length and width but is it possible to go the other way?
AutoCAD Dynamic Blocks :: Variable To Change Dynamic Grip Parameter Size And Color
Oct 11, 2012What is the variable to change the dynamic grip parameter size and color.
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Dynamic Door / Specific Parameters To Change Its Size And Orientation
Dec 13, 2013I'm working on a dynamic door, that has specific parameters to change its size and orientation. Everything works pretty good, only the arc for the door won't react the way I want it.
View 8 Replies View RelatedAutoCad 2D :: Copy Blocks From 1 Drawing To Another Using Paste To Original Coordinates
Jan 31, 2013In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
View 8 Replies View RelatedAutoCAD Dynamic Blocks :: Block With Field Doesn't Work If Paste From Tool Pallet
Sep 27, 2012I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Copy Metric And Convert It To Become Imperial?
Jan 12, 2013Why is there no dynamic block for the Imperial Hex Nut in the tool palettes?
Can I copy the Metric and convert it to become Imperial?
Where do I change Metric to Imperial in this dynamic block?
AutoCAD Dynamic Blocks :: DB Change Size After Editing
Apr 18, 2012I received some outsourcing drawings which include this block. All time if I try do some edits in block editor size of this block changed. Also if you reset this block, size changed. What is wrong with this block?
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Block Disappear When Change X Or Y Value
Nov 4, 2013i'm trying to work with a block by changing the x or y value in properties -- but when i do, the block disappears. i don't work with blocks very often, but someone i'm working with sent me his blocks and i can change the height or width very easily in the properties window -- and his blocks don't disappear!
why are mine disappearing?
AutoCAD Dynamic Blocks :: Annotative Parameters Inside Dynamic Blocks
May 5, 2010I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.
In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.
The attached file shows a simple example.
AutoCAD Dynamic Blocks :: Change Dimension By Stretch Searching
Jul 28, 2011I try create simple block where I change dimensions of polylines. Everything work with stretch partameter until I try use search parameter for change dimension.
View 4 Replies View RelatedAutoCAD Dynamic Blocks :: Multiple Components That Change Independently
Mar 22, 2013I'am trying to create a block that has 3 components that can change
1- crane model or base
2- crane boom has different lengths and needs to rotate at pivot point
3- crane jib has different length and offsets from the crane boom
You can do this in one block or do you need to have 3 separate blocks and just piece together?
AutoCAD Dynamic Blocks :: Visibility Change When Copying Form One Drawing To Another?
May 18, 2011Is there a reason why my dynamic blocks are changing back to the defaut visibility when i copy the blocks from one file to another?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Dynamic Blocks Change Visibility State
Nov 1, 2013I have 4 Dynamic Blocks with the same name, but each are on different layout pages. I need to change the visibility state of all 4 to the same value. So far every attempt of mine has failed.
My process at this point is to: build a selectionset of all 4 Dynamic Blocks with the same effective name, convert the selectionset to a list of entity names, then use a foreach to change the visibility states one at a time. Currently, I get "error: bad argument type: lselsetp <Entity name: 7ffff7b6c90>". <Entity name: 7ffff7b6c90> is the entity name of the first block in the list. I'm guessing it's because the block is found on a non-current tab
(defun chgdynprop (e propname newval / obj v vval sal tot i) (setqobj (if(= (type e) 'vla-object) e (vlax-ename->vla-object e))) (if (= (vlax-get-property obj
AutoCAD Dynamic Blocks :: Adding One Action To Dynamic Blocks
Mar 15, 2012I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.
This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g. I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).
I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.
I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.
AutoCAD Dynamic Blocks :: Insertion Point On Dynamic Blocks
Apr 23, 2013I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.
My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?
AutoCAD Dynamic Blocks :: Insert And Change User Defined Parameters From Excel-text File
Oct 6, 2012But I was wondering if it is possible to contol the insertion of dynamic blocks and it user definerable parameters from a excel-text file.
I am surveying a section of pipework and I need to display the brackets that are supporting the pipes. As there are numerous pipes on top of each other I have decided to show the brackets in plan and isometric view.
I think I have made the dynamic block ok and have numerous stretch/move and scale parameters working correctly.
But the only way that I can see of chaging these parameters at the momment is by manually typing them in the properties tool pallete for each individual block.
So I was thinking that if I can store the correct values that I need for each parameter in the dynamic block on our data logger along with the correct E,N,Z insertion point is it possible for this file to change the parameters in the dynamic block for example, If I have the correct insertion point stored and then have 10 parameters stored with that point for simplicity I store as A=5.00,B=8.00,C=0.100 etc and these correspond with the parameters in the dynamic block will this file be able to alter the dynamic block as the values in the excel/Text file are displayed.
AutoCAD Dynamic Blocks :: Stretching Dynamic Blocks
Sep 7, 2012is there a way to make dynamic blocks stretchable similar to a mleader,
the blocks i create are only stretchable by grips, and not by crossing
(i am using linear or point parameter stretches)
AutoCAD Dynamic Blocks :: Grips And Dynamic Blocks
Jun 1, 2006Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.
View 4 Replies View RelatedAutoCAD Dynamic Blocks :: Change Length Of Line Based On Length Of Attribute
Jan 8, 2013Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
AutoCAD Dynamic Blocks :: Link Dynamic Block Custom Rotation Action
Mar 22, 2013So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
AutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block
Jun 13, 2013I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
AutoCAD Dynamic Blocks :: Flipping Dynamic Block With Multiple Items Not Visible
Jul 25, 2012new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Create A Dynamic Block For Glass Panel In Balustrade
Feb 28, 2012I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
AutoCAD Dynamic Blocks :: Insertion Point Of Attribute Changing Within Dynamic Block
Nov 21, 2011I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
AutoCAD Dynamic Blocks :: Pass Attribute Values To Dynamic Block Parameters?
Dec 4, 2013I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: How To Disable The Dialog Box Shown When Open A Dynamic Block
Nov 7, 2011I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...