I've just installed 2013 and Service Pack 1.1 and downloaded (and installed) off line Help.All the Tool Palettes except my custom ones, are blank.
I can't find the command line, even after typing "commandline".And the search feature doesn't do anything.And I can't find where to send a helpdesk plea for support.
This is the problem I have. When I type something, ie a line length or a command, ie purge, whatever it is I type it is not shown in the command line... what am I doing wrong or what setting do I need to change..
View 3 Replies View RelatedIm looking for a way to be able to get the latest .ctb files and tool palettes, weekly auotmaticly,
almost like task schedular in inventor, so when the .ctb of palettes gets updated, the users get it autmaticly,
tried inventor task schedular, by getting the latest folder, but the file types is not supported.
I have just updated from 2012 to 2013, I've transferred all the necessary support file as I always do.I am trying to add a new Pallette to my custom Pallette group. However, when I try to drag blocks into the new Palette AutoCAD won't allow me to do so. I have to drag them first into another existing Palette, then drag them into the new one.
Then I have the problem of the New Palette disappearing when I next open Cad. Even after the New Palette .atc file appears in my support folder and I save my Workspace profile.
I'm using AutoCAD 2014. When we upgraded from 2013 I migrated all of my tool palettes and settings over to 2014 earlier this year. All seemed normal up until Friday when I created a new palette. That part was normal, but when I tried to drag a block from Design Center to that tool palette it wouldn't populate. It seemed like it was going to, it gave me that typical >---< under where the block would show up in the tool palette, but when I tried to release it in the palette, nothing.
Additionally, if I right click on a directory/folder in design center and select "Create Palette of Blocks" (which I have done a million times before), it will create the tab of the directory/folder I have created but does not populated it with the blocks within that directory/folder. Leaving me with a blank Tool Palette.
I have a bunch of students who load tool bars and dock their command line, but as soon as they close AutoCAD and reopen, the command line is floating again and the tool bars are missing. Saving and importing a profile does not seem to work!
View 1 Replies View RelatedAt my previous place of employment I used ACAD 2010 and ACAD 2011 Design Suites. One of the programs had tool palettes and/or design centers that enabled me to build my structures choosing blocks of wall types, windows, casework and doors, trees via a palette all in 3d and 2d form. I was able to change my views all around the 3d model and walk thru it with a camera. I did several homes using this program. I don't know what the difference is but ACAD 2013 does not appear to have it.
View 6 Replies View RelatedI want to share toolpalettes for multi-users in a network.
i create a share-folder with full-write-and-read-status for the cad-admin. then i added the folder into the _toolpalettepath-definition in the acad-options. all other users only have only-read-status for this folder.
this folder will be define in the first position of this list.
in theorie this will work - but now a costumer test this configuration. the problem is, that texts and seperator-lines in the paletten-defintion change the order - like example.
In other postings i read the name *.aws-files - but i did not understand the meaning of this file.
I just made the transition from AutoCAD 2009 to 2014 last week so I am unfamiliar with this version.
1-It's possible to have variables that are attached to the file?
2-It's possible to insert a block of ToolPalettes by "forcing" the layer and size with the variables created.
ex : block outlet created on the layer 0
Drawing A:
variable layer = power
variable size = 1/4
When I insert the block outlet from my Tool palettes it will be on the layer "PPOW" and perform a scale of "48"
Drawing B:
variable layer = LowPower
variable size = 3/8
When I insert the block outlet from my Tool palettes it will be on the layer"LPOW" and perform a scale of "32"
I lost my Tool Palettes Design Group, I still have the same profile the only thing is showing is the menu bar, how to get it back
View 2 Replies View RelatedDue to circumstances beyond my control the directory path that my tool palettes are mapped to needs to be changed.
From: T:Toolpalettesetc...
To: X:Toolpalettesetc...
I have hundreds of blocks in the tool palettes that are looking for their source file on the "T" drive.
My brain says "Find / Replace T: with X: " using Notepad in all of the ATC files.
Is there a better method to tell those blocks to look on the "X" drive?
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
I know there are workarounds, but why doesn't Adesk add better support for shared network resources such as tool palettes (with groups)?
View 3 Replies View RelatedWe have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
We are running a new copy and it IS registered.
I've been searching for a command that could actually cut lines for purpose. For example, if I'm drawing a 2 line crossed, wish I could cut the 2 lines so they are now 4 segments. On a circle, I could actually draw a line that pass trough the circle on cut it off the way I wish. Does such command exists for autoCAD? Very often, I've many lines at the same time that I wish I could cut with a single one. The problem is that I don't wish to trim 'em and extend (losing time and long process). Sure there is also the div cmd, but this isn't what I'm seeking for.
View 7 Replies View RelatedI turned off the command line because I don't use it or need it on my screen. But each time after I do a plot preview the stupid thing automatically turns itself back on.
Is there a way to permanently turn this thing off because apparently hitting the "x" on the toolbar isn't working correctly.
Also, why did they do away with the flyout option on the commandline. At least then I could dock it somewhere and collapse it.
As an Autocad user since Rel. 2.1. My favorite is when attempts to draw a line using feet and inch input while units are set to decimal. How "Point or option keyword required" is supposed to guide using the correct units setting? With DYN Input on, the red outline offers even less information. Are the prompts user editable?
View 4 Replies View RelatedIs there a way to set a profile by the command line instead of through OPTIONS? I'm contract and do not have admin rights on the PC so I can't change the startup target to my profile.
I can write a script to make the changes I need at every startup but can't find the profile setting command/variable.
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies View RelatedI want record a macro to update a title block. We've revised the formatting of our title block. The block name is the same, only some appearances change.
I noticed in the insert command, "You can replace an existing block definition with an external file by entering block name=file name." This would be great. I could just type in the block name and the file name and AutoCAD would replace the current with the new version in the file. Then do an ATTSYNC and we're done.
*EXCEPT*
The path and the block name both have spaces in them. Is there any way to make AutoCAD stop taking the space as a return?
I like my command line to be near the left hand corner and not "docked" (meaning taking up the entire bottom of the screen) like this:But each time I plot, and open AutoCAD 2013, It snaps back to the middle like this:
I've tried saving my workspace (I'm very familiar with customizing and how that all works) but it just always snaps to the middle.I really like the floating command line and found that if I have it just to the right of my UCS icon at the bottom left of my screen, it's out of my way, but gives me the lines of info I want.
How to make it stay near the corner and not snap back to the middle?
Is it possible to clear the command line history? Im running a series of commands that output data to the command line, from there I'm copying and pasting off the command line to notepad. Is possible to clear the command line so that I can run these commands again and not get confused by the previous sequence of data?
View 7 Replies View RelatedI've update AutoCAD 2012 to AutoCAD 2013 and I have a problem when I type "L" or "C" to draw a line or a circle, the command line says "Unknown command "L". Press F1 for help". It's the same thing if I fully type the command "line" or "Circle". But some other commands works normally.
Working on:
Windows 7
Intel Core i7 2.93Ghz
8 Go RAM
NVIDIA Quadro FX 3800
Is there a way to display more "lines" at the command line?
View 8 Replies View RelatedWhen programming in Autolisp, I like to view the values set to my variables so you type an exclamation point followed by the variable name on the command line to have it display the value. My command line will not display the value. I have to hit the F2 key to bring up the text window to view it. how to get the command line to view this information? We have other computers that show it, but mine will not.
View 9 Replies View RelatedMy command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies View RelatedFor as long as I have been using Autocad (10 yrs), if I typed an autolisp expression (in brackets) on the command line any output from the espression was echoed to the command line.
E.g. I type (+ 2 2) on the command line and Autocad returns with 4.
I installed SP 1 for Autocad 2013 and this bevaviour ceased, i.e. 4 did not appear in the command window although it did appear on the text screen.
I then un-installed SP1 and "normal" behavior resumed.
When SP 1.1 came out I installed that and again find that I do not get the returns from autolisp functions eched to the command window, only to the text screen.
I have now uninstalled SP 1.1, which I sort of hate to do, because I use those one line Autolisp functions quite alot.
Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedWe (the entire office) haven't had this issue in 2012, but in all of our 2013 installations, this is occurring.
In 2012, several rows are displayed in the command prompt, say for example you do a distance command, there are two rows of text showing the information the user might want to see. It displays the first row of, distance, the angle in XY plane and the angle from XY plane. The second row displays the delta X, delta Y and delta Z.
In 2013, it only displays delta X, delta Y and delta Z. The user have to hit "F2" to invoke the "AutoCAD Text Window" to view the first line of text.
I hope there is a variable setting for this, and not an oversight by Autodesk.