I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
I have just updated from 2012 to 2013, I've transferred all the necessary support file as I always do.I am trying to add a new Pallette to my custom Pallette group. However, when I try to drag blocks into the new Palette AutoCAD won't allow me to do so. I have to drag them first into another existing Palette, then drag them into the new one.
Then I have the problem of the New Palette disappearing when I next open Cad. Even after the New Palette .atc file appears in my support folder and I save my Workspace profile.
I'm using AutoCAD 2014. When we upgraded from 2013 I migrated all of my tool palettes and settings over to 2014 earlier this year. All seemed normal up until Friday when I created a new palette. That part was normal, but when I tried to drag a block from Design Center to that tool palette it wouldn't populate. It seemed like it was going to, it gave me that typical >---< under where the block would show up in the tool palette, but when I tried to release it in the palette, nothing.
Additionally, if I right click on a directory/folder in design center and select "Create Palette of Blocks" (which I have done a million times before), it will create the tab of the directory/folder I have created but does not populated it with the blocks within that directory/folder. Leaving me with a blank Tool Palette.
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
At my previous place of employment I used ACAD 2010 and ACAD 2011 Design Suites. One of the programs had tool palettes and/or design centers that enabled me to build my structures choosing blocks of wall types, windows, casework and doors, trees via a palette all in 3d and 2d form. I was able to change my views all around the 3d model and walk thru it with a camera. I did several homes using this program. I don't know what the difference is but ACAD 2013 does not appear to have it.
I want to share toolpalettes for multi-users in a network.
i create a share-folder with full-write-and-read-status for the cad-admin. then i added the folder into the _toolpalettepath-definition in the acad-options. all other users only have only-read-status for this folder.
this folder will be define in the first position of this list.
in theorie this will work - but now a costumer test this configuration. the problem is, that texts and seperator-lines in the paletten-defintion change the order - like example.
In other postings i read the name *.aws-files - but i did not understand the meaning of this file.
I've just installed 2013 and Service Pack 1.1 and downloaded (and installed) off line Help.All the Tool Palettes except my custom ones, are blank.
I can't find the command line, even after typing "commandline".And the search feature doesn't do anything.And I can't find where to send a helpdesk plea for support.
I have blocks in a drawing that were made using the 'retain' method. WHen I go to insert the block I cannot see the block preview at the crosshair cursor. The block only becomes visible once I have clicked the left mouse key at the insertion point.
This means I can't rotate it either as I can't see it until I have clicked to place it.
Which system variable (And what setting) will allow me to see the block as I'm inserting it?
We are in the middle of implementing AutoCAD 2013 to replace 2010 so at the moment I am converting / modifying our own code to suit the AutoCAD 2013 API.
One of our routines collects data from drawings (drawings are not fysically opened in AutoCAD) using the system variables 'LimMin' and 'LimMax' in order to collect all objects drawing within the titleblock.
Only the objects in the titleblock area need to be processed and this gives the engineers also the opportunity to add extra information outside the titleblock. We have used this method in 2007 and 2010 releases of AutoCAD succesfully.
But with AutoCAD 2013 I have run into a snag. As said does this routine not fysically open the drawing in AutoCAD it merely adresses the 'autocad database' so to speak. It seems that 2013 selects the variables from an opened active drawing instead of the 'opened' drawing by the routine. What do I need to modify in the lines of codes stated above to get this rouine up and running?
The workaround for this moment is to skip the collection in the titleblock area al together and select all objects in the entire drawing which does not speed up things very much
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
We have just recently install Building Design Suite Standard 2014 and the tool palettes DO NOT work.
Clicking on the standard palettes that load with ACAD will not even work. We have also tried to make new ones and the will not MAKE (for lack of words).
Here is the Autocad warning it gives us:
Unable to execute the tool. Possible causes are:
-The tool is not registered properly. Please check your installation.
-the tool is from another application and is incompatible with the current application.
Is there a short cout to getting to the source drawing file containing block data? Drilling down into the Program Files folder is tedious in the heat of getting drawings done.
I have a tool palette with our typical symbols which are blocks. All the blocks on the tool palette shows correct and the proerties of the blocks are correct but when I decide to drag a block in from the tool palette, no matter which block of 30, the same block inserts. How do I get the palette to insert the correct block.Using ARCH 2013, 64-bit, windows 7.
Wondering if there is a way to make a block that will embed itself into AutoCAD - so that when I open a new drawing or a drawing I've recieved from someone else, the block will always be there and ready to be used.
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
I'm trying to edit an architectural Title Block. I've went into block editor and did attribute definitions. However, when I save it I can't insert it into a drawing. Is there anything I can do to prevent this from happening?
We have a large project that we converted from 2012 to 2013 - it had always been a little buggy in 2012 as it was a piece together from another consultant. Now though, it is extremely slow and there seems to be a 'block reference' around every block in the drawing. You can drag your select window and they all pop up like crazy and slow things down immensely (see screen capture). You can select them individually, they have nodes on all 4 corners and to move them, scales your block up and down. I tried block replace to our blocks which we know are fine and same problem. It also seems to be drawing specific although audit is clean.
I have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
Every time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
Since AutoCAD 2013, I'm not able to use tracking when inserting block from tool palette. Example, I want to insert a door at 6 inches from a wall. I click the door from the tool palette, leave a tracking point at the wall corner, move the cursor in the right direction and type 6 follow by enter. The door is insert randomly in the drawing. It was working perfectly in previous release.
Actually I had to insert the door anywhere in the drawing and moving it at the right place and rotate it if required, it is very tedious.
I have a library of blocks that I built for our company to use. We recently upgraded from 2013 to 2014 and boy did it throw our library for a loop!
There is a check box (reflectivity) that leaves the materials black when the drawing shade mode is changed to Realistic (unless you go in and uncheck the reflectivity box) and while I have figured out how to alleviate that issue (by unchecking it on our tempate and saving it) I am still having a materials issue with our blocks.
I can open the block (and turn on Realistic mode) and all the pieces have their materials like they should. I then open a new drawing and insert the same block into the drawing .. one piece is sans material.
I cannot for the life of me figure out why it's there on one drawing but it gone when inserted. The new drawing has been purged and doens't contain anything it shouldn't.
I am a new user and working my way through the AutoCad Training Guide AutoCad LT 2012 No Experience Required. In Chapter 9 is Creating a Dynamic Block. After creating a block and inserting it into a new drawing you are able to open the block editor and begin using the Authoring Palettes. In my case the Authoring Palettes are blank except for a a blank Create a New Palette.
Under the Palette's Properties All Palettes are checked as on. How do I turn on the ones shown in the book? Constraints, Parameter Sets, Actions, and Parameters.
In our company we have a Tool Palette guru. She has READ/WRITE privileges to a Tool Palettes Development folder on our network. When she has an update to share with the masses, a network admin goes into the Tool Palettes Development folder and moves the corresponding files and folders to Tool Palettes folder where all CAD users have only READ access. All users point to the Tool Palettes folder on the network as well as a folder on tehor local machine so they can create their own custom Tool Palettes.
We have several users that have to reload their Tool Palettes every time they login to their workstation. Also, whenever a user logins to a different workstation, the Tool Palettes images have to be reloaded manually.I'm thinking there has to be a way so that
1) once the Tool Palettes are loaded for a user they don't have to be reloaded and 2) we don;t have to reload the Tool Palettes images when a user changes workstations.
I have a little problem, here at work we want to work with tool palettes, but when we select a hatch from the tool palette and want to hatch a object it says to specify insertion point.
We at work here we are drawing with polylines so we would like to select the object instead of specifying a insertion point. How can we change it in the toolpalette ?
