AutoCAD LT :: Missing Authoring Palettes In The Block Editor
Jan 12, 2012
I am a new user and working my way through the AutoCad Training Guide AutoCad LT 2012 No Experience Required. In Chapter 9 is Creating a Dynamic Block. After creating a block and inserting it into a new drawing you are able to open the block editor and begin using the Authoring Palettes. In my case the Authoring Palettes are blank except for a a blank Create a New Palette.
Under the Palette's Properties All Palettes are checked as on. How do I turn on the ones shown in the book? Constraints, Parameter Sets, Actions, and Parameters.
I am new to using Tool Palettes. I have created a folder on my C: drive which contains all my tool palettes. Right now, I get the symbol of a circle with a line drawn through it and cannot use my tool palettes.
In the Options tab, I noticed that there are the "Tool Palettes File Locations" and also "Authoring Palette File Locations". What is the difference between the two? Do I need to do something to both so I can use my tool palettes without difficulty?
I've recently upgraded to Win7 64bit. In Acad Architecture (trial versions 2010,2011 &2012)The content browser has nothing in it and the tool palettes aren't there.
I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
I just made myself another toolpalette, and the icons/images don't show up.Well, none of the icons/images show up except for the Junction Box (J with a circle around it.)I found that the Junction Box block is the only one that is NOT Annotative. All the other ones are ANNOTATIVE (as they should be.)
In Windows Explorer, it looks like images were saved for each new block I inserted into the toolpalette, but the images are blank except for the Junction Box of course. Is there a special way you have to put your Annotative blocks into a toolpalette so the icon/image shows up??
I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
tool palettes from a directory called ACAD2008 to ACAD2012. Tool palettes can't find the associated blocks because the support path still points to the ACAD200 Directory.
Is there a way to "globally" change the associated path? There are too many blocks to think about changing each one manually.
I downloaded Inventor 2014. My O/S is Windows 7 Ultimate. In the projects folder there is supposed to be Projects called iLogic 2011 Samples, iLogic 2011 Tutorials, iLogic 2012 Samples, Railing iLogic Sample Advanced, and Railing iLogic Sample Base. None of these PROJECTS show up in my projects editor. Do I have to completely uninstall and reinstall Inventor 2014 to get these projects to hopefully load?
I am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?
I haven't reviewed the recommended posts, but just a quick question. I am in the 'Dynamic Block Editor' command. I am trying to add a stretch application to the block (a simple section flag), and I have success up until the point where I save and go back into the drawing. There I do not get a pull-down tab and it will not allow me to stretch where I have defined the block through the 'Parameters' and 'Actions' tabs.
After I edit a block in the block editor, It regens to a blank black screen. Then I have to zoom extents and zoom back to where the block is. Is this normal? I would think it'd be better if it just put you back to where you were working. I understand the regen probably is necessary to change all the blocks that need to be updated. Just wonder why it puts you to a blank space.
I am currently using Autocad 2011 and my block editor suddenly won't open this morning... I have tried the blockeditlock to open it but nothing happens when I change the setting (0 or 1).
The tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
I just installed LT2013 and migratet my settings from LT2008.
Doubleclicking on a blok openes the block editor in LT2008, but not in LT2013.
In LT2008, the main cui file was acadlt.cui. And in this file the "block - double click" action was specified. And it worked in LT2008. I have my own cui-file which not contains any doubleclick-actions.
In LT2013, after migration from LT2008, the mail cui file is now my own cui-file (which not contains any doubleclick actions). Is this why it doesnt work ?
I have tryed to copy a doubleclickaction from acadlt.cui to "my own cui-file". And now it works.
Is this because "my " cui file now is the main cui file ? Why is "my" cui file the main cui file after migration ? is there a way to change, so acadlt.cui becomes the main cui file ?
If not, is there a way to transfer alle settings from acadlt.cui to "my" cui file ? I know i can do this one action of a time in "transfer".
Running 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
I have few hundred drawings ( used as symbols) I have to update; the issue I have is that many of them are dynamic blocks. When I process them, the program stops when opening one of those drawings having authoring elements. Is there any way to go over that message instead of clicking "No" every time?
Somehow I switched my UCS without noticing from X,Y,X to Z,Y,X. Though the UCS was changed my layout never switched orientation (flat square remained flat square and did not turn into a line).
I was alerted to the error when inserting the blocks. Half of the blocks were showing up as thin lines (in the Z plane) and half where showing up in the X plane.
I was able to correct the UCS by typing UCS, world view, then PLAN, current.
My question now: How can I fix the blocks that where "created" in the Z plane so that they can be inserted into the X plane without having to 'rotate3d' every time I insert a block?
I'm starting to wonder if I need to reset my program. When I click on my blocks, it won't allow me into block editor. I checked, and my Blockeditlock variable is set to zero, which should allow me in. But alas, it does not. When I type in "blockeditor" it says "read only". Which it's never done before.
i use autocad lite 2012 and it works fine except for when i edit a block (either block editor or block in place) when i open the block i can edit it fine but then when i go to close the block and save changes my computer will usually lag and most likely autocad will crash. i then lose all the work that i did in the block. i don't know how to fix this problem but it takes time out of the day. and always have to redo the work.
sometimes editing the block will only lag when it closes for after 10 seconds and other times it never goes back to the model and cad crashes
a side note is that i tried REFEDIT and the same problem still happens.
