When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I was given a customers title block but there are no defined attributes. I'm using AutoCad Electrical 2010. I have to double click on the title block and the edit block definition box pops up. I select the block to edit and click ok. I would like to use the enhanced attribute editor on these title blocks. Is there a way to define the attributes on this kind of title block using the enhanced attribute editor?
View 9 Replies View RelatedHow Can I Get All Block Attributes and change it
View 9 Replies View RelatedIs there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
Is there a way to change my mleader block attributes globally? For example, the tags in the drawing file are 200 series numbers, I want to make them 300 series, but keeping the same tens and ones digits (212 > 312).
View 0 Replies View RelatedI can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
I have a number of attributed dynamic blocks with multi vis states, that I wish to change from attribute text width factor 1, to 0.85, as per client specified requirement for the particular project. There are quite a number of different named blocks on each sheet, copies of each block, and quite a number of sheets involved.
Using BATTMAN or EATTEDIT I cannot select all attributes and change width factor in one go. It can only be done one at a time, a laborious task at best. GATTE appears not to be able to change width factor.
Any method of selecting all attributed blocks in a sheet, then changing the attribute text width factor on all to 0.85 in one fell swoop?
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
I discover synchronizing the attribute block does not work. Say I want to change the value E16 to E16a in block editor and after synchronizing the attribute does not change. What worse is that if I erase one attribute E16, then synchronize, the other attribute value (E18, E8) change to a different number (E16, E18*) . Attached is an example dwg.
View 2 Replies View RelatedI was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies View RelatedI have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedI'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedI'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
Is it possible to change the background color in Block editor from white to black?
View 2 Replies View Relatedusing AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
Is there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
I think a setting changed on my pc this weekend. I used to be able to double click the block and edit the attributes in the editor. Now, I can't change any values. I can only get to the dialog that shows info on the block and when I right click, I only have a few commands come out of the flywheel. I rebooted, but no go.
View 2 Replies View RelatedI want to make a macro that retrieves a block name by clicking on the block that will be part of a macro / diesel routine but I have not figured out yet.
I know that I can copy and paste from the LIST command but I was hoping to figure out how to get the block name just by clicking on a block.
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
Function ReadDWG(ByVal DWGName As String)
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
I have this one file .txt with this features:
Point North East Z Description
1 8618063,68 312415,09 75,87 T1
2 8618138,38 312428,89 70,57 B_RIO SECO
3 8618132,23 312427,75 71,90 ARENAL
4 8618126,23 312426,64 72,50 ARENAL
5 8618112,22 312424,06 73,77 ARENAL
6 8618099,78 312421,76 75,35 ARENAL
7 8618089,51 312419,86 75,84 ARENAL
8 8618132,23 312427,75 71,94 J
9 8618112,23 312424,06 73,88 J
10 8618099,82 312421,78 75,36 ARENAL
11 8618089,48 312419,87 75,85 E_1
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then
MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation)
End If
On Error GoTo ControlErroresBD
Dim AcadDocPt As Document =
[Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity
For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection
AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite)
Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
[Code] .....
I have used the FDO to connect to my SHP files. I have used one data attribute to get a rotation for my blocks. I have also used a feature Label to display the text I am interested in.
When I save to DWG, the feature labels come in as Text. I would like the text to go to the correct block attribute.
Is there a way to do this? I did not see anything in the Style Editor to use my blocks' attributes, only the geometry.
I am aware of using MAPIMPORT to set attributes from the data, but they do not come in rotated, and I have more conditions on which block to use, not just one field to decide the block name.
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim
doc AsDocument = Application.DocumentManager.MdiActiveDocument
Using docLoc AsDocumentLock = doc.LockDocument
Dim db AsDatabase = HostApplicationServices.WorkingDatabase
[Code]....
