AutoCad :: Global Edit / Block Attributes Rotation BACK To Match Block Rotation
Dec 13, 2012
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
View 2 Replies
ADVERTISEMENT
Jul 28, 2011
I have some blocks with lines and some attributes.
I want to be able to rotate the block freely but I want to always have the rotation of the attributes at 0 deg.
Is there any way to lock the value of the attributes rotation to 0?
View 3 Replies
View Related
Apr 4, 2011
Title Block.dwg
I am trying to create a custom Title block and want items such as Title, sub title and location to be locked in place but editable when inserted. The next requirement I have is to have these attributes rotated 90 degrees.
What I am getting is a block that in the editor looks exactly the way I want it to. However when I import the block into Paper Space and enter the information, those attributes that were defined as 90 degrees are presenting without any rotation at all.
View 5 Replies
View Related
Jul 27, 2012
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
View 9 Replies
View Related
Mar 6, 2013
I have an interior elevation callout block with four arrows, noting the N, S, E, W interior wall elevations. I trick I use to rotate Text while keeping the Text oriented in the upright position is to place a Point Parameter at the center of the text then set the "Chain Actions" to Yes. Then I use the Move Action to tie the text to the Point Parameter. Next step is to use a Rotation Action to select only the Point Parameter, which rotates the Point Parameter and brings the text along with it, keeping the text oriented in the upright reading position always. As an example, think about a viewport tag with a North arrow, and the letter "N" at the arrow tip. When you rotate the arrow, the "N" position rotates with the arrow's point but always is oriented upright.
View 3 Replies
View Related
Aug 22, 2011
My company is useing LDD2009, as well as map. when we make notations in our plans we use a block that is basicly a square with an attribute inside to represent a number, the nuber then corresponds to the same number and a description in a table.
Now, I have been asked to create / recreate (a)the block that would rotate per viewport, also; we are not usin dynamic leaders.
is there a way to either continue with the block or create a dynamic leader that would rotate per viewport, even in other drawings that have xrefs attached like Plan & Profile sheets that are separate drawings.
I'm not sure how autocad would handle the rotating as well as the location of the block and still have the leader point in the same place.
View 2 Replies
View Related
Oct 22, 2013
I'm trying to write a vb script to extract information from the CAD drawing. While testing, i found that for some drawing blocks, the corresponding AcadBlockReference Rotation returns 1.57, but when i look at the actual drawing, block properties, the rotation is 0.
View 3 Replies
View Related
Jul 26, 2012
I am using Express Tools Block Replace how do I keep the blocking being replace from rotating to the orientation of the block using for replacement?
View 2 Replies
View Related
Nov 25, 2013
I'm just trying my hand at learning to create some dynamic blocks, but need a solution to keep the text unrotated. I have attached a file of my troublesome file for you experts to look at, if possible.
PileTest.dwg
The file is basically a plan view of 4x foundation columns for overhead line towers (pylons). These towers can be different sizes and at different orientations, hence the dynamic options I have applied. However, when I rotate the block I want the text to rotate with it (to keep aligned with each column A, B, C, D), but I don't want rotation to be applied to the text, if that makes sense?
I have a feeling that constraints might work, although I know nothing about them, but these usually lag my PC. At present I am having to explode the block and apply a 0 rotation to all the text.
View 8 Replies
View Related
Dec 28, 2012
We have a dynamic section marker block. You can flip it, rotate it and stretch it. Some of our drawings have a lot of them. For some instances of the block that are rotated, opening the drawing or inserting another copy of the block causes the fill in the arrow to move back to its original orientation (see images). The darn things even plot incorrectly.
Flipping the broken ones back and forth fixes them, but it is silly that a drafter would have to do that with each one.
View 4 Replies
View Related
Jul 11, 2011
I have a section symbol that I want to rotate and keep the text at 0degress relative to UCS. The text is not in the middle so I can't rotate about the cetner of the text. I'll attach the block so it's more clear.
Right now the only fix is to assign a seperate rotation grip to both attribute text items.
View 4 Replies
View Related
Sep 30, 2013
I am making a simple continuation block (attached) and I am trying to get it to have a rotation parameter along the polyline. I am able to do that, but the only issue is the flip parameter goes all weird when I do so (the text starts distancing itself from the polyline when stretched, rotated and flipped).
View 4 Replies
View Related
Nov 21, 2013
I can not for the life of me get my attributes to rotate with my block. I've attached the block to better understand what I'm talking about. I'd like the attributed text to rotate with the brown line. I don't care if the text ends up upside-down, I just want it to rotate with the block.
View 1 Replies
View Related
Aug 29, 2011
when trying to create dynamic rotation for a block with attributes. If I constrain the attribute to a line in the block it damaged the behavior of the block when using the dynamic rotation.
I tried both multiline and non- multiline attributes. I tried to fiddle with the "constraint settings" and leave only the Parallel constraint running with no effect.
When I open a new clean acad drawing and paste the block there, no problem.
View 2 Replies
View Related
Jan 11, 2008
We use this light switch block for work. For the life of me, I can't figure out how to make the attribute to stay (LOCKED) at rotation 0 when inserting no matter which angle the swtich is inserted. The only way the text stays at rotation 0 is if I insert the block as is (pointing right), then align the switch to a wall. The block is created with alignment grip. So if I add the switch to a wall at an angle (eg:45 degrees), the text will be rotated and stay rotated. If I insert the switch on the left side of the wall, the attributes will be upside down. I can manually rotate the attributes back to 0 degrees and it will stay locked to 0 degrees. But what I want it to do is to be inserted at 0 degrees to begin with.
View 9 Replies
View Related
Jan 7, 2013
I have a block that I'm trying to convert for dynamic use.
In the first image, you'll see the items that I want to have rotatable in blue. The items in red should NOT rotate. That part seems to work fine. But the items that do rotate don't behave as expected.
I created the rotate parameter selecting the center of the red circle as the base point. Shouldn't that cause ALL the items to rotate about that center point?
As you'll see from the second image, the blue line rotates about some other point.
EDIT: Well I guess it only does it if I have the blue horizontal line defined with a length constraint. I also need to have that line dynamic--I need to make it longer/shorter.
I've attached a dwg file with the block in it--it's at the top of the block list (___SectMark2).
View 9 Replies
View Related
May 25, 2010
Wondering if there was a way to have text maintain a rotation angle of 0 while being included in a rotation parameter. I am wanting the "N" for my North Arrow to follow the direction of the symbol of my viewport tag without the "N" character rotation angle changing with it.
View 9 Replies
View Related
Dec 3, 2013
I have excel tables that contain 4 columns of data.
The Y co-ords pf the required object
The X co-ords pf the required object
The rotation of the required object
The object number
What would I need to do to insert a block at the coordinates to the rotation shown then have a leader with the point number labeling the block (but the text not be rotated to the angle of the main block.
View 2 Replies
View Related
May 15, 2013
Is there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
View 6 Replies
View Related
Mar 8, 2012
Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 6 Replies
View Related
Oct 19, 2011
I'm trying to edit attributes of a block but is giving error.
private void ChangingAttibutes1(ObjectId[] objectIdList) { for (int i = 0; i < objectIdList.Length; i++) { ObjectId objectId = objectIdList[i]; BlockReference blockReference =
[Code].....
View 4 Replies
View Related
Mar 22, 2013
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
View 2 Replies
View Related
Sep 21, 2011
I want to rotate a drawing in my paper space, but without rotating it in model space. So that I still can work on it easily in model space.
View 9 Replies
View Related
Jun 14, 2012
Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
View 7 Replies
View Related
Oct 7, 2013
Is there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies
View Related
Jan 31, 2013
I am inserting a block (strSectionBlk) into an AutoCAD 13 drawing using VB .NET. This block has an attribute with tag "FAB_HEIGHT" and I want to edit its string to the value of a variable "strFabHeight" at the time of the insertion of the block. The insertion of the block is fine but I've failed to edit the attibute.
Public Sub InsertSection()
'Call the Function that decides the name of the head section block strSectionBlk
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
[code]....
View 5 Replies
View Related
Jan 30, 2013
I am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
View 4 Replies
View Related
Sep 18, 2013
I cannot edit any block attributes in my drawing. When attempting to do so, the command line states: "The object is on a locked layer". All of the layers in my drawing are unlocked, on and not frozen.
View 2 Replies
View Related
Jul 7, 2012
I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
View 3 Replies
View Related
Aug 6, 2013
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
View 9 Replies
View Related
Apr 27, 2012
When I first create block or edit a block and add attributes, the attributes will not show up on the block.
I but insert the block again for the attributes to show up.
Is there a way to update blocks with out having to re-insert the block again?
View 1 Replies
View Related
