I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
View 3 RepliesI am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
I'm trying to edit attributes of a block but is giving error.
private void ChangingAttibutes1(ObjectId[] objectIdList) { for (int i = 0; i < objectIdList.Length; i++) { ObjectId objectId = objectIdList[i]; BlockReference blockReference =
[Code].....
I am inserting a block (strSectionBlk) into an AutoCAD 13 drawing using VB .NET. This block has an attribute with tag "FAB_HEIGHT" and I want to edit its string to the value of a variable "strFabHeight" at the time of the insertion of the block. The insertion of the block is fine but I've failed to edit the attibute.
Public Sub InsertSection()
'Call the Function that decides the name of the head section block strSectionBlk
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
[code]....
I cannot edit any block attributes in my drawing. When attempting to do so, the command line states: "The object is on a locked layer". All of the layers in my drawing are unlocked, on and not frozen.
View 2 Replies View Relatedusing AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
When I first create block or edit a block and add attributes, the attributes will not show up on the block.
I but insert the block again for the attributes to show up.
Is there a way to update blocks with out having to re-insert the block again?
my job is to make an editor for blocks in C#. There should be a WPF-window were the user can see a list of blocks. He selects one and than he should see an overview about block attributes like insertionpoint, basepoint, rotation and scaling and he should be able to edit these attributes in this form.
I know how i can populate a list of block names, but I fail at finding an opportunity to edit these attributes.
I get the blocktablerecords, but then?
I have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 Replies View RelatedI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
View 2 Replies View RelatedI have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.
Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies View RelatedI have a .dwg file which contains numerous blocks (70 or so) and they all have unique names.All these blocks have nested text.
I want to edit the attributes of all the text, in all these blocks, such that they assume the same text style, text layer and colour.
Obviously, with so many blocks, I want to avoid clicking on the text and editing the attributes individually.
I tried a lisp file called ATcolour.lisp, but even this is very time consuming.
Is it possible to link Autocad to MS Access?
I want to modify text attributes associated with a block based on the input into an access database. I've read I could link the two using DB Connect, but so far all I've gotten is the Data View - Summary.
How to make a block with attribute text (like showing on sectioning?) a circle with arrow then line and there is editable text on the top of line or editable text inside the circle..
View 9 Replies View RelatedHow I rotate a block but set the text to stay readable.
At the moment I have a 600x600 light fitting with a Tag inside for typing the letter of the fitting. E.G. Type A, B, C
I have a rotate function also so I can rotate the fitting to the orientation of the room.
But when I rotate the fitting the text rotates also, therefore if I turn the fitting round 90 degrees the text is on its side. How do I rotate the block but leave the text orientation the correct way?
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am trying to create a block and include attributes that have the background masked. I know how to mask the background in mtext but am curious if it is possible to do on attributes.
View 2 Replies View RelatedI have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
I am using managed classes to insert multiple block references into model space. I wish to insert a block and then move it (change its Position) which I can do. The problem is that my attributes associated with this block reference do not move.
View 6 Replies View RelatedI would like to know how, if possible to make the attributes of a block show up as text. Example:
I am working on a power utility design where each power pole has a sequential name and may or may not have units that need to be added into a contract. I have my attributes set up where I can go in and assign a required number to a unit so I can export my data into excel. The problem I am having is that I have to enter the text and change the attribute quantities separately. Also, there are 40 or so different units and only a few certain ones required at each pole. Is there a way to set the attribute only to display text if the quantity is greater than zero so my list is not 40 units long at each pole?
(I am using Autocad 2013, 64 bit)
I wrote this little piece of code (attached) that explode all the blocks in the current drawing.This is magical, compared with what we had to do in VBA.
This works perfectly but now I want to go deeper and managed blockreferences with attributes.Based on my code, I can determine if oBTR.HasAttributeDefinitions is true or false.
If the blockreference has attributes, I suppose I will have to use Explode instead of ExplodeToOwnerSpace.
My first question is, using explode, I need before to know in which space the blockreference is inserted (Model or any layout) so to insert the exploded entities correctly. So, is it possible from a blockreference to get its own SpaceId?
An another idea I had is to edit the blockreference (not the block definition) to replace attributes with text...
I really miss the option to right-click text in the text editor window. It was the simplest way to e.g. edit bullet styles etc.
View 12 Replies View Relatedhow to make make block attributes text visible next to my blocks?
View 4 Replies View RelatedIf it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies View RelatedI have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies View RelatedFrom the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
I was wondering how I can manage to make text attributes show in an xref.
If this is not possible, is there a way to have text on a xref that is locally editable?
When I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?