I have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 RepliesI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
View 2 Replies View RelatedI am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
I have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.
Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies View RelatedI have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
View 3 Replies View RelatedI sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am trying to create a block and include attributes that have the background masked. I know how to mask the background in mtext but am curious if it is possible to do on attributes.
View 2 Replies View RelatedI have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
I can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
Basically, whenever you want to insert a block from outside of this drawing to it you can see it on the screen but after insertion it is disappearing!
+ There is no frozen layer
+ It happens on Modelspace and Paperspace both
+ It happens just on the blocks that you want to insert from outside
+ I used Design Centre to insert a block same issue occurs. The block is not inserted in to the drawing as a hidden object because it is on the Purge list but you can find it on the Insert Block window dropdown menu and when you want to insert it from there again same issue happens! I guess there might be an AutoCAD variable is playing with us here that somebody accidentally changed it.
+ When you use the Quickselect you cannot find any of those blocks on the drawing as well
I have recently ran in to an issue where the imported AutoCAD blocks disappear when I export to .dwf, this only appears to happen after I add the revision table. If I were to add the revision prior to importing the blocks all seems ok. I have tried removing the block and deleting the definitions from the Inventor.dwg then re-inserting once more and I still have the same issue. The only real working solution I've found so far is to start from new and reproduce the drawings.
View 1 Replies View Relatedusing AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I recently added a block ( by dragging & dropping from our dws block library file) to our shared Tool Palettes. The block showed up properly on everone's computer the day I added it. However each morning when we restart our computers the block is no longer on the palette and I have to redrag & drop it. I thought that prerhaps I needed to export the updated toolpalette, but when I go to the customize tool palettes dialog box and right click on the toolpalette I don't see the export or import options. I am at a loss. We are using AutoCAD Architecture 2013
View 1 Replies View RelatedFunction ReadDWG(ByVal DWGName As String)
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
How Can I Get All Block Attributes and change it
View 9 Replies View RelatedI have this one file .txt with this features:
Point North East Z Description
1 8618063,68 312415,09 75,87 T1
2 8618138,38 312428,89 70,57 B_RIO SECO
3 8618132,23 312427,75 71,90 ARENAL
4 8618126,23 312426,64 72,50 ARENAL
5 8618112,22 312424,06 73,77 ARENAL
6 8618099,78 312421,76 75,35 ARENAL
7 8618089,51 312419,86 75,84 ARENAL
8 8618132,23 312427,75 71,94 J
9 8618112,23 312424,06 73,88 J
10 8618099,82 312421,78 75,36 ARENAL
11 8618089,48 312419,87 75,85 E_1
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then
MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation)
End If
On Error GoTo ControlErroresBD
Dim AcadDocPt As Document =
[Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity
For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection
AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite)
Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
[Code] .....
I have used the FDO to connect to my SHP files. I have used one data attribute to get a rotation for my blocks. I have also used a feature Label to display the text I am interested in.
When I save to DWG, the feature labels come in as Text. I would like the text to go to the correct block attribute.
Is there a way to do this? I did not see anything in the Style Editor to use my blocks' attributes, only the geometry.
I am aware of using MAPIMPORT to set attributes from the data, but they do not come in rotated, and I have more conditions on which block to use, not just one field to decide the block name.
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim
doc AsDocument = Application.DocumentManager.MdiActiveDocument
Using docLoc AsDocumentLock = doc.LockDocument
Dim db AsDatabase = HostApplicationServices.WorkingDatabase
[Code]....
I have 3 attribute in one block , i made 3 options for visibilty1
so i need in visibilty (1) i can show only the text 11
and i need in visibilty (2) i can show only the text 22
and i need in visibilty (3) i can show only the text 33
I have a autocad file displaying room layout of a floor. Each room has two blocks. One for displaying the Fixture / Fitment data and second for Room details (Room no, Area).
Is there a way we can merge the two block attributes in a single block with both attributes.
I need reading the values from an Mleader object that contains a block. I can get attributes from normal blocks with no problem, but I am struggling with this.
I can get all the way up to casting the attributes, but when I try getting the Attribute Reference, the code crashes. How do I get the AttributeReference from the AttributeDefinition? As it is now, if I declare the AttributeDefinition, the values return as nothing.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument Dim acCurDb As Database = acDoc.Database Dim acEd As Editor = DocumentManager.MdiActiveDocument.Editor '' Start a transaction Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction() Try Dim acBt As BlockTable =
[code].........
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....