I have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.
my job is to make an editor for blocks in C#. There should be a WPF-window were the user can see a list of blocks. He selects one and than he should see an overview about block attributes like insertionpoint, basepoint, rotation and scaling and he should be able to edit these attributes in this form.
I know how i can populate a list of block names, but I fail at finding an opportunity to edit these attributes.
I have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
I am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
I am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection() 'Call the Function that returns strSectionBlk (the Head Section drawing) getSectionDwg(strModel, strHeadType) 'Start the database Dim db As Database db = HostApplicationServices.WorkingDatabase() [Code] .....
I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am trying to create a block and include attributes that have the background masked. I know how to mask the background in mtext but am curious if it is possible to do on attributes.
I have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
I am using P&GD2013..If I use a template from the designs gallery it will automatically replace photographs and create new pages to match the number of photographs I import. If I make my own template I can't make it do that.I have tried modifying a supplied template but that seems not to work either. All I want to do is to create a template of an A5 landscape page with one centred 7 x 5 photograph and then import forty photographs. Do I really have to drag each one from the bitmap gallery ?
Long short, we have dozens of drawings and the original base view was deleted, so the title block uses the next view placed to populate. We would like to drop in a new view, and use that as the view the title block looks to. The only way we've figured how to do this is to delete the other 8 or so views (that are already all detailed)., place the view we want to populate the title block, then redraw all the views we just deleted.
Is there an easier way to chose a new base/primary view for a drawing?
I'm using AutoCAD 2014. When we upgraded from 2013 I migrated all of my tool palettes and settings over to 2014 earlier this year. All seemed normal up until Friday when I created a new palette. That part was normal, but when I tried to drag a block from Design Center to that tool palette it wouldn't populate. It seemed like it was going to, it gave me that typical >---< under where the block would show up in the tool palette, but when I tried to release it in the palette, nothing.
Additionally, if I right click on a directory/folder in design center and select "Create Palette of Blocks" (which I have done a million times before), it will create the tab of the directory/folder I have created but does not populated it with the blocks within that directory/folder. Leaving me with a blank Tool Palette.
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit NVIDIA Quadro 600 Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz 8 GB ram - Two 1TB raid
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock Dim BlockRef As AcadBlockReference Dim DynEntBlock As AcadEntity Dim DynObjRefH As IAcadBlockReference [Code]........
I can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant") theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0) Dim varAttributes AsObject varAttributes = theBlock.GetAttributes varAttributes(0).TextString ="3 Ports" varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
i have been trying for an option called auto numbering of attributes. i have a drawing of floor plan in every room there are 5 to 6 switch boards.I have to give a code and numbers to switchboard like SB1, SB2.......SB42 etc. there are like some 150 switchboards, so i have made an attribute with code and number. problem is when ever i have to add or delete some switch boards some where in the middle. again i have to start renumbering my switch board attribute blocks again from starting. It is very time consuming. is there any command renumbering all attribute blocks in one command.
I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers() Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager Dim myTransForPageNumbers As Transaction
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
Function ReadDWG(ByVal DWGName As String) Dim AcadApp As AcadApplication Dim AcadDoc As AcadDocument Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation) End If On Error GoTo ControlErroresBD Dim AcadDocPt As Document = [Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite) Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
I have used the FDO to connect to my SHP files. I have used one data attribute to get a rotation for my blocks. I have also used a feature Label to display the text I am interested in.
When I save to DWG, the feature labels come in as Text. I would like the text to go to the correct block attribute.
Is there a way to do this? I did not see anything in the Style Editor to use my blocks' attributes, only the geometry.
I am aware of using MAPIMPORT to set attributes from the data, but they do not come in rotated, and I have more conditions on which block to use, not just one field to decide the block name.
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim doc AsDocument = Application.DocumentManager.MdiActiveDocument Using docLoc AsDocumentLock = doc.LockDocument Dim db AsDatabase = HostApplicationServices.WorkingDatabase
I have a autocad file displaying room layout of a floor. Each room has two blocks. One for displaying the Fixture / Fitment data and second for Room details (Room no, Area).
Is there a way we can merge the two block attributes in a single block with both attributes.