I am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
View 3 Replies View RelatedI can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....
I wish to insert a title sheet dwg, which has attribute definitions, as a block in another dwg. I can insert it, and if I explode it, the attribute definitions appear. Otherwise they are not added to the database.
I am using standard code, which I can attach. it starts
Dim btr As BlockTableRecord
..
Dim blk As BlockReference = New BlockReference(ip, blkid)
' insert block
..
btr.AppendEntity(blk)
If btr.HasAttributeDefinitions Then
ForEach attID As ObjectId In btr
etc.
but btr.HasAttributeDefinitions = False
I have a ton of blocks with attributes. Sometimes when I insert them, AutoCAD (2011) prompts me in the command line (perfect). Other times, a prompt box appears to insert attribute definitions (annoying).
What setting do I have wrong, or am I setting the blocks up incorrectly?
Whenever I try to insert a block with attributes, the text comes in backwards/upside down... I've tried attedit, battman, mirror, properties, attsync, regen and torient. None of them work.
I've inserted blocks into drawings in the past with no problems, using the same template and workspace..
I'm trying to edit attributes of a block but is giving error.
private void ChangingAttibutes1(ObjectId[] objectIdList) { for (int i = 0; i < objectIdList.Length; i++) { ObjectId objectId = objectIdList[i]; BlockReference blockReference =
[Code].....
I am inserting a block (strSectionBlk) into an AutoCAD 13 drawing using VB .NET. This block has an attribute with tag "FAB_HEIGHT" and I want to edit its string to the value of a variable "strFabHeight" at the time of the insertion of the block. The insertion of the block is fine but I've failed to edit the attibute.
Public Sub InsertSection()
'Call the Function that decides the name of the head section block strSectionBlk
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
[code]....
I cannot edit any block attributes in my drawing. When attempting to do so, the command line states: "The object is on a locked layer". All of the layers in my drawing are unlocked, on and not frozen.
View 2 Replies View Relatedusing AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
When I first create block or edit a block and add attributes, the attributes will not show up on the block.
I but insert the block again for the attributes to show up.
Is there a way to update blocks with out having to re-insert the block again?
my job is to make an editor for blocks in C#. There should be a WPF-window were the user can see a list of blocks. He selects one and than he should see an overview about block attributes like insertionpoint, basepoint, rotation and scaling and he should be able to edit these attributes in this form.
I know how i can populate a list of block names, but I fail at finding an opportunity to edit these attributes.
I get the blocktablerecords, but then?
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies View RelatedIs there a way i can insert a title block through the design center by selecting the the layout and dragging it in. When i bring it in it gives me just the blank paper without the title block.
View 4 Replies View RelatedI have some blocks with attributes, with the default of some of the attributes being blank. When I try to transfer the block to my Tool Palette, the block loses the attributes that have blank defaults. Why are these attributes disappearing from the block?
View 8 Replies View RelatedI am not very familiar with block attributes or data extraction. I have lots of questions.
i have 20 blocks each inserted multiple times. I would like to provide drop down menus to track each individual part and label size, location, etc. Can i insert attributes to one block and copy the attributes to other blocks?
Can i pull in info from an excel document, or do i have to enter the info line by line in the lookup table? (i have 400 names to assign in one of the dropdown menus)
Step by step process to pull the info from the attributes in these blocks into an Access document?
I work for a company that has several AutoCad seats. I have created a block with 4 attributes. On my computer and others the block works fine. On one computer 3 of the 4 attributes are placed at 0,0 instead of with the block.
View 2 Replies View RelatedI have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.
Is there any way to fill inn attributes on individual blocks belonging to an associative path array?
View 7 Replies View RelatedEvery time I attempt to insert a block with an attribute in it from my tool pallet I get the error FATAL ERROR: Unhandled Acess Violation Reading 0x0020 Exception at 4260af08u.
If I insert a block without attributes it works fine. I even tried building a block in 2013 and then inserting it from the toolpallet, still fatal error's out.
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
I am trying to create a block and include attributes that have the background masked. I know how to mask the background in mtext but am curious if it is possible to do on attributes.
View 2 Replies View RelatedI have searched high and low and still could not find a tutorial to really explain how to create a drawing title with attributes (Detail Number, Sheet Number, Detail Title, Detail Scale). All I find are on creating dynamic block, which I could achieve, but I need one for a block that has (or will have) attributes.
I was able to find a tutorial on attributed door numbers, but it does not work for drawing titles that has attributes. GOAL: I would like to have all my seven drawing titles in one file and to be able to stretch the leg of any selected title to a desired length.
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
When I edit a block in place, REFEDIT toolbar pops up. This is good.
But why even I clicked "Add to working set" button on the toolbar, it still asks me select "Add" in command line?
Apparently I already selected "Add" button.
Is there a way to skip this command line option?
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I believe in our previous AutoCAD 2009 software we could create a block with attributes and save the drawing as a block, either wblock or create block. When inserting this block into another drawing we would get the attribute dialog box appear and complete the required information. Within AutoCAD 2012 we have made a block with attributes, when we insert this drawing into another drawing the block is inserted but no attribute dialog box. If I click on the block I see edit block definition dialog box with the drawing file name of the block and the block name. If I explode the block I then have my block and when clicking the block the attribute dialog box appears. It seems that in AutoCAD 2012 when we create the block and save the drawing and then insert the drawing it becomes a nested block type. Is there a setting I need to switch to prevent this and have the block insert and then click on it to change the attributes as required?
View 5 Replies View RelatedI have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View Related