AutoCad :: Rotate Block - Text Attributes
May 10, 2013
How I rotate a block but set the text to stay readable.
At the moment I have a 600x600 light fitting with a Tag inside for typing the letter of the fitting. E.G. Type A, B, C
I have a rotate function also so I can rotate the fitting to the orientation of the room.
But when I rotate the fitting the text rotates also, therefore if I turn the fitting round 90 degrees the text is on its side. How do I rotate the block but leave the text orientation the correct way?
View 9 Replies
ADVERTISEMENT
Jan 23, 2012
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
View 5 Replies
View Related
Nov 18, 2013
I'm trying to get a dynamic block to rotate the attached attributes from a left justification in the vertical position to a center justification in the horizontal position. I managed to do this with 2 Visibility States, but anyway to do this with only the one set of attributes. I'm using AutoCAD 2012.
View 2 Replies
View Related
Mar 1, 2013
Switches_.dwg
I have a rotate feature set up and I have a tag for the block. When I rotate the block, the text rotates as I have set it up to do but it turns upside down or sideways as the block rotates. I would like the text to stay the same orientation but just move round with the block as the example below.
I want my block to do this.dwg
View 2 Replies
View Related
Jul 9, 2013
Is it possible to link Autocad to MS Access?
I want to modify text attributes associated with a block based on the input into an access database. I've read I could link the two using DB Connect, but so far all I've gotten is the Data View - Summary.
View 3 Replies
View Related
Sep 13, 2011
How to make a block with attribute text (like showing on sectioning?) a circle with arrow then line and there is editable text on the top of line or editable text inside the circle..
View 9 Replies
View Related
Sep 18, 2008
I am using managed classes to insert multiple block references into model space. I wish to insert a block and then move it (change its Position) which I can do. The problem is that my attributes associated with this block reference do not move.
View 6 Replies
View Related
Jul 7, 2012
I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
View 3 Replies
View Related
Feb 7, 2012
I wrote this little piece of code (attached) that explode all the blocks in the current drawing.This is magical, compared with what we had to do in VBA.
This works perfectly but now I want to go deeper and managed blockreferences with attributes.Based on my code, I can determine if oBTR.HasAttributeDefinitions is true or false.
If the blockreference has attributes, I suppose I will have to use Explode instead of ExplodeToOwnerSpace.
My first question is, using explode, I need before to know in which space the blockreference is inserted (Model or any layout) so to insert the exploded entities correctly. So, is it possible from a blockreference to get its own SpaceId?
An another idea I had is to edit the blockreference (not the block definition) to replace attributes with text...
View 6 Replies
View Related
Apr 26, 2012
how to make make block attributes text visible next to my blocks?
View 4 Replies
View Related
Aug 7, 2012
If it is possible to assign multiple attributes to a single line text within a block, and be prompted for them upon insertion.
View 3 Replies
View Related
Oct 29, 2008
I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies
View Related
Apr 13, 2013
i used autocad 2010 and when i create a new block and rotate in that block text hhave been changed by cad.
is there any option to create block and never changed text when did mirror or rotate.
View 1 Replies
View Related
Feb 14, 2013
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
View 9 Replies
View Related
Oct 26, 2012
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
View 9 Replies
View Related
Oct 31, 2013
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
View 9 Replies
View Related
Nov 18, 2011
I have this snippet that inserts a block “Exit_Arrow”. The block has one attribute. Is it possible to force the attribute to remain at “0” rotation regardless what angle the bock is rotated?
(defun C:Exit_Arrow (/ LA DS)
(setq LA (getvar "clayer"))
(setq DS (getvar "dimscale"))
(C:TTEXT)
(command "._insert" " Exit_Arrow " pause DS "")
(setvar "clayer" LA)
(princ))
Is it possible to create blocks whose attributes remain at "0" rotation regardless the host block's rotation?
View 9 Replies
View Related
Apr 8, 2013
I can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
View 2 Replies
View Related
Dec 12, 2013
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
View 9 Replies
View Related
Sep 19, 2011
I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
View 6 Replies
View Related
Dec 13, 2012
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
View 2 Replies
View Related
Feb 29, 2012
Function ReadDWG(ByVal DWGName As String)
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
View 2 Replies
View Related
Aug 7, 2013
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
View 3 Replies
View Related
May 22, 2013
How Can I Get All Block Attributes and change it
View 9 Replies
View Related
Apr 24, 2013
I have this one file .txt with this features:
Point North East Z Description
1 8618063,68 312415,09 75,87 T1
2 8618138,38 312428,89 70,57 B_RIO SECO
3 8618132,23 312427,75 71,90 ARENAL
4 8618126,23 312426,64 72,50 ARENAL
5 8618112,22 312424,06 73,77 ARENAL
6 8618099,78 312421,76 75,35 ARENAL
7 8618089,51 312419,86 75,84 ARENAL
8 8618132,23 312427,75 71,94 J
9 8618112,23 312424,06 73,88 J
10 8618099,82 312421,78 75,36 ARENAL
11 8618089,48 312419,87 75,85 E_1
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then
MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation)
End If
On Error GoTo ControlErroresBD
Dim AcadDocPt As Document =
[Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity
For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection
AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite)
Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
[Code] .....
View 9 Replies
View Related
Apr 20, 2012
I have used the FDO to connect to my SHP files. I have used one data attribute to get a rotation for my blocks. I have also used a feature Label to display the text I am interested in.
When I save to DWG, the feature labels come in as Text. I would like the text to go to the correct block attribute.
Is there a way to do this? I did not see anything in the Style Editor to use my blocks' attributes, only the geometry.
I am aware of using MAPIMPORT to set attributes from the data, but they do not come in rotated, and I have more conditions on which block to use, not just one field to decide the block name.
View 2 Replies
View Related
Mar 15, 2012
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim
doc AsDocument = Application.DocumentManager.MdiActiveDocument
Using docLoc AsDocumentLock = doc.LockDocument
Dim db AsDatabase = HostApplicationServices.WorkingDatabase
[Code]....
View 2 Replies
View Related
May 10, 2011
I have 3 attribute in one block , i made 3 options for visibilty1
so i need in visibilty (1) i can show only the text 11
and i need in visibilty (2) i can show only the text 22
and i need in visibilty (3) i can show only the text 33
View 8 Replies
View Related
Nov 5, 2012
I have a autocad file displaying room layout of a floor. Each room has two blocks. One for displaying the Fixture / Fitment data and second for Room details (Room no, Area).
Is there a way we can merge the two block attributes in a single block with both attributes.
View 1 Replies
View Related
Sep 27, 2011
I need reading the values from an Mleader object that contains a block. I can get attributes from normal blocks with no problem, but I am struggling with this.
I can get all the way up to casting the attributes, but when I try getting the Attribute Reference, the code crashes. How do I get the AttributeReference from the AttributeDefinition? As it is now, if I declare the AttributeDefinition, the values return as nothing.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument Dim acCurDb As Database = acDoc.Database Dim acEd As Editor = DocumentManager.MdiActiveDocument.Editor '' Start a transaction Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction() Try Dim acBt As BlockTable =
[code].........
View 2 Replies
View Related
Aug 11, 2011
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....
View 3 Replies
View Related
