Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
Apparently text will always rotate about the bottom left grip and not the justified grip.
This is a massive issue that makes this great feature virtually worthless.
If the text is going to rotate in multiple viewports you need it to stay in the same place!
Is there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Since it's a snow day here I have some time to work on some office stuff. I've created my new template now I want to update my blocks. Because I have to place blocks that show a direction for operation I have created 4 blocks of the same symbol-up, down, left, right. I do this because these blocks have text with them that needs to be orientated to the layout (otherwise I get a nasty letter back from the fire marshal). Now for the text that is constant I just use a annotative text style and have the text match the layout but the text that is an attribute I'm not sure if that can be annotative and match the layout as well.
View 9 Replies View RelatedI am trying to make a dynamic block with the rotate function and I am having no luck. I have the attributes locked.
When moving the rotate grip the angle changes but the text does not rotate.
How to (annotate / match orientation) for multiple blocks in the one go ?
I have to alter blocks with alomst every survey dwg I receive whilst at work. Just wondering if there is a quick way to do all blocks in the one go !
We have our description keys set to use parameters to scale blocks. We would like to use attributes in survey for more flexibilty. Is there a way you can scale using a style or description key via atributes?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I'm trying to create a new titleblock for a company I just started with that wants to make the move to AutoCAD. I have a couple of years drafting exp but I'm still learning the finer points of setting up a virgin system. So, I've drafted a titleblock which I'm trying to add attributes to, and I think I'm very close to having it all sorted out but I'm stuck at the moment. See below:
A breakdown of what I've done: Created title block and added attributes for all values we'll be taking from sheet sets (i.e. client name, revision numbers, revision dates}. This titleblock is saved as its own drawing and the attributes are in that drawing. The attributes have tags only- no default data or prompts Created a "Dummy" sheet set with all custom properties needed for future sheet sets/projects (i.e. client name, revision numbers, revision dates. Created a New Drawing using the sheet set manager, with our company's current drawing template.Purged all old title blocks from the new drawing Inserted the new title block (Bullet point 1) with attributes into layout 1.When prompted, I inserted the field for each corresponding attribute.
At first everything looked fine. Sheet number was correct, sheet title was correct, even a couple of the custom properties were alright and displaying properly in the layout. BUT THEN I noticed that a few attributes weren't showing up at all in the layout. When I would edit the title block itself, all of the attributes would be there but when I would try to insert a field into their 'default' parameters, the 'custom sheet set' properties wouldn't exist (like this sheet was not associated with this sheet set). But some of the attributes in the block WOULD be able to reference the custom sheet set properties, so that's not the issue.
My issues are inconsistent. Some attributes work, some don't, some update according to sheet set properties in the layout, others change in the block editor.
Is all of this weirdness being caused by the fact that my attributes are within a block? And does that mean that I have to define attributes in the Drawing template instead?
I got this plan from a third person and, the point from the survey have the property " bloc ". In their attribute property, I can see the elevation value. but in the z of the actual bloc, it shows zero. I would like to tell C3D to use the attribute elevation for his actual Z in the drawing. How can I achieve this ?
View 6 Replies View RelatedI'm further developing our template and would lke to know how much trouble it would be (if any) to be prompted for several block attributes upon a new file being created (QNEW). The information in these blocks is found throughout the .dwg file and I'd like to reduce the amount of time going through each instance to modify (something that should have been done a long time ago).
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
My Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
What I need to know is, will the drawing sheets/titleblocks attributes etc, I have created to insert in AutoCAD work in Civils 3d or will i need to create separate ones.
View 4 Replies View RelatedMy Quick Properties does not show my block attributes but they shows in Properties Palette. I have edit Quick Properties in my Custom.CUI that overrides ACAD.CUI settings. I'm using AutoCAD Civil 3D as AutoCAD 2012.
Below you can see that Attributes are not any option.
I'm trying to make my changes in the local CUI file.
how to make make block attributes text visible next to my blocks?
View 4 Replies View RelatedIs it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
Is there a way to change the default attributes "POINT, ELEV, DESC" to a different setup/style? (E.G., the point label style from the point which the block originated from?).
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
2014. In help, it says to "Click Insert tab-Block Definition panel-Manage Attributes" In my display, when clicking the Insert tab, I only have a "Block" panel, not a "Block Definition" panel. Trying to get to the Sync command.
View 2 Replies View RelatedFrom the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
I am trying to write a tool using the .NET API (C#) that will allow me to select a block that currently exists in the drawing, and then select a line, and the tool would calculate the necessary axis of rotation and the amount of rotation to rotate the block into the same orientation as the line. Both the block and the line might be skewed in 3 dimensions. The use case for a tool like this might be for drawing a tubular space frame. I would first define nodes and center lines for the frame, and then have a block of a standard structural member. I want to insert that member multiple times and "snap" it to a center line. I tried using Alignment Parameters.
However, these don't seem to work in all cases. I need to (or rather, SHOULD be able to) create a tool that allows me to re-align an existing block currently inserted into the drawing into a new orientation in 3D using any arbitrary line as a reference line. Clearly this can be done because it is done all the time in Inventor. A similar feature seems to not exist in Autocad.
In order to do this I believe I need to choose some vector to use as a reference within the block. For example, I might choose the BlockReference.BlockTransform.CoordinateSystem3d.Xaxis, and then rotate this vector so that it is equal to whatever reference line I have chosen. The problem I am encountering (and that I think many have encountered) is in understanding how to use the BlockTransform correctly to arrive at the points I need to do the necessary vector calculations to determine the axis of rotation and the degree of rotation such that I can call the BlockReference.TransformBy() method correctly and reliably.
Many posts say to "Use BlockTransform" but then don't go into any detail. There seem to me many pitfalls around when one can use the BlockTransform matrix, and on which objects, and what the results are likely to be based on one's current UCS etc.
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
with the new civil 3d 2013 i would like to show my hydrants in profile and section as well as drive thru's .... same with more parts then what they give us "out of the box"...multi view block of a hydrant?
View 5 Replies View RelatedI have been working with dynamic blocks - windows and doors - and I have trouble getting them into the right orientation and keeping them there.
My major problem is that when I try to move the hinge of the door to the door jamb the block orients itself any way it wants to go.
I can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?