AutoCAD Architecture :: Synchronizing Sheet View Layers To Match View
Sep 21, 2011
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
View 2 Replies
ADVERTISEMENT
Aug 11, 2012
How can I get dimensions and stair well in view to show in sheet view? Basement & 1st fl are ok but 2nd floor is not.
See attached screen shot.
View 2 Replies
View Related
May 14, 2013
Let’s say you have a large building plan in model space but there is only one small area of the building that the view port is looking at. Is there a way that you can draw around that viewport and then take that into model space and paste it in the same place so now you have the same area located in both views?
At the moment I need to try and work out where the view is by drawing a rectangle around the correct area of the building and this is time consuming.
I could then trim/delete everything else outside that box.
View 4 Replies
View Related
Aug 8, 2012
How can I remove a view from a sheet the only option seems to be rename and renumber in version 2012?
View 3 Replies
View Related
Jun 11, 2013
When I create a model space view; then drag it on the sheet; shouldn't they be linked? I mean if I go into the View drawing, move the drawing in question, then update the model space view, shouldn't that update the sheet view automatically? Theoretically speaking of course; we are talking AutoCad.
View 2 Replies
View Related
Jul 9, 2012
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
View 2 Replies
View Related
May 10, 2012
Since I installed autocad architecture 2012 I have this problem. When I drag a view from the project navigator in a sheet I see the content and the option to set a scale. So far so good. When I click in the sheet to set the location the viewport goes empty. I can stretch the viewport to top left to get the drawing within range and then move it back to where I want to place the drawing.
View 5 Replies
View Related
Apr 11, 2013
The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec.
View 3 Replies
View Related
Oct 27, 2011
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
View 5 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related
Jun 23, 2013
In the AutoCAD layout, the View port cannot always be linked to the drawing view. How will the viewport is linked to the drawing view.
View 1 Replies
View Related
Mar 26, 2012
i draw up all of my walls, i connect them properly, cleanup etc. then i want to trim them with my roof slabs and what i see? i see my walls suddenly dissappear in 3d view but are still correctly shown on plan view? i know it has something to do with roofline because when i tried to project them automatically to ontu my roof slabs the walls dissappeared too!
View 1 Replies
View Related
Nov 17, 2013
I've been using AuroCAD long time ago back in school, and then I moved out to bentlye's microstation after I started working for Jacobs Eng. and now I have to get back to AutoCAD again. My question is how to get the revcloud and text and the revision diamond… and everything to be match with the drawing's size? coz we have stranded in microstation, that’s give you the right size for everything according to the sheet scale.
View 1 Replies
View Related
Nov 11, 2011
New to AutoCAD. Designing a building in plan. Then used the plan to draw a section in new layer, but still in plan view. Is there a way to copy that section onto a new layer in front view and erase the old section layer? .
View 1 Replies
View Related
Feb 10, 2013
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
View 7 Replies
View Related
Mar 8, 2012
Trying to make a rotateable block with non-rotating text (i.e. full-time "match orientation to view" text).
C3D2010
Win 7
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 6 Replies
View Related
May 22, 2012
How can you dview / twist to get the view twist angle to match a line exact?
I can enter an angle but the angle of my line is not to an exact degree or degree decimal. 2013 Civil 3D
View 7 Replies
View Related
Apr 11, 2013
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
View 5 Replies
View Related
May 29, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
View 2 Replies
View Related
May 28, 2013
I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
View 6 Replies
View Related
Mar 20, 2013
After a support call, I've lowered the brightness on my imac OS 10.6.8 but the prints are darker than ever.
I've calibrated. The printer is an Epson 4900. Photoshop is managing the colors. I did not download the no color management app.
View 7 Replies
View Related
Apr 14, 2013
I've noticed recently that when I use the EXPORT command to create a JPEG, the resulting image colors of the EXPORTed JPEG are deeper (certainly more saturated) and the contrast over the entire image is much higher. The image looks nothing like what it looks like in GIMP prior to export.
I've tried EXPORTing to TIFF and I get the same results (JPEG looks exactly like the TIFF, just a different file size). Is it a possible ICC Profile mismatch (i.g. not having one set specifically inside GIMP)?
View 3 Replies
View Related
Mar 7, 2014
I'm trying to color match two shots and I'd like to be able to view them side by side while I adjust the colors in one of the shots. It seems like a good way to do this would be to view two program monitors side by side - but is that possible? I can't see that option anywhere.
Using the source monitor for comparison doesn't make sense to me as I've already color corrected the reference shot and the source monitor shows the original footage (ie. the wrong colors). I could of course try to match the shots based on the source footage of the reference shot and then apply a second color correction but that seems a bit unnecessary to me.
Or - I remember that in FCP7 there is an option to use split screen while color correcting two view two shots simulatenously side by side in the same screen/monitor. Is there anything like that hidden in PPro?
View 4 Replies
View Related
Jul 5, 2013
In ACLT14, where is the option to add new view windows on a sheet? It appears to be either missing or greyed out on my screen.
View 2 Replies
View Related
Jan 24, 2014
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies
View Related
Aug 15, 2011
I already set up the dst file, but doing this I have just set the dwgs that will be in the sheet list tag. How to set the dwgs that goes into the sheet view and model view? I know that you can have different folders there and organize your dwg files as details, elevations etc.
View 2 Replies
View Related
Jun 23, 2013
I am generating a drawing file in inventor.its having lot of sections and projected views. Its not able to accommodate all the views in one sheet. So my plan is to move the section views to second sheet or third sheet but section cutting line has to be in first sheet plan view.
I have seen drawing generated in inventor in same way but don't know how to do it.......
Inventor Professional Suite 2010
Windows 7
View 9 Replies
View Related
May 14, 2010
How can I move a detail view to another sheet in a drawing in 2009? I have only been able to copy the detail and it's parent view to the 2nd sheet and then suppress the parent view on the 2nd sheet so that only the detail view is visible.
However, when I go back to the first sheet and try to suppress or delete the detail view, it also deletes / suppresses the detail circle from the parent view.
View 5 Replies
View Related
Feb 1, 2007
How can I scale a view or all views in a sheet thru VB?I searched in the forum but I failed.
View 4 Replies
View Related
Jan 3, 2013
I'm pretty sure there's a way to do this but I am not sure on what code to use. I would like to have the "number" field on my title block template always get the "part number" attribute from the first base view (or first part/assembly) on sheet 1. This will be regardless of what sheet I am using the title block on. I could even store it as a custom property or something as I won't ever have two different part numbers in one drawing.
To clarify on that, we may have a welded assembly that has one single part number, but as I'm designing it, I just add a -1, -2, etc. to the end of the part number for each component being made. In the end when they're all welded together, it's one part number. Since no one else needs to see my -1, -2 etc, I'd like it to pull the part number from the assembly on sheet 1 for every sheet.
View 2 Replies
View Related
Apr 24, 2012
I creating plan and sections from my model. I went through my Create View Frames, and created my sheets fine. But one thing I cannot seem to fix, I am starting from Sheet 10, not sheet 1, so I need my match line to start at sheet 10, then up from there. Whats the setting I need to change for this? I have set all counters to start from 10, but the first match line still says sheet 1 i have attached an image of the matchline.
View 6 Replies
View Related
