AutoCAD Architecture :: How To Match Text And Symbols With Sheet Scale
Nov 17, 2013
I've been using AuroCAD long time ago back in school, and then I moved out to bentlye's microstation after I started working for Jacobs Eng. and now I have to get back to AutoCAD again. My question is how to get the revcloud and text and the revision diamond… and everything to be match with the drawing's size? coz we have stranded in microstation, that’s give you the right size for everything according to the sheet scale.
I have never gotten this to work, but had put little effort into it until recently. Thus far I have checked my project standards to make sure "match sheet views to view" is checked to "yes".
In both View drawing and the sheet- VISRETAIN is set to 1.
the VPLAYEROVERRIDESMODE is set to 1
I am working on drawings that are in my current project through project navigator. I am using ACA 2010 and not sure what else I need to do. I turn off all the unwanted layers in the view drawing, then create a sheet and xref in the view to model space- all the layers reset, and I again have to turn off all the unwanted layers. If I change a layer color in the view drawing, it does not change in the sheet drawing upon save and refresh.
I hate wasting time repeating the same task over and over....
Often when I attempt to insert a sheet list from the project navigator to a sheet, nothing happens. The sheet index will not insert. Why does this happen? Better yet, how can I fix it?
I have a dwg template that has a Multileader Style that uses Annotative text. When I changed a viewport to a different scale....from 1"=1' to 3/4" =1', the text is not appearing to scale. It's very large. The Mtext changed to the correct scale but not the Multileader text. Where do I need to make a change?
i have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
I am using ACA 2012 and when I insert a view into a sheet, the text and dimensions in the view do not display. I have checked the view and the text and dimensions are on layers that should display in the sheet. The layers are on and thawed in the viewport on the sheet, but do not show up. I have turned on all layers and only the model (building information) shows, no text or dimensions.
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
why i can't not match properties (MP) multileader texts, as you can see on the pic, i want the Mleader text on the right to be the same size as on the left, they are in the same layer, same mleader style but when click MP to match with the one on the left, nothing happen?
I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
I'm wondering if there's a way in AutoCAD Map 3d 2010 to bring in a points shape file and display it along a pipeline but not have the symbols overlap...I see where it automatically has conflict detection for the labeled features I bring in, but somehow want to have control over how the symbols are display on the alignment sheet. Is there a way to stairstep or offset two symbols that overlap or land on top of each other. I have several datasets like metal loss and growth rate I need to show but can't get the data not to overlap...I could do a larger scale but would just end up with tons of sheets.
I have a floor plan with a very long footprint in a "View" drawn at a convenient scale.
The long building had to be broken to be put on several different "Sheets", and each of the floor plans on each of the sheet has a scale. When I change the scale of the partial plan on one "Sheet", all the other sheets also change to the same scale and also the original view changes to the new scale.
Is there a way to assign the desired scale of the plan on one sheet without affecting the scale on the other sheets and on the original drawing view?
I am attempting to use the Weld symbols routine from the detail palette. All the symbols are being created an enormous size. how to reduce this insert scale.
I´m designing a sheet, but I've been running into some issues. First of all, I have some symbols on my view to describe some elements. I've been trying to add them to the sheet in a description table but I can´t copy them...is this possible or I would have to draw them again. Here is where I ran into another issue, cause those symbols are made with some styles of line that are not uploaded on my sheet, I went to Manage -> Additional Settings -> Line Styles and defined the new lines, but when I draw'em I can´t choose the new style, only the ones previously uploaded..
The crux of the matter is that the CANNOSCALE value needs to match an existing named scale. This lisp is part of a bigger lisp and I need to pass a variable into it. Here's what I have:
We've just upgraded to AutoCAD Architecture 2012 and I discovered that my match properties command (MA) is now on steroids. In the process of making an existing plan into a demo plan, I put a toilet on a demo layer. I intended to use match properties to put other select items on the same demo layer, but when I touched the lavatory, it turned into a toilet. I've never had this happen before. In trying to solve the issue, I've discovered the same thing happens with other AEC objects (couches, urnials, chairs -- all became toilets) and it happens in multiple files. Only walls and doors remain intact with only the layer, color and linetype changing (which is what I was expecting).
I looked at the settings inside the match properties command and none of them seemed to apply. I deselected the special properties options anyway, but the problem remains.
i would like to rotate an object to match the angle of another. I can measure the angle but there are many decimal points and I want it to be exact.
One method i have employed is to change the ucs - z setting to align with the object to be rotated then click it and select a point that intersects the other object (this case a line) and then the 2nd snap is somewhere along the line.
this works although sometimes i have to rotate a second time 90 deg. or 180 to get proper orientation.
When I use the rip commandment a message appears " for proper folding the model should have uniform thickness equal to the model parameter thickness. Please set the proper thickness in the sheet metal styles to match your model".
Im working for a geological firm that use timescales to describe their work (depths at times etc). I need to compress the time bar but not alter the text but cant find way to do it. Im only scaling in 1 direction.
I am using AutoCAD 2013 and I working on a project of approxamitely 80 pages and I have a Sheet Set Manager set up.There are about 40 pages that have text saying Continuation on Sheet XX of YY. I managed to use a field for the total count (YY) however I need to link the XX to the another drawing. I have researched and failed miserably.
I am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
I have over a 100pg plan set and have changed page numbers and added more drawings and deleted a few. so now we have to go through the entire Table of Contents and drawings and renumber everything. Is there a way to link the fields in the Table of Contents with the page numbers on the drawings?
I have a subdivided plane that I wish to scale horizontally to match another objects dimensions. In cinema 4d I can check an objects width and then just put that number into the other object width input.
I'm trying to scale a pattern to fit the entire canvas without tiling it over the whole layer. To try to do this, I made a rectangular selection box, then dragged and dropped a pattern into the box. This created a new layer called "clipboard". I right clicked the clipboard layer, then left clicked "Scale Layer". Then I entered a width and height in pixels that matched the size of the canvas. The selection does expand, but it doesn't fill the entire canvas.
