AutoCAD Architecture :: Annotation Without Annotative - Scale Text From Tool Palette
Apr 5, 2012
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies
ADVERTISEMENT
Aug 8, 2007
I seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
View 9 Replies
View Related
Sep 19, 2012
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies
View Related
Mar 13, 2013
Annotative block moves when annotation scale changed,
The solution for this problem is mentioned in the link below but sounds not to be useful:
[URL]....
I got a block that contains an attribute (attached) and created on layer zero while the current annotation scale is 1:100. As this annotation scale is changed (say to 1:200 or 1:50) this block moves from its original place to another one (as shown in the attached screenshots).
View 2 Replies
View Related
Mar 29, 2011
I have a Viewport set to scale 1:100 and the Viewport is locked.The Annotation Scale displayed in the Viewport was 1:50.
When I clicked on the Synchronize Icon beside the Viewport Scale, the Viewport Scale changed, even though the Viewport was locked.
I was expecting the Annotation Scale to synchronize to the Viewport Scale.
Is this how it is supposed to work? and why does a locked Viewport Scale change?
View 2 Replies
View Related
Sep 18, 2013
My question has to do with the Annotation Tool Palette out-of-the-box. For a given scale, the Call out bubble circle and text is a different size from the Section call out. See attached image.
View 2 Replies
View Related
Mar 23, 2012
I have 2 computers with Windows 7 OS and 2011 ACA installed with a custom profile set current. When I select annotative text, right click and select ADD/DELETE SCALE, the Annotation Scale dialog
box SHOULD open.... but it does not. I have this same profile set on other computers with Windows 7 and they are working fine. We have completely uninstalled ACA, wiped the registry clean, and reinstalled...
it's still doing the same thing. I can switch to the Out of the Box profile and the dialog box opens as it should. I'm not sure where to look within the profile for the issue since it's working on other computers.
View 3 Replies
View Related
Jul 17, 2013
For some reason, the tool palette I usually use is not accessible. I opened a drawing that a co-worker was using and my tool palette now looks like an old version - it doesn't have any of my custom tools in it. How do I get back my tool palette??
View 1 Replies
View Related
Sep 24, 2012
Multileader Style that is Annotative, and once it gets drag/dropped on a Tool Palette, the Annotative aspect of the style no longer is enabled when it's activated through the Tool Palette on a fresh drawing? I've looked through all the System Variables related to the Annotative family (that I can think of) and still I'm not seeing the results that I want.
I can insert these into our Client Specific Template for our internal stuff, but we kick off new jobs all the time by producing a quick "test fit" for our client.
These Tool Palettes are networked on an enterprise level so it would be a real bummer if we can't get it to work.
View 3 Replies
View Related
May 1, 2012
Noticed that the Dynamic Blocks in the Annotation Tool Palette are missing? Let me rephrase that, in the Tool palette they show up, but the dwg's that they reference are missing. I have 4 users that are currently testing Civil 3D 2013 and all of them are missing the files.
I'm sure I could copy them from 2012, but still.
View 3 Replies
View Related
Sep 15, 2011
I have a sample piece of annotative text that I dragged and dropped onto my tool palette. It works perfectly fine in the file I dragged and dropped from, but not in any other file. When I insert in into another file, the text is no longer annotative. I gave the text style a unique name in the file I dragged and dropped from.
View 2 Replies
View Related
Mar 16, 2012
I have successfully created one drawing using annotative dims and text - I have set my text to 1:1 scale, height = 30 in paperspace (although I don't get what this refers to when it automatically says it's 30 in modelspace too) and my viewport is 1:20 scale. It's all good, the dims and text look great, which is what I want at the end of the day, however I got there.
But, when I want to set up another detail at 1:40 scale, I can't for the life of me figure out how to make the same dim and text style appear the same size as it was for the 1:20 detail.
View 9 Replies
View Related
Jun 9, 2011
In ACA 2009 I could, after saving the drawing, click on a wall, window etc and drag it to the tool palette to create a new tool.
In ACA 2011 this only works for lines/polylines. Plus the wall, door and window palettes are gone. How can I retreave them?
View 1 Replies
View Related
Aug 15, 2013
I have a drawing that contains texts that are annotative. But I would like to change the scale of the drawing with the floating model space viewport in Paper Space. I know I can individually right click on the text and Add Current Scale to them but is there a way to do so globally?
View 1 Replies
View Related
Jan 4, 2013
I have a base plan. The text scale is set to 1"=40' I xref the base plan into a strucural bridge plan sheet and scale the base map x 12 so that i can work in architetural scale. How do I get the text to scale correctly in the xref'd base map that has been scaled by 12 for a 1/8" scale?
View 3 Replies
View Related
Jul 30, 2012
Im pretty new to annotative text. I was wondering how I can make text show in two viewports at two diffrent scales? Also how to I remove scales from text?
View 2 Replies
View Related
Oct 23, 2010
When I change the annotation scale for selected text and leaders, most of it shoots into space. I have tried one at a time and many, all with the same result.
The text size looks correct, the leader looks fine, but the text x coordinate changes radically.
Changing from 1:1 to 1:15,000
Does this mean I have to relocate every leader text back to something normal, or am I missing something.
View 3 Replies
View Related
Jul 14, 2011
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies
View Related
Sep 10, 2013
My annotative text moves from its original place when I change my viewport scale. I tried to add the PS scale to my original xref, but when I click on the text, I can't change the "no" to "yes" on the options menu where it says annotative.
View 2 Replies
View Related
Aug 16, 2012
I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
View 5 Replies
View Related
Mar 12, 2012
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies
View Related
Aug 23, 2013
Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
View 2 Replies
View Related
May 16, 2012
I can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".
View 1 Replies
View Related
Mar 15, 2012
Where is the “annotative scale” and “paper text height” properties?
I couldn’t find the “annotative scale” and “paper text height” properties when dealing with “Civil 3D” objects such as points and contours the same way we have it in the regular AutoCAD.
For example, suppose that I need to increase to decrease the “text height” of the point label considering a particular “annotative scale” property, then how this kind of thing might be done in the AutoCAD Civil 3D?
View 4 Replies
View Related
May 29, 2012
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies
View Related
Apr 25, 2013
I am currently using Autocad 2014 and I am attempting to insert a dynamic block from a tool palette. I would like to click on a dynamic block in the tool palette and have it prompt for the (uniform) scale. It seems simple enough but either all the dynamic properties are lost or it is inserted at 1"x1" (the scale of my original block). How to get this to work?
View 3 Replies
View Related
Aug 2, 2012
I'm trying to set up Annotative Text styles in my Xref base drawing, so that I can alter the Annotative Text Scale in paperspace of my titlesheet drawings.
Is it possible to create the Annotative Text styles in an xref and amend these on a titlesheet when said xref has been imported?
I've checked the "Help" section of AutoCad but it all seems to relate to creating Annotative Styles within a single drawing.
View 3 Replies
View Related
Oct 16, 2013
Just upgraded to 2014. I have a custom tool palette set up and Content Browser pointing to right catalog. Custom tool palette was copied from 2012. I was able to modify all tool properties within that palette to point to right content file but one. Can't change the property in one tool on palette.
Patette is locked (I locked it when I created it in 2012) and I have Right Access to all of the network files in Architecture (this is sitting on a network). Why is it the Tool Palette won't Unlock?
View 2 Replies
View Related
Aug 1, 2012
I am running 2011 ACA on Win 7 64bit.Today when I launch the program, the contents of the tool palette are incorrect. None of the "door, wall, spaces ff+e, etc...) are there anymore.
View 9 Replies
View Related
Oct 10, 2011
I have set the properties in Content Browser for New Project 2012 (our template for new projects) under Tool Palettes for shared workspace catalog; tool palette group is pointing to Workspace Catalog on a shared drive; tool content root path is pointing to a Projects folder called New Project 2012.
When I open the project New Project 2012 the tool palettes come up but with a Tool Palette Group called New Project 2012 with all the tool palettes listed under it. I right clicked and made the Design group the current group and selected Customize Palettes. I can see under Palette Groups - New Project 2012. I right clicked and selected delete and it's gone but when I go out of the project and go back in, the group New Project 2012 is there. Where do I go to delete this group? Where do I tell the Project to have the Design Group be current when opening this Project?
View 3 Replies
View Related
Mar 10, 2013
I am new to ACA and was trying to use the massing element from either the build ribbon on home page or design tool palette. I select the icon and then right click the properties box and all the dimension boxes are gray not letting me input data. I cannot find out how to change them to be editable.
View 3 Replies
View Related
