Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
View 2 RepliesI have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedI know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies View RelatedI can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".
View 1 Replies View RelatedI am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedUnfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies View RelatedI'm trying to set up Annotative Text styles in my Xref base drawing, so that I can alter the Annotative Text Scale in paperspace of my titlesheet drawings.
Is it possible to create the Annotative Text styles in an xref and amend these on a titlesheet when said xref has been imported?
I've checked the "Help" section of AutoCad but it all seems to relate to creating Annotative Styles within a single drawing.
I have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedI've completed my drawing (Autocad architectural 2012) and set-up my multiple view-ports (at 1:50 and 1:5 scale) on my title-block.
I'm now going to add my text and dimensions im model space....and that's when the problems start!
I've created text and dimensions in annotative style.
The issue I have is when I change annotation scale from 1:50 to 1:5 my text and dimensions in model space automatically changes (as can be seen on attachment) to a huge scale but is perfect in layout view for differing scales.
I have a dwg with 40 blocks that have a non-annotative property. I can go through 1 by 1 and change the property to annotative and redefine the block. Is it possible to automate this? I have done some google searches but have not found anything I am able to cut and paste or put together to get it to work.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I am ACA 2013. I received a file from an equipment company and has these blocks that are huge in file size, so I am cleaning things up on them. Their blocks have multiple layers in them with different colors and linetypes. I see the setbylayer command and it works, but not all the time. On some of the blocks, they have attribute text in them. the individual lines of the attribute are on different layers. I want to keep the info, but set all to layer 0. then I can move it to the block to the layer I want.
another question, is there a way to make an outline of a block? Some of these blocks are so detailed that I want to make a simple outline and then delete the block.
Attached is a dynamic block of a smoke/c.o. detector. I have a few of these on a floor plan and at times the entire floor plan needs to be mirrored. I would like the text itself to mirror as well so I don't have to select each dynamic block and mirror it again to read correctly.
I have mirrtext set to 0. I have read that creating attributes will solve this problem however I have created attributes in the dynamic block and I still cannot get it to read correctly when mirrored.
There I have an issue trying to show the text I include on a structure steel members. On model space you can see and print that info. But if I go to paper space and put the drawing on a view port the text disappears? See attached. Just jump from model to work (paper space) and you will see what I am talking about.
View 3 Replies View Relatedi used autocad 2010 and when i create a new block and rotate in that block text hhave been changed by cad.
is there any option to create block and never changed text when did mirror or rotate.
When hovering my pointer over an annotative object, the annotative symbol does not appear. This works on my other computers but not this one. Is it a setting somewhere or is it a problem with the install? I don't remember if it ever worked correctly or stopped working at some point in my learning process on ACA 2011 over the last 6 mos.
View 1 Replies View RelatedThere are obvious reasons to limit the number of annotative scales while your drafting. I don't know that I'm aware of what file errors/issues can come about from using annotative scales. I've read where you should clean up the scales in your drawing but I'm not sure why?
View 2 Replies View RelatedI have created an annotative block. This block is displayed in a few different viewports at different scales. After I create the block I go and check the viewports and it is displaying well. The linework (polylines and a circle) is annotative as is the text in the block.
However, if I then change the scale/annotative scale of a viewport, the block doesn't seem to update properly. The text within the block updates to the new size although the linework within the block doesn't seem to scale and resets back to the model space size.
I've tried regenning etc with no luck. Is there a command I need to use after changing a viewport scale to force annotative blocks to update?
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I seem to be running into a wall here, I have created an annotative dimension and copied it to the tool palette. When I go to dimension something in a new dwg that does not have the new annotation style, the dimension style does not keep its annotation setting. It brings in the annotation style but not the annotation setting.
View 9 Replies View RelatedI have a drawing with a dynamic annotative block. I want to export that block to another (new) drawing (similar as AutoCAD's wblock command). But whatever I try, I never get the block as a drawing, but always end up with a drawing containing the block.
Some of the things I tried:
i.e. 1:
structObjectId = objBlockTable[strBlockName];
objBlockTableRecord = (BlockTableRecord)objTransaction.GetObject(structObjectId, OpenMode.ForRead);
[Code].....
I have a dynamic block that I created with a bunch of visibility, rotate and stretch parameters and actions. When I created said block, I meant to make it annotative but forgot about it during the initial block definition. Is there a way that I can make the block annotative now, or do I have to go back and re make the block all over again?
View 4 Replies View Relatedhow to work with anno text and dims, but I need to create an annotative, dynamic block.
View 9 Replies View RelatedRunning AutoCAD 2011 Full
What the Issue is; I'm trying to field text from my "station number" block (which is Annotative) to my schedule. It will link at first but when I close the drawing and re-open the same drawing somehow the links/field between the "station number" and schedule break. Works fine if the block is non Annotative??
I'm setting up CAD standards for my office (title blocks, tool palletes, dynamic blocks, you know the drill). This should have been done long ago by another employee who makes more money than me, but that is beside the point. (Maybe you know the drill on that front too...)
This is a granite counter top fabrication shop, and I've created a dynamic block containing all the edging profiles we are producing at the moment. Contained in the block are "3D" versions of each profile, both with and without dimensions (for annotation purposes), and a 2D closed polyline showing only the "section" of the profile, to be exploded from the block and used as an extrusion shape when 3D drawings of the finished look of a countertop are necessary.
The issue I'm having is with scaling/annotative scaling. I have created a custom tool pallete with this edge profile block and a couple other dynamic "mark-up" blocks. (See Layout1 in the attached drawing.) What I need is for this edge profile block to insert into model space at "actual size" (3/4" thick), so when it is exploded and extruded, I'm creating that 3D edge at the proper proportion in my drawing. But for annotative purposes, I want to be able to insert the block at a different scale in paperspace (roughly at the size it is shown in the attached drawing).
CRYSTAL_TEPLATE01.dwg
I created an dynamic block few weeks ago and forgot to make it annotative. I try the ddchprop command, switch annotative to yes but it automatically immediately switch back to no.
View 2 Replies View RelatedIs it true that you can't attach an Annotative Block to a MultiLeader?This is the message that I got when trying: "Specify leader arrowhead location or [leader Landing first/Content
first/Options] <Options>: OP
Enter an option [Leader type/leader lAnding/Content type/Maxpoints/First
angle/Second angle/eXit options] <eXit options>: C
Select a content type [Block/Mtext/None] <Block>:
Enter block name <DOORTAG>: LEGENDNOTE
Invalid Input."
It's unfortunate because I would like the block to show up Annotative in my Legend, and then again to the proper scale with the Multi Leader
I want to create a block that has the level # on top of the little triangle thingy (yes, highly technical terms are in use), that will automatically resize BOTH the size of the text and the size of the triangle depending on which scale I'm in.
At the moment I can figure out how to make the TEXT (aka the #) annotative, but the triangle stays the same size no matter what scale I'm in. Not only that, but then the text doesn't stay consistently next to the triangle symbol when I change scales.
I want a block where BOTH the Text size for the level AND the triangle symbol itself will always be correct, regardless of what scale my viewport is in. Aka, I put a level symbol for +5.72 in the correct position in Model Space. In Paper Space, my 1:50 viewport and my 1:100 viewports are EACH showing the +5.72 triangle level sign, in the correct place, with the triangle and text being the correct size.
I have this block with attributes and I go into Block Editor and I can select Annotative Yes (ie it's not greyed out) but when the drop down closes up it stays on No. I ended up cutting and pasting into a different drawing, Block Edit, etc and saving back. But I'm still curious as to why it wouldn't let me put it to Yes.
View 9 Replies View RelatedI´m having problem with annotative multileaders. They work fine while I don't move the lead point. Once I change it, the annotative scale works just on the scale that I use to transform it. In any other scale, it returns to its original position.
View 3 Replies View Related