AutoCAD Architecture :: Set Up Annotative Text Styles In Xref Base Drawing
Aug 2, 2012
I'm trying to set up Annotative Text styles in my Xref base drawing, so that I can alter the Annotative Text Scale in paperspace of my titlesheet drawings.
Is it possible to create the Annotative Text styles in an xref and amend these on a titlesheet when said xref has been imported?
I've checked the "Help" section of AutoCad but it all seems to relate to creating Annotative Styles within a single drawing.
View 3 Replies
ADVERTISEMENT
Mar 12, 2012
When I want to establish a new annotative text style, and I'm in the Text Styles dialog box, in the "Size" box, why will it not let me enter a Paper Text Height of 3/32"??? Every time I try it defaults to either 1/16" or 1/8". I have checked the Annotative box.
View 2 Replies
View Related
Nov 28, 2012
I am trying to xref a base drawing. But everytime I insert the drawing, the scale factor always comes up to be 12. I tried changing it, but it won't let me. I have attached an image of the problem I am getting.
View 1 Replies
View Related
Jul 26, 2012
I have a base drawing with all my pipe networks data referenced in. When I xref this drawing into out drawings some of the pipe styles and structure styles are displaying differently than in the base file. Both drawings have same parts lists and styles.
View 8 Replies
View Related
Aug 2, 2013
I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies
View Related
Aug 15, 2012
I am running ACA 2011 X64.I have some leaders that I copied from one drawing into another drawing.
When copied the leaders do not display their attributes. I cannot seem to figure out how to do it. I have made sure they are both in the same annotative scale and that both have the current scales loaded.
View 1 Replies
View Related
Aug 16, 2012
I know it is a simple thing but for the life of me I cannot make it work. I must of hit a button and messed it up.
Annotative dims and text. I have multiple view ports ranging from 1/8 to 1-1/2 inch scale in one paper space. I have noted items (in model) and need them to appear in the different scaled VP's. However, too much is showing up. All scales in all vp's are active, not just the scale of the vp.
View 5 Replies
View Related
Aug 23, 2013
Why can I not check the Annotative Scale box for the attribute? Please see attached. The circle scales up and down but I only see the text in the 1/8" scale and but not in the 3/16" scale. The 3/16" scale is selected in the attributes scale box.
View 2 Replies
View Related
May 16, 2012
I can set up anno text to appear for instance at 1/8" scale, but cannot get it to change for every scale, and for it to remain centered on the original position at each change in scale. I know it's something to do with how I set it up but cannot find it in "Help".
View 1 Replies
View Related
Sep 19, 2012
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies
View Related
Apr 5, 2012
Unfortunately, a new project we have does not allow us to use annotative objects, so we are back to switching scale by creating several dimstyles with a varying dimscale (eg. Dim96, for 1/8", Dim48 for 1/4" etc.) Now I have created a button on the tool palette that brings in text and it allows me to set the size of the arrow by matching it to the dimstyle, but the text comes in always at the same size - 9" which is 3/32" for a 1/8" plan. The arrow changes but the text does not. I know I have to change the CANNOSCALE, but I can't seem to figure out a way of making it work so that the user will only need to switch the dimstyle from the pull down up at the top right and then be able to use a tool palette button that will bring in a text with leader with it's arrow head and text height matching the dimstyle scale.
View 4 Replies
View Related
Dec 11, 2013
I have a drawing done in AutoCAD Architecture 2013. Most of it is just lines, but I have a couple of Walls with Doors. It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared. The opening is there but no door.
I tried xredit and the doors are there but when I close that they are gone again. Tried detaching and reattaching...still have the problem.
After I posted this tried Display Configuration. Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.
View 1 Replies
View Related
Jul 8, 2013
When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
View 3 Replies
View Related
Oct 26, 2010
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.
View 7 Replies
View Related
Jul 26, 2012
When I set the background mask to "yes" for text or dims it does mask out the xref as long as I set the cursor on the text / dim. When I move the cursor off the text / dim, the xref reappears, so when I print, the text is illegible due to the background walls etc.
View 3 Replies
View Related
Aug 7, 2012
i have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
View 4 Replies
View Related
Dec 23, 2013
I'm new to this company and still learning the ropes on there standards and how they do things. I have a floor plan and when I was cleaning it up, I noticed some extraneous linetypes and text styles. Being the good drafter that I am, I tried to clean it up, but to no avail. I even tried to make a new file, but when I copy clipped it in, it brings in the extra linetypes and text styles. Ran audit, but didn't find anything unusual. I even deleted everything but can't seem to purge out the extra linetypes and text styles. How to remove them? see attached for the drawing file. running autocad architecture 2012 on windows 7 64 bit machine. and the files was originally created in revit, that was converted out.
View 9 Replies
View Related
Jul 14, 2011
I have a dynamic block that contains both geometry as well as text. I don't want the geometry to scale up based on the drawing scale but I do want the text to scle according to the drawing scale. I have tried making the text both annotative and non-annotative in the block and get the same result. I can get the text to scale properly if I make the entire block annotative but that also scales the geometry which is not accurate.
View 1 Replies
View Related
Jul 30, 2013
I would like to preface this post by stating, for the purposes of this message, that I have absolutely no understanding of the workings of AutoCAD. I have looked at many forum discussions concerning my issue and I am simply unable to understand the terminology and/or concepts being described.
I recently purchased a new computer for my office. Accordingly, I needed to install AutoCAD on this new machine. All of the machines in my office are running AutoCAD 2011. However, after addressing some licensing issues with AutoDesk, I received a license and installer for AutoCAD 2012. Everything was installed correctly (as far as I understand) and the program itself is working fine. The problem I am running into involves the text style for the files I open:
For files saved on AutoCAD 2011, the text style used is Arial. Simple; no custom fonts. However, when I open that same file in AutoCAD 2012, the text style for the entire file has changed to Franklin Gothic Book. (Note that all files are accessible from all computers in the office through a network drive)
That is my only understanding of the situation. As I mentioned earlier I have very little understanding of the workings of AutoCAD. I have had this problem for almost a week now and I am no closer to understand this issue, much less solving it.
View 6 Replies
View Related
May 29, 2012
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies
View Related
Sep 7, 2011
NOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
View 0 Replies
View Related
May 29, 2013
Any way to locate where text styles are located within a drawng. I am creating templates and some text styles are being carried from one template to another when I create them and I would like to delete certain text styles. I have looked around the drawing, but cannot seem to locate them.
View 9 Replies
View Related
May 16, 2012
I have a file I received from a consultant that has an annotative block in it. I've been trying to xref (attachment, not overlay) it into our files, and it's not showing up. I've got the affected layers on, the block units for both files are identical..
This block has editable attributes in it. The attribute is what is not showing up...the point, which is the other block component, displays correctly in the xref.
View 2 Replies
View Related
Jan 3, 2013
so in one drawing, the annotative scales of the objects are listed as 1" = 30' etc, and in the drawing i have them xref'ed into are 1:30. the only way i can get the annotative txt to show up is to make them non-annotative.
im assuming it has to do with the difference of 1:30 and 1" = 30'.
View 3 Replies
View Related
May 7, 2013
I am trying to XREF my C3D Design file that has my profiles and sections in it into a drawing with a title block and viewport. Everything is fine in Model Space...but when I create the viewport in Paper Space none of the annotative text of the profile/section shows up...or is microscopic.
View 8 Replies
View Related
Apr 26, 2012
When I purge a drawing, the text styles are not a selectable option (as if there are no purgeable text styles). if i use (-purge), it will purge the unused text styles. I can also go into the Styles dialog box and delete the styles. It happens in all drawings and nobody else in the dept has the problem. I can't find any settings that would exclude any items from the purge dialog box as well. Autocad 2012? windows 7 64 bit.
View 1 Replies
View Related
Nov 1, 2012
To simply put it, I am grabbing linework from a dwg and copying it from base point 0,0,0. in the drawing that I want to copy it into, I hit ctrl+v and type 0,0,0 to put it exactly where it needs to be.
For some reason, that I cannot figure out, the 0,0,0 point in the two drawings are different...so I have to zoom extents and hunt for it 10,000feet away in model space. But that is not the main problem because I can always find it and move it where it needs to be.
The main problem is that when I move the copied linework over the previous linework that needs updated, it has been rotated like 3 - 4 degrees. That, or my base file's linework has been rotated 3 - 4 degrees - which doesn;t make sense because my base files linework is made up of xref's!
All drawings are set to UCS World.
Is there a way to make the 0,0,0 points the same location in both my base file and all the xrefs? My base file is not completely vertical when the xref dwg is...is there a setting that my base file has for xref's that is rotating them 3 - 4 degrees?
View 1 Replies
View Related
Aug 30, 2012
I have inserted an XREF with annotative blocks. The blocks in the original drawing are 1:1. In the new drawing I want to plot the XREF at 1:250. How do I set the annotative scale to the blocks with out adding scales to the original drawing?
View 1 Replies
View Related
Nov 21, 2011
I have a wall that I want to be 34' in height. Right now the default is 9' so when I select the wall & go into Properties, I see under Dimensions where I can change the Height but I have to select two points. I'm unable to type in 34'. Same thing with the Length. Where do I say I want this one wall to be 34'?
View 2 Replies
View Related
Sep 8, 2011
When hovering my pointer over an annotative object, the annotative symbol does not appear. This works on my other computers but not this one. Is it a setting somewhere or is it a problem with the install? I don't remember if it ever worked correctly or stopped working at some point in my learning process on ACA 2011 over the last 6 mos.
View 1 Replies
View Related
Nov 13, 2012
There are obvious reasons to limit the number of annotative scales while your drafting. I don't know that I'm aware of what file errors/issues can come about from using annotative scales. I've read where you should clean up the scales in your drawing but I'm not sure why?
View 2 Replies
View Related
