When I set the background mask to "yes" for text or dims it does mask out the xref as long as I set the cursor on the text / dim. When I move the cursor off the text / dim, the xref reappears, so when I print, the text is illegible due to the background walls etc.
View 3 Repliesi have a structural xref drawing that has all the text 10"high. I xref (overlay) that drawing into another one, but that drawing is going to have a scale 1/4"=1'-0" is there a way to auto scale all the text in to xref to become 4" high?
a bit more information
the structural drawing that im xrefing in will be overlayed over my floorplans, then printed at the 1/4"=1'-0"
I need the structural base drawing to keep the 10" text height because some times i have to print off the entire structural plan separate.
I'm trying to set up Annotative Text styles in my Xref base drawing, so that I can alter the Annotative Text Scale in paperspace of my titlesheet drawings.
Is it possible to create the Annotative Text styles in an xref and amend these on a titlesheet when said xref has been imported?
I've checked the "Help" section of AutoCad but it all seems to relate to creating Annotative Styles within a single drawing.
I am new user in autocad 2010 and i used softly this software but untill i could not get how to work in xref and what is the major benefit of this link
View 5 Replies View RelatedUsing PN, I set up 2 levels. Level 1 at 0'-0", Level 2 at 10'-0". I create a Level 1 construct and create my AEC model. I then create my Level 2 construct and xref my Level 1 construct in to use as an underlay. However, using OOTB Medium display configuration I cannot see the Level 1 xref because the Level 2 cut plane is at 3'-6" and the Level 1 construct is 10'-0" below this cut plane. Is this the intended result?
To allow me to see my Level 1 xref in my Level 2 construct, I am required to override the global cut plane in my Level 1 construct and set my wall cut planes, for *each* wall style, to 3'-6". After saving the Level 1 construct, I reload in the Level 2 construct, and the walls appear, as an underlay, in the Level 2 construct as desired.
Is this the only way to see one xref above or below the other? Isnt one of the major advantages of using xrefs is as underlays for stacking levels?I dont have to override the global cut plane in all my wall styles.
ACA2011.I've got a construct that for some reason has 2 xrefs listed within it that I can't detach. It says that it is unresolved and when I try to detach it it says "c_Floor Plan - First" has multiple references, Not detached." This is one of two xrefs in the drawing doing this...how is it possible to have an xref of the same name in the drawing? I can't figure out how to detach it. It was causing problems in the view to which it was referenced, and I solved it by creating a bogus, blank construct called "test" and changed the path of the xref in the construct to this drawing...but I still can't detach it.
View 2 Replies View RelatedAll I want to do is trace on top of an x-ref elevation. The x ref hides all my new lines so I cannot see what I've just drawn. Even the display order has no effect, not that I want to use the display order every time I draw a line. I just want my new black lines to show up on top of the faded xref image.
View 4 Replies View RelatedWhen you double-click on xref within the viewport and refedit opens and allows you to edit xref, how do you exit refedit mode when finished? I can not find the ref edit icon menu on 2013 banner layout.
View 1 Replies View RelatedI am running Autocad 2012 and need information about how to add the PDF as a background (like an XREF) and be able snap to points on the PDF.
View 1 Replies View RelatedI use 2013. The xref pallet was docked but has disappeared. Also, when I type 'xref' at the command line, the xref dialog box does not appear. How do I get them back?
View 2 Replies View RelatedI have loaded an xref in to my working file. I temporarily unloaded the xref so that it would not be in the way as I was editing my drawing. Even though the xref is unloaded and I can not see it on screen it still highlights and becomes visible as if I picked it with my fence while I am trying to edit other entities to my drawing.
View 3 Replies View RelatedI have created room tags and would like to use the floor plan (with room names) as Xref. Is there a way I can locate the room names in one location per room on the main floor plan and then relocate the room names on the reflected ceiling plan and NOT move the room name on the main floor plan?
View 1 Replies View RelatedI am using Autocad LT 2013 and Autocad Architecture withing the same office. When I open a file that has an Xref from Autocad Architecture with 3D walls in Autocad LT, the walls only show as 1 line instead of 2. If I open the orginal file that the Xref came from, with Autocad LT the walls show up just fine (as blocks instead of 3d walls as I expected). I am hoping to be able to veiw the Xrefs correctly in Autocad LT.
View 7 Replies View Relatedis this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies View RelatedI cannot xref a construct into a view dwg using PN. I get error "Could not reference file <construct> in <view>. Same problem whether I use relative or full pathing. But I can manually attach the construct using the XREF command. So I know it is not a file/folder permissions problem. What's annoying is that I did get it to work with one construct but not another.
I am using ACA 2013 and I see that there is a service pack 2 update.
I'm getting very long run times to edit x refs in place. Once the exref drawing opens, sometimes after 2 or three minutes, and I make my edit, It can take ten minuted to close the xref.
Drawing are clean, purged, -purged, recovered audited. Computer is new workstation and dedicated to CAD only. Very little opportunity for corrupted files.
We have just started to use Autocad Architecture 2012 however when we add an xref we get a location insertion position error.
The original drawing xref is created at 0,0,0 and the drawing we are referencing into is also created with the same points. If we paste a point from 0,0,0 to the original co-ordinates it looks fine. However when we add the xref to another file the xref seems to come in at insertion point x 70484.84995973 and insertion point y 16146.53159634
Is there any way of sorting this out as we would like to use 0,0,0 as the xref insertion point?
I have a drawing done in AutoCAD Architecture 2013. Most of it is just lines, but I have a couple of Walls with Doors. It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared. The opening is there but no door.
I tried xredit and the doors are there but when I close that they are gone again. Tried detaching and reattaching...still have the problem.
After I posted this tried Display Configuration. Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.
The way it looks I should be able to edit the propertyset data though an XRef... but all the properties are grayed out. I thought it was because I also had the XRef open... so I closed it. Still the same result.
The discription says "Edit property set data in the current drawing or through external references. Add or Remove property sets."
Am I not understanding the tool - or what?
problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
I'm using AutoCAD Architecture 2009. I xref a lot of floor plans underneath my new floor plans to trace different walls, roof outlines etc and ever since I started using the smart walls this has become a real pain. When I xref in a demo floor plan for example underneath my new remodeled plan the walls from the xref interact with the new walls and of course bring up all the error triangles.Is there a way to make the xref not interact with the plan that it is being place under?
View 3 Replies View RelatedI have a drawing containg wall elements that is referenced into a whole bunch of other drawings (roughly a hundret).
In the wall-drawing i recently set the walls color to "by layer" via the display properties in style manager.
Unfortunately they keep their old color in the other files. I tried visretain and it didn't do the trick.
In my xref drawing I changed the linetype of a swing to be hidden. After changing it in the xref and saving I go to my plot file and the swing is still continuous. Visretain is set to 1. The swing changes on all other drawing files except one.
View 2 Replies View RelatedIs there any options for Xref files and/or attributes to screen down or fade down other than changing its color to gray?
View 4 Replies View RelatedI am developing an simulation application, leveraging on using Space objects and applied additional Property Set Definitions for Space objects where I introduced a new Property "Value".
I applied a display theme to my DWG, and based on the value of the Property, different colors will be displayed according to the display theme.
For a single DWG file containing the building, I am able to simulate the color changes by updating the “Value” Property in the Spaces using .NET APIs functions such as PropertySet.SetAt, and committing the transaction.
However, one building can consist of many different levels, and I have split up the modeling of the building into its separate levels. For example, a 3 storey building, I will have 3 DWG files for each individual levels.
A main empty DWG was then used to XREF the 3 levels, to combine the different levels into a whole building. I would like to simulate such colour change through the main DWG which references my individual level DWGs.
what .NET API I can use to access the XREF DWGs in my main DWG, so that I can update the "Value" property in all my Space objects?
When I attempt to load xref the dialogue for file attachment does not appear. This has only started happening the past day or so. The same applies to image files etc.
View 2 Replies View RelatedWhen I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
When I have a drawing open in AutoCAD LT 2012 any xrefs are very dull or perhaps dark is a better description and on a black background tend to be very difficult to see. Is there a setting somewhere I can change to brighten up the xref?
View 1 Replies View RelatedWe've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
I have a few problems with my autoCAD 2010 version on my new computer.When I make a few hatches, there is a possibility that my entire computer freezes and the only way out is a hard shut down of my computer.
The same problem also appeared when I tried to open a drawing direct in autoCAD or when I search the file to make an exref into the drawing.