AutoCAD Architecture :: Paper Space Schedule Tag An Object Nested Inside Xref?
May 2, 2012
We've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
I am using AuotCAD Architecture 2012 and suddenly the Xref/Block Object List dialog box stopped opening when I use the XLIST command. How Can I get this back?
BlockTableRecord.Position gets the position of the block in its owner. So if it is a nested block, it gets the position inside the parent block.
I want to get the position of a nested block in the space (model or paper). One way of doing this is getting the location of that parent, and if the parent is also nested, get that position and so on...and then calculate the position of the nested block.
I've created a number of spaces, and I want the space name to show up in a Room schedule. Here is a picture of the Properties window with one of my spaces selected. The space name is 'Spanish 2'. see first attachment
I understand I need to add a column to my room schedule that has this value in it. Here is an image from the 'Edit Schedule Table Style' dialog and the 'add column' sub dialog.
see second attachment
which one of this rather lengthy list is the correct one? I've tried all the values that have 'name' in them but all I get is '?' in my schedule. I've attached the file I'm working on. I created the spaces by dragging and dropping from the tool palettes out of the box, and the room schedule the same way.
I am having a problem with project based door tags getting the *ERROR GETTING VALUE*. I have checked the synchronizations and they are fine. The tags work in all our other projects, just not this one. We are also having some problems with a ? showing up for a space style in the schedule.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
When using the 'space generate' option when inserting a space, the tool automatically turns off 'object snap' and then of course it doesn't turn it back on at the end of the operation. I tend to need to switch back and forth from auto generate to polygonal insertion and having to reset object snap every time.
I am trying to create a property definition that will display the elevation of a space object. I looked through the automatic properties and did not find anything that looked like the elevation.
I have tried the following but was unable to achieve any success.
RESULT="--" On Error Resume Next Set AcadApp = GetObject(, "AutoCAD.Application") Set Obj = AcadApp.Activedocument.Objectidtoobject("[ObjectID]") RESULT = Obj.elevation
That formula does work if i swap elevation with say height, width,length or any of the properties found in the automatic property list that are a single word. I know the elevation is there I just don't know how to access it.
My question pertains to layer colors from xrefs that have other xrefs nested inside them.
When I get xrefs from the architects, I get a building layout, RCP, space layout, etc. I tie all these together into a single "architect base" xref so I don't have to attach 4 xrefs to each new file I create. What I would like to be able to do is set all the layer colors in the misc. architect xrefs in my "architect base" file and have those color settings propagate into my drawings as I create them. This comes into play especially if I have to create a new drawing late in the project, and I don't want to have to go set hundreds of layer colors individually. ?
Visretain comes to mind, but visretain (if I'm correct) is really for keeping xref color settings in your current file from session to session, not in a new file that you are creating using an xref.
How can I update the file path to an XREF which is NESTED? I point the file to the appropriate xref and even though I save the file it won't point back to the file upon opening?
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
I have two dynamic blocks. One is the plan view of a cylinder and one is the elevation view of a cylinder. When I change the parameter of the OD on the elevation, I want the plan view to change. I'd like to keep them as blocks (they're a little more complicated than just cylinders), but when I try to use parametrics to tie these two dimensions together I get: "Constraints cannot be applied between nested objects in the same block or Xref."
In Autocad Arch 2013, is there some parameter or option that will turn off the default behavior of dropping out part of the hatch or color, around a peice of text? In other words I don't what the white space that forms around a text object when I apply a hatch or color region.
The 2D drawings I am working with were exported from 3D REVIT files to 2D AutoCAD files. There are several XREFed drawings that are both mechanical and architectural from the original REVIT files that for whatever reason, the block's line weights came over with line weights of 70 in those blocks.
When I plot, the objects are a blur with the line weight so high. I tried using the command "setbylayer" but that didn't work since nested blocks still had lineweights of 70. Is there a VBA or LISP routine to run through all the blocks (including nested) that can change the line weights to a given number?
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
