I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 RepliesI've been using XCLIP for years. Never had an issue.
Today I installed 2012 and found that the ability to stretch and edit XCLIP boudaries had finally been added. SWEET!....wrong.
I was working merrily along when all of a sudden my screen blinked, refreshed, or something, and 80% of the lines within my XCLIP boundaries just disappeared.
I closed the drawing and reopened. Closed ACA and reopened. Rebooted and reopened. Gone.
If I delete the XCLIP, it all comes back. Apply a new XCLIP, gone again.
Open the drawing in ACA2011, still gone. EGADS!
Is this a totally new problem???
It literally took less than an hour after installing to find a problem in ACA 2012. My Autodesk woes continue.
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedSomehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies View RelatedTrying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
We've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
I have trouble to find the maximum work space for A4 paper size when I want 1:1 measurements on A4 paper. The stuff I draw must keep the 1:1 measurements
I want to go maximum .
I use the command -scalelistedit to clean the strange scale , i do purge , save , close and when I re-open the drawing the bad scales are back
View 2 Replies View RelatedAfter a few seconds in the program the menu with all the slides like insert,view,etc. somehow freezes. i can´t pick it anymore. the rest of the program is working,i can work on the work surface with the current tool, but choosing an ew one isn´t possible. i have this problem with different version 2011,12 and even 13....
Working isn´t possible this way.
ACA 2012
For office standards sake, I've created commands in drop menus that allow every employee to use various ‘standard’ page setups: for our plotter, printer and .dwg to .pdf. It's done with a lisp routine that basically looks up a .dwg with all those page setups already created (-psetupin).
Also, I've created 2 custom .pc3 files. The first is called 'Plotter' and the second is called 'Printer'. I did this in order to simply the task of (not) modifying our customization in the event of a dying printer/plotter. These .pc3 files are on our network and every user has access to them via an office profile, with the appropriate Printer Support File Path. We all have the same printer/plotter drivers.
Problem:Everything works fine, except for 2 employees. The lisp routine loads properly, as I can see it go in the command line and the page setup actually loads as well, as its name is in the page setup drop down menu, in the Plot menu. However, the page setup isn't 'selectable'. Also, if we try to 'preview' the plot we get this message: The selected layout has an invalid media configuration.
Every option in the page setup in as wanted (printer/Plotter name, scale, plot area, plot offset, etc.), EXCEPT for the paper size (even though the paper size specified in the lisp routine is available in the paper size list).
95% of the page setups work properly. The only one that don’t work are those for our plotter on paper sizes called ‘A1 (landscape)’ & ‘A0’.
I’ve created new .pc3 files, as I wanted to be sure they weren’t corrupted. We’ve reinstalled the printer/plotter drivers. I’ve reinstalled the office profile. I’ve checked that the paper sizes specified in the lisp routine were available in the .pc3 file.
ACA 2012
Windows 7
Intel Core i7-2600 CPU
3.4GHz - 8GB ram - 64 bit
When I open an Image in Photoshop CC the image does not appear in my work space. The tab identifies that the image is opened, layers shows the image is open, however it is not on the screen. All tools, brushes etc work, but I can't see what they are doing. I can only see the image if i click the tab and move it around. Once my mouse lets go of the image window it dissapears again. After moving it around and such it gets buggy and the image crashes not Photoshop. i have attached two screen shots of my problem. the second with the image, i have my mouse clicked, held down holding onto the window to acheive this.
View 1 Replies View RelatedACA12 - the mouse wheel doesn't work on many of the dropdowns anymore? Is this an 'improvement' or is there a new variable I need to learn to turn it back on.
Do autodesk have only 12 fonts on their machine? Why is the text style font name drop boxes so tiny? Makes it real time consuming to select a font when you have lots of fonts as I'd imagine most machines have.
[URL]
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedIn 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View Related