AutoCAD Architecture :: Annotative Blocks In Paper Space (Tab)
Feb 8, 2013
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
View 2 Replies
ADVERTISEMENT
Sep 9, 2012
I created annotative multileader, but later on by unknown reason only two shown on my drawing, others are disappear in both module and paper space, the layer didn't change, the scale didn't change. When I click one and right-click select similar and make copy or move, everything display again, after click anywhere on the screen, nothing was copied and gone again, spent long time to try to figure out but still couldn't find solution.
View 2 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Feb 27, 2012
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies
View Related
Jan 31, 2012
I’ve been given a drawing with 3 drawings w/title blocks in Paper Space, REV A, B & C. A is on the left, B is in the middle and C is on the right. It appears somebody has been printing REV B as when I select print it jumps straight to that drawing.
How would I print REV A or C? I can do it now but I have to delete the other 2 drawings so it focuses on the only remaining drawing.
View 3 Replies
View Related
Dec 9, 2013
I need to count the blocks in paper space automatically. Is there any method or lisp for this.
View 7 Replies
View Related
Nov 7, 2013
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies
View Related
Jul 28, 2009
I can select mtext in paper space to edit it. I can create a new text object and select it but I am unable to select existing mtext objects. Audit and recover does not eliminate it. Everything is at 0 elevation. The only to select it is to write block the entire drawing out. That gets sort of inconvenient. Is there a variable that is getting set like the imageframe variables that prevents me from select the text?
View 4 Replies
View Related
Jul 1, 2010
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
View 6 Replies
View Related
May 2, 2012
We've been working with adding schedule tags in paper space for objects nested within an xref. The first time you do this however, the manual properties (it seems) do not update if the value of the manual property is changed back in the xref dwg. However, the Automatic properties do seem to update.
When we initially found this we past it off as a limitation. However, one of our users was experimenting and found that the first time you tag the xref resident object... the schedule tag reads the correct manual properties value. However, If you remove the property set from the schedule tag... then the manual property will update correctly showing the current value as it is back in the xref dwg even if it is changed.
This makes complete sense as the manual property set data can be edited from either the tag or the object or from the schedule... IF THE TAG and the object are resident in the same drawing file - in this case you DO NOT want to delete the property set from the tag... if you do this the property set is also removed from the object. However, when tagging objects nested within an xref, then you need to remove the property set from the tag... THEN the manual property will update correctly.
View 2 Replies
View Related
Oct 29, 2012
My company is in the process of updating the entire block library to be annotative or dynamic (depending on the usage) and it's been wonderful for new projects.
The problem comes in when we have to update an existing dwg. When we try to "blockreplace" the new annotative tags for the old non-annotative tags. These tags have attributes, but we have literally not changed anything about the blocks except the "annotativedwg" property within the root block file. When we run block replace, the old blocks disappear completely! they're not at a teeny scale or a gigantic scale, they're not on an "off" or "frozen" layer, they just fully go away even if you say "don't purge the old block that is being replaced".
I usually don't have a problem "doing my job" and just going through and replacing them individually on the smaller sized projects, but most of our projects have upwards of 700 - 1000 tags per dwg. Slightly tedious as you can imagine, especially since I am addicted to finding newer faster better ways to draw.
View 9 Replies
View Related
Jan 3, 2013
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies
View Related
Sep 19, 2012
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Aug 17, 2012
I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
View 4 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Jul 13, 2012
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
View 4 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jul 11, 2011
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
View 8 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
Oct 24, 2012
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
View 9 Replies
View Related
Apr 4, 2012
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
