AutoCAD LT :: Annotative Multileader Disappear In Module And Paper Space
Sep 9, 2012
I created annotative multileader, but later on by unknown reason only two shown on my drawing, others are disappear in both module and paper space, the layer didn't change, the scale didn't change. When I click one and right-click select similar and make copy or move, everything display again, after click anywhere on the screen, nothing was copied and gone again, spent long time to try to figure out but still couldn't find solution.
View 2 Replies
ADVERTISEMENT
Dec 10, 2012
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
View 5 Replies
View Related
Nov 9, 2013
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
View 1 Replies
View Related
Feb 8, 2013
I have created a block in the model tab with the annotative scale set at 1'-0" = 1'-0" with the UCS set to World. When the block is inserted in model space either on the model tab or thru viewport it displays and prints correctly. However when the same block is inserted into paperspace on a layout tab the block appears correctly but when printed either hardcopy or PDF it is rotated 90 degress around its insertion. This malfunctions the same whether it is inserted directly or nested in a legend block.
It is also not one particular block or drawing but (mal)functions across drawings and block definitions.
I really don't want to have to make two sets of blocks for the project.
View 2 Replies
View Related
Dec 17, 2013
I am having issues with an Annotative Multileader skewing at different scales. It was inserted at 3/16" (1st Image) scale and when I add a 1/4" (2nd Image) scale it becomes skewed at that scale (3rd Image the leader is highlighted to show what it looks like).
3_16 scale.jpg1_4 Scale.jpgboth.jpg
View 0 Replies
View Related
Sep 10, 2012
My company has a template setup with an elevation callout for curb and gutter. The callout displays a box around two elevations (TC and G). The TC and G Labels after the elevations only show up in paper space on a 1"=1' scale, which is how the referenced block was set up. I need the labels to show up in 1:20 and/or 1:40 scale in paper space but only the elevations appear. I edited and saved the referenced block but the changes don't appear to have taken to the template.
View 1 Replies
View Related
Jul 2, 2013
I'm fairly new to using annotative objects, and I am having a lot of trouble with blocks and annotative multileaders.
I made a custom block (_ValveCallout) to be used in an annotative multileader, which was working perfectly, until I needed to edit the block I was using in the multileader. After I redefined the block, the attributes in the block seem to be displayed at the wrong scale, and the border around them isn't even showing at all. I have to redraw every multileader if I have to make a change to the block.
View 2 Replies
View Related
Feb 21, 2013
I´m having problem with annotative multileaders. They work fine while I don't move the lead point. Once I change it, the annotative scale works just on the scale that I use to transform it. In any other scale, it returns to its original position.
View 3 Replies
View Related
Sep 24, 2012
Multileader Style that is Annotative, and once it gets drag/dropped on a Tool Palette, the Annotative aspect of the style no longer is enabled when it's activated through the Tool Palette on a fresh drawing? I've looked through all the System Variables related to the Annotative family (that I can think of) and still I'm not seeing the results that I want.
I can insert these into our Client Specific Template for our internal stuff, but we kick off new jobs all the time by producing a quick "test fit" for our client.
These Tool Palettes are networked on an enterprise level so it would be a real bummer if we can't get it to work.
View 3 Replies
View Related
Jan 21, 2012
I have a drawing with some annotative blocks. ie Block name "BAR'.
If I insert another drawing (mostly old v2000 files) as a block which also contains blocks named "BAR" (which of course are non-annotative) the Blocks do not show up.
Is there any way to get arround this? Idealy I would like the old file inserted and have the annotion scale of the blocks in the inserted dbg set to the current scale.
View 1 Replies
View Related
May 30, 2013
Having some trouble with some annotative hatches. Notably ones with patterns in them? I am testing them out in multiple viewports of various scales and for the most part they work great. But every so often in a particular viewport they either disappear altogether or shrink to a smaller size and bring my AutoCAD to a dead crawl?
View 2 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
Mar 22, 2012
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
View 2 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Oct 12, 2012
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies
View Related
Jul 13, 2012
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
View 4 Replies
View Related
Feb 8, 2012
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
View 6 Replies
View Related
Aug 24, 2012
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
View 9 Replies
View Related
Jul 11, 2011
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
View 8 Replies
View Related
Jan 5, 2009
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies
View Related
May 2, 2013
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies
View Related
Oct 24, 2012
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
View 9 Replies
View Related
Apr 4, 2012
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Jun 29, 2013
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies
View Related
Dec 26, 2012
Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
View 5 Replies
View Related
May 2, 2012
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
View 4 Replies
View Related
Mar 15, 2012
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
View 4 Replies
View Related
