AutoCAD Architecture :: XCLIP Causing Lines To Disappear (Within XCLIP Boundary)
Apr 20, 2011
I've been using XCLIP for years. Never had an issue.
Today I installed 2012 and found that the ability to stretch and edit XCLIP boudaries had finally been added. SWEET!....wrong.
I was working merrily along when all of a sudden my screen blinked, refreshed, or something, and 80% of the lines within my XCLIP boundaries just disappeared.
I closed the drawing and reopened. Closed ACA and reopened. Rebooted and reopened. Gone.
If I delete the XCLIP, it all comes back. Apply a new XCLIP, gone again.
Open the drawing in ACA2011, still gone. EGADS!
Is this a totally new problem???
It literally took less than an hour after installing to find a problem in ACA 2012. My Autodesk woes continue.
View 2 Replies
ADVERTISEMENT
Jan 2, 2014
So I have a reference that has been xclipped. We have multiple drawings that need to be xclipped using the same boundary. It is a HUGE boundary and very complicated. It would take me at least half a day to recreate it (the time it took me in the first place). I copied the drawing and am trying to find a way to essentially explode the boundary in order to create a new polyline. I don't care about the reference, I just want the boundary.
View 2 Replies
View Related
Oct 24, 2012
I have drawn a special brick pattern that I need to use at the hatch for a three story building. The idea was to draw the pattern on a large scale and then use xclip or clipit to crop the pattern to the openings in the wall, i.e. windows, doors, etc. The polyline that I'm using to clip the brick pattern block is quite complicated. When I use it to clip the block, stray lines appear OUTSIDE the boundary. The xclip frame does match the boundary I want. Note, the entire block isn't appearing, just a row of lines here and there. It's obviously a glitch of some sort.
View 1 Replies
View Related
Dec 19, 2011
How to make the Xclip selection boarder line to disappear.
View 2 Replies
View Related
Dec 15, 2013
explode xclip block while keeping the stuff inside the clip boundary as it is
View 9 Replies
View Related
Nov 7, 2013
I have found that since installing the service pack for 2014, xclips in paper space have become blank, or, on occasion, 1 will show, but others won't. The invert still works, strangely enough.
View 1 Replies
View Related
Sep 16, 2012
I have an xref that I am trying to xclip. Normal xclip works fine, but when I try to invert the clip (which I was I need), a light grey background shows up (in preview mode and on prints) around most of the boundary, and takes up most of the screen.
It also clips objects from other xrefs along the plane of the boundary, even though they're not actually within the boundary (they are visible in the drawing, but clipped in preview mode). I have purged and audited both drawing and xref.
View 1 Replies
View Related
May 7, 2013
Im now using Autocad 2013 and when I click in the open area of the drawing the xclip windows from the many xclipped block in the darwing all highlight at once. See example attached It is very distracting. Is there a way to turn that feature off?
View 9 Replies
View Related
Apr 3, 2013
I know to get the spacial filter on an xref to get the clip verticies, but not how to tell if its an invert xclip.
Even the arx guys seem to have difficulty with this. How to do it with lisp, com, or arx code?
[URL] ......
View 1 Replies
View Related
Jun 7, 2012
I'm trying to hatch floor patterns in suits. I draw a pline aroudn perimeter. There are a couple of problems.
First, when I do a hatch by selecting the pline ("object"), it doesn't detect islands, such as our room tag. This is likely because the hatch is over an xref (the suite is an xref, room tag and pline are not), and hatches don't seem to like xrefs.
Next option is to hatch by "pick points". When I do that, and select a point on the floor of the suite, all of a sudden an old xref or xclip appears in 2 locations, and the hatch boundary takes the lines from that new xref into consideration. The crazy thing is that this xref does not exist in any form in the drawing. I have purged/audited the drawing, and the drawing no longer even exists in our computer.
View 4 Replies
View Related
Oct 10, 2013
What is causing my EG Data Reference Surface to disappear on screen and Profile goes to crap? I've noticed this twice on same project in separate drawings. If I go to Toolspace and synchronize then it appears back on screen.
First dwg: I created a Pump Station Site Plan and data referenced in my surface and pipe network. I save and close then reopen and EG is gone until I synchronize.
Second dwg: I created a Railroad Crossing Exhibit showing plan and profile. I data referenced in my surface and pipe network. Same thing...save, close, reopen and I have to synchronize it to have plan and profile to appear ok.
This isn't good when I have .dsd files that I typically plot my drawing package from. I sent multiple sets of drawings to the plotter and all my Pump Station Site Plans were missing the surface contours. For this sheet, I had to synchronize and send separate plots just to have contours appear.
View 5 Replies
View Related
Jan 25, 2014
I am running Windows 7. Recently upgraded from LR 4 (which was always stable for me) to LR 5. I have the application on one drive and my catalog and previews on a separate SSD drive. Anytime I run lightroom 5, after a little while (10-15 minutes), the drive with the catelog and previews is no longer accessible or even viewable from windows explorer. I've never had this trouble with any other program and the only way I've been able to see the drive again is by restarting my computer.
View 5 Replies
View Related
Jun 25, 2011
I'm currently attempted to simulate a piece of clothing, however, everytime I hit the simulate button it straight up disappears without warning and it's gone until I "Reset" its state again. I don't know what to do. It's currently set up at default settings with a plane as the collision and the piece of clothing as the cloth.
View 9 Replies
View Related
Dec 18, 2012
Ever since the latest update to PS CS6, when I add a simple effect to a text layer, like emboss, the working image disappears when I zoom in and out. Also, the layer effect does nothing to the type. It's almost like a dispay issue. When I turn the layer effect off, my image is visible again.
View 1 Replies
View Related
Sep 26, 2012
Any way to convert area boundary lines to room separation lines?
View 1 Replies
View Related
Dec 13, 2013
Using Autocad 2014. I recently changed our dimension style fill color to background. Now when we create pdf files, there are random lines either to left of the text or left and top of text. It is not every dimension. We had it set to none before and would trim lines around dimension text. We did not have problems with pdf until changing the fill color. It plots from autocad to plotter without a problem.
View 2 Replies
View Related
Jan 23, 2012
Is there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
View 2 Replies
View Related
Jun 18, 2012
is this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies
View Related
Mar 22, 2013
I'm using ACA 2013.
While in a view I make a "New Model Space View". After I tag this MSV it seems that being able to see the border of each MSV that is in my view dwg would be a useful thing. Is there anyway to turn this boundary on?
View 5 Replies
View Related
Apr 8, 2013
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
View 1 Replies
View Related
Jul 30, 2012
Can we add guide lines to surface patch boundary ?
I dont see any guide line option. The only options are G0,G1 & G2 continuty.
Link
add guide lines like in a Loft?
C1
Inventor Professional 2013
Vault Collaboration 2013
View 2 Replies
View Related
Aug 1, 2012
So I've been creating a building and I can't seem to get rid of (or hide) the lines that make up the edges of my surfaces (or solid) in the animation view. Is this typical?
For instance, I have one side of the building that is using 4 different textures all on the same plane and they butt up to one another (example: brick meets siding). Where these two surfaces meet the lines that makes up the edges of the surface won't go away. Thus always showing white line showing the boundaries o the individual surfaces.
Can I turn these off, hide them, or am I being a total 3D Modeling noob and missing something basic?
View 3 Replies
View Related
Oct 25, 2011
I though maybe this was a 2010 issue, but here I am in a brand new 2012 setup and experiencing the same problem. For some reason, my toolpalettes disappear on startup and sometimes when switching between projects. I have my workspace saved with the following anchored to the left side of the screen: Properties, External References, Layer manager, Project Navigator
Design Center, and Toolpalettes. When I close Acad (or it closes itself) and restart, sometimes the tool palettes are there and sometimes not. All of the other palettes are there save that one. They also have a habit of reordering themselves if you pin one open and the minimize it it drops to the bottom of the page. Very annoying when you think your PN is at the top, and it isn't, but i digress.
I am working with Windows 7, 64bit, dual screens. This happens with equal frequency in both 10 and 12. (Working in 12 to develop rollout for office and working out kinks. No I do not run them both at the same time.)
One more clue, I noticed in the command history that TOOLPALETTES loads and is followed imediatly by _ToolPalettes.
View 4 Replies
View Related
Oct 17, 2012
Soms of the objects in my 3D view "disappear" when clicking on it. The edges are still visible while the rest of the objects get invisible. This is only the case for some objects in my 3D view. I have no problem with the visibility of the objects in the structural plans or elsewhere. How can I make all objects visible in 3D again when clicking on them?
View 3 Replies
View Related
Feb 18, 2011
I am a computer technician in a society that uses AutoCAD Architecture 2010.I'm having some problems with the software.
First problem:
On the computer of one of our users, the profile created in Autocad suddenly disappears :-(. We do not know why ... The user is obliged each time to recreate his profile, reconfigure all toolbars .Have you ever encountered this problem?
Second problem:
On another computer, from time to time the delete function of Autocad is no longer functional. We need each time between Pickfirst = 1 and that works.How to ensure that this function does not disappear?
Third problem:
On another computer, the user activates the 3D profile, he selects his palette, and when he clicks on the "more"window, autocad error appears "Error Report Autodesk,..." . Is it possible to display all palettes?
View 2 Replies
View Related
Jun 15, 2013
I have a building plan that needs to be in 1:100. When put my drawing into the new layout its there. Then when I change the scale, my drawing disappears.
View 3 Replies
View Related
Nov 23, 2012
I crop a picture and when I print it white lines appear on the print . When I print the uncropped version of the same picture I get no lines . How can I get it to stop.
View 4 Replies
View Related
Aug 24, 2013
I have a problem when exporting to pdf, i get grey boundary lines from some selections i have made and filled with white color. The bagground is white, so that's not the problem.
The funny thing is, when exporting to any other image type, i don't get the lines, it's only with pdf.
View 3 Replies
View Related
May 24, 2012
I have the beta installed but I also installed the trial of CS6 on another computer.. Both do the exact same thing with the Adaptive Wide Angle filters. I set a line as straight, mark as vertical (2 lines really) and then process. The lines that are vertical come out wavy... best way to describe it..
I add the 2 control lines to the very outside most windows where the windows meet the brick... This is a closeup of the output... I don't know when straight lines became waveforms.. but they do with this filter!
View 2 Replies
View Related
Oct 16, 2013
Having an issue where in a part model with the view set to "wireframe with hidden edges" the edges and hidden edges disappear when you try to zoom in on the part. Actually not working with "wireframe and visible edges only" at any zoom level either.
The edges are there and I know that there are features that should be showing up as hidden.
Running Quadro FX 3800 with the most current drivers, and I only noticed this when switching to IV 2014.
Also running IV Build 222 SP 1
This is making designing very hard as I can't tell anymore where there are instances of features interfering with each other.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
View 3 Replies
View Related
Nov 9, 2012
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
View 9 Replies
View Related
