Revit :: Area Boundary Lines To Room Separation Lines?
Sep 26, 2012Any way to convert area boundary lines to room separation lines?
View 1 Replies
ADVERTISEMENT
Revit :: Draw Filled Region Boundary Lines That Show Up In Any Color?
Jan 23, 2012How to draw filled region boundary lines that show up in any color other than gray? it is hard to distinguish the lines I am drawing from the lines that are already there while creating or modifing a boundary. Can I change the color of the Invisible Line (can't find that line modify)? OR does every line created thru manage line style have to have a weight (am I able to make a zero line weight or even a pattern that shows nothing.
View 1 Replies View RelatedRevit :: Room Boundary For Curtain Walls?
Nov 7, 2013Is it possible to get the room boundary line in a curtain wall to be set to the inner face of the mullion instead of the inner face of the glass?
I have looked at the System family library but cant find a setting for changing this.
Also, setting the location line is greyed out. Why?
If I draw clockwise I get the location line on the inner face of the glass even if the greyed out location line setting in the options bar is set to center.Why?
Revit :: Convert Detail Lines To Non Plotting Reference Lines Or Planes?
Jan 18, 2014How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies View RelatedRevit :: Room Area Calculations
Aug 15, 2012I have been dealing with a tolerance issue when trying to create room area calculations in Revit. There seems to be a tolerance that is set to somewhere under 9" if two walls are to close together it will ignore the area.
Although if you are using the area calculation this tolerance is set much finer. and it seems to work just fine. I have already tried to create a multicategory schedule but cant combine rooms and areas. I have attached an image .
Revit :: How To Show Dimensions For Any Room In Plan / Instead Of Default Area
Apr 27, 2012how to show dimensions for any room in plan , instead of default Area (SQ FT)
For example ....BEDROOM 10' 3" x 10' 0"
GIMP :: Boundary Lines On PDF?
Aug 24, 2013I have a problem when exporting to pdf, i get grey boundary lines from some selections i have made and filled with white color. The bagground is white, so that's not the problem.
The funny thing is, when exporting to any other image type, i don't get the lines, it's only with pdf.
Photoshop :: How To Make Interior Shoot (room) Have Straight Lines In CS6
Jun 3, 2013I shot an interior. How do I get the lines of a room straight? I used the straighten tool in the cropping area but one side get straight and the other is off.
View 16 Replies View RelatedPhotoshop :: Make Straight Lines? Horizontal Lines? Vertical Lines? Curves?
Aug 17, 2003how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedAutoCAD Inventor :: Guide Lines To Patch Boundary?
Jul 30, 2012Can we add guide lines to surface patch boundary ?
I dont see any guide line option. The only options are G0,G1 & G2 continuty.
Link
add guide lines like in a Loft?
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCad 3D :: Surface Boundary Lines Won't Go Away In Animation View
Aug 1, 2012So I've been creating a building and I can't seem to get rid of (or hide) the lines that make up the edges of my surfaces (or solid) in the animation view. Is this typical?
For instance, I have one side of the building that is using 4 different textures all on the same plane and they butt up to one another (example: brick meets siding). Where these two surfaces meet the lines that makes up the edges of the surface won't go away. Thus always showing white line showing the boundaries o the individual surfaces.
Can I turn these off, hide them, or am I being a total 3D Modeling noob and missing something basic?
Illustrator :: Black Boundary Lines When Placing Image
Nov 17, 2013I am making a business card in Illustrator 6.
I placed an image of my black signature with transparent background on the white background business card, and now it is leaving a box were that signature image canvas ends. This happens with both a .psd and .pnd files.
Now if I could just go into photoshop and extend the canvas and leave the image the same size that would be great. When I try to do this though there is still the old canvas boundary line.
If I was able to start all over I would have had the original canvas size way wider than the image of my signature that I drew on it. That way it's boundaries would now be outside of my business cards boundries and I would not be seeing those black boundary lines.
AutoCAD Architecture :: How To Change Appearance Of Lines In Room Finish Schedule
Jun 28, 2012How to change the appearance of lines in a room finish schedule? I want to be able to have some appear bold, others to be a double line, and some to be thin? Currently when i load the standard room finish schedule the lines are not what i want them to look like.
View 1 Replies View RelatedRevit :: Why Create Area Schedule Of Areas As Opposed To Using Room Areas
Sep 22, 2011What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies View RelatedRevit :: Why Room Tool Doesn't Recognize A Simple Room Delimited By Walls
Aug 30, 2012I have a project in wich rooms functionality is compromised. I don't know why the room tool doesn't recognise a simple room delimited by walls whose property divides rooms is set to yes. If I place a rectangle of rooms delimiters the room tool works properly instead. If I start a new project the tool works properly.
View 1 Replies View RelatedAutoCad 3D :: 2D Circle Jagged Lines - 3D Model Hidden Jagged Lines / How To Get Smooth Lines
Oct 5, 2012Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
Illustrator :: Fill Area Between Two Lines?
Aug 30, 2013I made two lines with the arc tool, but how I can fill the area between the two lines red ? [URL]
View 2 Replies View RelatedAutoCad 2D :: Getting Area Of Quadrangles That Are Being Crossed With Two Lines
May 16, 2013As the first picture presents:
1.Only some of the quadrangle are being crossed with two red lines
2.Numbers, quadrangles and red lines are in separate layers
I need to do the following thing:
1.Make sure that all quadrangles are closed and that each quadrangle has one number inside of that closed area.
2.Get a list of quadrangles that are being crossed over with two red lines (the space between two red lines is the one that counts) (for this example I must get: 500, 501, 505, 506, 507, 50
3.Find out the area of each given quadrangle in step 2. (for example 500 – 1360.32, 501 – 4056.42, 505 – 5050.03 etc.) and hatch each one of them (it would be nice if I could automatically find out the number of hatched quadrangles – for this example: 6).
So the final result should be: in CAD as in picture 2 with number of hatched objects: 6 and in a file that is excel/notepad readable as in picture 3.
[URL].........
Illustrator :: Area Type Box - Justify All Lines
Oct 23, 2012I want to create an Area Type box and have all of the text line up on both the left and right sides, so I use the Justify all Lines option.
1. After doing this, is there a way to adjust the spacing of the headline? I tried adjusting the tracking, though that didn't work. Is the only way to use a separate Area Type or Point Type for the headline so it is not affected by the Justify all Lines option?
2. Is there another way to acheive what I want?
AutoCAD Architecture :: XCLIP Causing Lines To Disappear (Within XCLIP Boundary)
Apr 20, 2011I've been using XCLIP for years. Never had an issue.
Today I installed 2012 and found that the ability to stretch and edit XCLIP boudaries had finally been added. SWEET!....wrong.
I was working merrily along when all of a sudden my screen blinked, refreshed, or something, and 80% of the lines within my XCLIP boundaries just disappeared.
I closed the drawing and reopened. Closed ACA and reopened. Rebooted and reopened. Gone.
If I delete the XCLIP, it all comes back. Apply a new XCLIP, gone again.
Open the drawing in ACA2011, still gone. EGADS!
Is this a totally new problem???
It literally took less than an hour after installing to find a problem in ACA 2012. My Autodesk woes continue.
AutoCAD 2010 :: Lines Not Smooth On Work Area?
Nov 21, 2012while tracing a plan on Autocad 2010, by accident I clicked on something, or performed some unknown commands. My lines, that were smooth just seconds before, suddenly became really pixelated, as if made of many small segments. And when rendering the plan on pdf, it is still the same, and the lines are really thick. I have checked, the line thickness is on default (0.25mm), but compared to renderings I've done before, this time the drawing has really awful lines.
View 3 Replies View RelatedIllustrator :: Cannot Change White Lines In Border Area
Jun 11, 2012I can change the dark color in the border to any color I want using the stroke color. But I can not change what appears to be white, the area surrounding the darker color, in the border, to any other color. If I change the fill color it changes the gold colored area. All I want is to change the white lines in the border area.
View 3 Replies View RelatedAutoCad :: Dashed Lines Showing Up As Solids In Layout Area And When Plotting
Mar 24, 2011I guess the title pretty much says it all Dashed lines in my drawing turn solid when i switch to the layout area, and when i try to plot. I've tried fiddling with line type scale, but it hasn't solved the problem. I've attached one of the drawings i'm having trouble with.
I think i might have figured it out, when i set lts to 0.05 the show up fine in the layout area, but in the drawing are it looks like the line type scale is way too low. why the dashed lines don't show up the same in the drawing and layout areas?
AutoCad :: Delete Any Lines From Related Hatch Portion Object Area
Nov 16, 2011i have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedRevit :: Cannot Get Rid Of Beyond Lines
Apr 16, 2012Beyond lines displaying for walls of floor below and cannot get rid of - view range is set with bottom offset at floor level, cannot override beyond line style and nothing else I can find to turn them off. Its walls, door openings (not symbolic lines etc.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Intersect Between Two Lines Using Start And End Values Of Two Lines
Oct 11, 2013With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
AutoCad :: Hidden Lines Viewbase Option To Shaded With Visible Lines Mode?
Oct 11, 2012Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedAutoCAD 2010 :: Plotting Lines Using Compass Direction For Lines Angle
Apr 25, 2012i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
AutoCAD 2010 :: Wipeout To Turn Continuous Lines Into Dotted Lines?
Apr 23, 2012I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
AutoCad 2D :: Make Center Lines Intersect On Lines And Not On Free Spaces?
Oct 26, 2011what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View RelatedAutoCAD Inventor :: How To Automatically Show The Tweak Lines Or Center Lines On Explode Path
Dec 16, 2011I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013