AutoCAD Architecture :: Using Detail Boundary And Model Space Views?
Apr 8, 2013
I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
View 1 Replies
ADVERTISEMENT
Mar 22, 2013
I'm using ACA 2013.
While in a view I make a "New Model Space View". After I tag this MSV it seems that being able to see the border of each MSV that is in my view dwg would be a useful thing. Is there anyway to turn this boundary on?
View 5 Replies
View Related
Jan 23, 2012
Is there an easy way to use space to generate a ceiling grid. My predicament is that when I create a space, the lines show up in Medium Detail and I have to switch to Reflected display configuration to see the grid. But when I am putting in the grid it asks me to choose the space, which is now not visible. Unless I change the display configuratiion, is there a way to pick the space while in the reflected display configuration.
Or better yet, is there a way to create a script that will toggle the space display on and off while in reflected.
View 2 Replies
View Related
Jun 18, 2012
is this possible? we want to have our ceilings in separate constructs in order to have two people working at the same time
View 1 Replies
View Related
Jun 19, 2012
I have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies
View Related
May 19, 2011
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies
View Related
Apr 5, 2013
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies
View Related
Feb 27, 2012
Somehow the two tabs which were located at the bottom of the screen in my version of Autocad 2008 have dissapeared. I used them extensively and would like to get them back. I've tried the solutions provided in previous answers without success. The menus which are supposed to appear don't.
View 4 Replies
View Related
Aug 30, 2011
Our customers insist that we provide our drawings in AutoCAD format and that the drawings have the views in paper space (layout) as well as the full scale view in model space. We are using an Inventor dwg to satisfy the requirement for AutoCAD format but I am not sure if we can get all of the views in model space and paper space without saving as an AutoCAD dwg and creating a viewport. I have used the "Insert in Model Space" command when you right click on a view, but this will only insert one view and then the command is no longer available. Is there a way to add all of the view to model space using this command?
View 6 Replies
View Related
Oct 8, 2012
I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies
View Related
May 21, 2012
I am looking for a way to insert links to views in Autocad in model space.
View 3 Replies
View Related
Jul 1, 2013
I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies
View Related
Apr 27, 2012
on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
View 3 Replies
View Related
Mar 5, 2012
We have a bit of an urgent situation at work. Namely we have stepped over from standard AutoCAD 2010 to AutoCAD Architectural suit 2012.
The situation is as such that if we set our search path to our ctb and our dwt (nothing else no other search path changes) our dwt templates load as being visibly black/white all the colour information is wrong.
Upon closer inspection of elements draw in the dwt for example a line though it still displays as being physically black/ white the properties menu declares it as being the colour we need it to be for example red. We have double-checked in our plot dialogue box if the ctb is present and its presence is confirmed. The peculiarity is though if we try and locate it using our (findfile “CTB\NAME\AND\PATH” method the command prompt returns nil meaning as far as I have come to understand as missing/ not loaded/ not found. A line the properties menu states the plot style is set to ByColor and not by the specific CTB file as when the same line is selected in AutoCAD 2010.
We have quite an extensive customisation comprising almost of every kind of file AutoCAD has put up for user customisability so my instinct was that something within the whole customisation was causing our issue.
We have since rid of all customisations and reset the profile using AutoCAD and as double backup also via the registry keys, we also have deleted our corresponding AutoCAD application folder in the hope of eliminating some nasty that may of stayed behind.
We have no plug-ins that cannot be the problem. Further experimentation shows that if we create a search path using the following lisp the colours are displayed right for the duration of the AutoCAD session but upon restarting AutoCAD the colours again become black/ and white.
When entities such as the lines are moved the items being moved flicker across the screen in their correct colour, once placed the image instantly shows as being black/ white again.
As final symptom our model space colour seems to be the only thing effected, our layout tabs are fine however we don’t work in layouts but rather in model space.
I have also as last used the vars2src command in AutoCAD 2010 and imported the variable settings into AutoCAD architectural suit 2012 hoping that the issue was a variable setting overlooked, to no avail though. Neither is our desktop icon enabled with any switches such as profiles.
View 1 Replies
View Related
Jul 9, 2012
We have had a reoccuring problem in autocad architecture 2012 where model space views can no longer be dragged into a sheet. It just shows a circular cancel icon.
The sheets are set up fine and it may even have several MSVs already in place then out of no where the ability is lost. We have tried allt he usual fixes (checked the layers, restored the .bak file, tried on other computers, installed service packs) but it seems once the file is "poisoned" the only fix is to recreate the sheet and delete the old one. Not a terrible solution but it is not efficient.
We have a dozen computers all with acad architecture 2012 and it seems to happen on random computers and we can't pinpoint any specific differences between them.
We did not have this problem with Autocad architecture 2009.
It could be something with the project database.
View 2 Replies
View Related
Aug 29, 2013
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
View 2 Replies
View Related
Jul 1, 2010
Trying to finish someone else's half finished project done in acad 2007. I'm working in Architecture 2009. I just opened a sheet template, xreffed the file into a viewport, and whenever I switch from model to paper space or back I get this message-
Cannot find the resource string number 25900 in resource AecXDisplayPropsData50-
View 6 Replies
View Related
Oct 27, 2011
We're testing some new machines running Windows 7 64-bit with both AutoCAD Architecture 2011 and 2012 64-bit installed.
When dragging and dropping a model space view onto a sheet, instead of the folder with paperclip symbol, we're getting a circle with a line through it prohibited symbol. This only occurs when our project files are on our network. When we use them on a local machine this does not occur.
We cannot drag and drop onto new sheets either.
[URL]
We are running on a Novell Linux Open Enterprise Server network. We previously had a problem with not being able to open any sheets if another drawing was open, which we resolved by disabling Novell File Caching. We are also now experiencing unhandled e06d7363h exception errors with any type of file access in the Project Navigator. This crashing also does not occur when the files are on the local machine.
View 5 Replies
View Related
Oct 11, 2011
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
View 4 Replies
View Related
Apr 19, 2012
I know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
View 8 Replies
View Related
Nov 6, 2012
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
View 3 Replies
View Related
Oct 23, 2013
How to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies
View Related
Jan 23, 2013
Inventor 2012, in an *.idw, can you make the detail boundary box square? I see there are two options for two different circles but not an option to make it square. Is it not possible or am I missing something?
View 2 Replies
View Related
Sep 11, 2006
Inventor 11 - Sp1
Why is the scale of my Detail Boundary line different than my Section Line scale? I have set the global line scale so that hidden and section lines look OK, but the detail boundary line spaces are so close that it prints as a continuous line. I am using the same line weight and line type for both detail and section lines.
View 5 Replies
View Related
Oct 1, 2013
How to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
View 5 Replies
View Related
Nov 25, 2013
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
View 3 Replies
View Related
Jul 25, 2012
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies
View Related
Jul 1, 2012
Is it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
View 1 Replies
View Related
Sep 20, 2012
Is there any way to control the priority of what information Inventor displays "on top" in a drawing when you have two elements that overlap?
My specific situation is I have a text note whose boundary (where the text 'box' would be if that was turned on) overlaps a detail of a section view and seems to be preventing the display of the hatch layer in one of my section views.
I have attached 3 pictures to show this problem. The pictures show the section view in 3 slightly different positions relative to the text box. I selected the text box before taking the screen capture so you can reference the green "handles" to know where the boundary of the text box would be. Notice how the hatching of the welds, flanges, and pipe as well as a portion of the extension line and arrow for the 3/16 dimension are 'covered' by the boundary of the text box.
Is there a way to control the priority in which different layers are displayed, or is there a function similar to the "Bring Forward/Send Backward" options in Microsoft Word?
FYI, I am running Inventor 2013 RTM build 138.
View 1 Replies
View Related
Mar 26, 2013
im trying to make an template we can use as default template..
now when i make a section view or a detail view of a part, the annotation is placed above the section view..
I would like to have that underneath the view.
I know can drag it down there, but is there a way to have the annotation underneath the view when its created? would save me and the rest who is going to use the template a lot of time..
View 2 Replies
View Related
Nov 6, 2013
When i set a specific Plane in my new Level of Detail (Right click on the box set this view as "top") and save, i switch back to master and now the view from the new level of detail transferred over.
How can i make custom top,front,right niews for my new level of detail so it wont affect other details (especially my master view).
View 8 Replies
View Related
