AutoCad :: Insert Links To Views In Model Space
May 21, 2012I am looking for a way to insert links to views in Autocad in model space.
View 3 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Orthographic Views In 2D Model Space
Jun 19, 2012I have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Inserting Views Into Model Space
Aug 30, 2011Our customers insist that we provide our drawings in AutoCAD format and that the drawings have the views in paper space (layout) as well as the full scale view in model space. We are using an Inventor dwg to satisfy the requirement for AutoCAD format but I am not sure if we can get all of the views in model space and paper space without saving as an AutoCAD dwg and creating a viewport. I have used the "Insert in Model Space" command when you right click on a view, but this will only insert one view and then the command is no longer available. Is there a way to add all of the view to model space using this command?
View 6 Replies View RelatedAutoCAD 2010 :: Rotating Views In Model Space
Oct 8, 2012I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedAutoCAD Architecture :: Using Detail Boundary And Model Space Views?
Apr 8, 2013I'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
AutoCAD 2013 :: Using Batch Plot From Views Set Up In Model Space?
Jul 1, 2013I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies View RelatedAutoCAD Civil 3D :: 2012 - Freeze In Model Space Switching Between Isometric Views
Apr 27, 2012on a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
AutoCAD Inventor :: Insert In Model Space On 2014
Jun 5, 2013I'm a current user of Inventor Professional 2013 and am in the process of migrating over to 2014, I've got almost everything sorted and am really liking some of the new features.
However, I have a major problem which is preventing me from using the new software full time. Have asked around and done several google searches but no one can provide an answer.
Basically, I send a lot of my drawings out for Lazer cutting, and they require a model space dwg file for there laser cutting machine, when I right click and select "Insert In Model Space" like I always did in 2013, and 2012 and all previous versions it worked fine and then can see the profile in model space tab. In 2014 however I get the error message "Invalid input for request". And nothing happens.
AutoCad :: How To Insert Title Block From Model Space
Jun 20, 2013How to insert a title block from MS and fit to the PS without affecting the scale?
View 9 Replies View RelatedAutoCAD Inventor :: DWG / Insert In Model Space Fail With 2014
Jul 8, 2013insert dwg view in model space with Inv 2014.
I try here and i receive this error " invalid input for request" If i try with 2013 it's work well.
INV PRO 2014
MS Office 2007
Win 7 pro, core i7 950, asus P6T WS
nvidia Gforce GTX 295
WD caviar black 500Go
WD caviar black 1To
AutoCAD 2010 :: When Insert Xref In Model Space - It Shows In Angle
Mar 28, 2012I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies View RelatedAutoCad :: Insert Separate Files In Model Space In Essence Creating Multiple Cut Lists For Drawing
Feb 22, 2013working with acad 2012 and not having good luck with links and functionality with excel. tried the links manager,pasting excel/entities. trying to insert separate files in model space in essence creating multiple cut lists for the drawing. Is there a tutorial that goes in depth with this? just froze one file at work, lucked out and opened at home. Each cut list is an individual worksheet, which may be the problem.
View 1 Replies View RelatedPhotoshop :: How Do I Insert HTML Links?
Apr 20, 2006How do I insert HTML links to my jpeg image. I know I must be in Image Ready, but I can't find the tool to select my area that will be linked.
View 5 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCAD 2013 :: Toggle From Paper Space Into Same Zoomed Area Within Model Space
Oct 5, 2013Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedAutoCAD Civil 3D :: Dynamic Blocks Showing In Model Space But NOT In Paper Space
Mar 22, 2012I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedAutoCAD 2013 :: Transfer Model Space Drawing Into Paper Space?
Feb 15, 2013how do I transfer model space drawing into paper space ?
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: X Y Coordinates From Model Space On Paper Space?
Nov 5, 2013I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
AutoCAD LT :: Model Space Hatch Hiding Paper Space Multileader
Dec 10, 2012I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
AutoCAD Architecture :: Copy Objects From Model Space To Paper Space?
May 19, 2011is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedAutoCAD 2013 :: Switch Object From Model Space To Paper Space
Oct 12, 2012I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedAutoCAD Architecture :: Dimensions Show On Model Space Not On Work Space
Apr 5, 2013Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedAutoCAD 2013 :: Paper Space Viewports - Wipeouts In Model Space
Jul 13, 2012I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
AutoCAD Map 3D :: How To Get From Paper Space To Model Space While Converting Scale Properly
Feb 8, 2012I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
AutoCad :: Text Doesn't View In Same Model Space / Paper Space
Aug 24, 2012ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
AutoCad :: Referencing Title Block From Model Space Into New Tab Of Paper Space
Jul 11, 2011I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
AutoCad 2D :: Bring Paper Space Object Through Viewport Into Model Space
Jan 5, 2009What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedAutoCad :: Copy Text From Paper Space And Paste Into Model Space
May 2, 2013I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedAutoCad :: Locking Out Model Space While Editing Text In Paper Space
Oct 24, 2012I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
AutoCad :: Objects Are Yellow In Model Space And White On Paper Space?
Apr 4, 2012how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedAutoCAD 2013 :: Importing Paper Space Layout And Model Space Objects From Dwt Into A New Drawing
Oct 4, 2013I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View Related