I have a 2D drawing in model space that is set on the front orthographic view. If you change it, using the viewcube, to "top", the drawing appears as a straight line because it is now looking at a top view of the 2D drawing. How can I change it so that the top view will display the whole drawing?
View 2 Replies
How to get orthographic views from a 3d model?
View 9 Replies View RelatedOur customers insist that we provide our drawings in AutoCAD format and that the drawings have the views in paper space (layout) as well as the full scale view in model space. We are using an Inventor dwg to satisfy the requirement for AutoCAD format but I am not sure if we can get all of the views in model space and paper space without saving as an AutoCAD dwg and creating a viewport. I have used the "Insert in Model Space" command when you right click on a view, but this will only insert one view and then the command is no longer available. Is there a way to add all of the view to model space using this command?
View 6 Replies View RelatedI have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedI am looking for a way to insert links to views in Autocad in model space.
View 3 Replies View RelatedI'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
I've never used batch plot before but I have a file that has multiple views set up in view manage in model space that I need to print. I've found instructions on how to do it from paper space but not model.
View 4 Replies View Relatedon a couple of my lager project i have recently had issues with Autodesk Civil 3D 2012 Freezing in Model Space switching between Isometric views. the number of view changes varies each time but seams to freeze during regen of the model.
I have checked the performace tuner and updated my driver, see Attached Log.
We are in the process of changing our CAD Stations over to Windows 7 64 bit, but im not scheduled for a couple more months.
System:
Dell Precision T3400
Windows XP SP3 32 bit
Intel Core2 Quad (Q9550 @ 2.53GHz)
4GB RAM
recently i tried working with the modeling toolkit in maya 2014, and it works great in perspective,but for some reason when im in component mode and I try and make a marquee selection, the marquee does not show up although it does select the component.
After selecting some component and try moving then with the translate handles, it does not move at all, instead it deselect the components.I am able to middle click move components.
So i decided to turn off the modeling toolkit and everything worked fine with the classic manipulators.
I have a finished 3D model in AutoCAD (although I did import it from another program), and I want to create the standard orthographic views as easily as possible. This tutorial looked perfect [URL].........
but i ran into some trouble. At step 5, where it says to press Base or use the command VIEWBASE i get a window that will ask me to open up some kind of inventor file. The tutorial does not acknowledge this, but the rest of the instructions and result seem like just what I need!
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedI'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedCAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedWile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
