Inventor 11 - Sp1
Why is the scale of my Detail Boundary line different than my Section Line scale? I have set the global line scale so that hidden and section lines look OK, but the detail boundary line spaces are so close that it prints as a continuous line. I am using the same line weight and line type for both detail and section lines.
The only topic i've found is old so I would like to ask if there is a possibility nowadays to turn the scale defaulty OFF.
[URL] ......
Is it possible to scale the cross-hatching in a detail that was created from a section view so it looks better with the scale of a detail? If the scale factor of a detail is much larger than its parent, the cross-hatching is very sparse and detracts from clarity rather than adding to it.
View 2 Replies View RelatedI know I'v done this before but I'm having trouble getting a detail view to just show the jagged cut lines where it crosses the part only & not all the way around it. See images attached to show the problem.
Inventor Suite 2013 Ultimate
How does one remove the boundary box for a detail view? I don't want it sitting in my main view, as this is a conveyor and it's very obvious at to where the drive arrangement is sited. See attached.
I'm guessing changing it to another layer that does not print is one option, or?
How to use ellipse as boundary for detail view? I can only see rectangles and circles as my choices.
View 4 Replies View RelatedInventor 2012, in an *.idw, can you make the detail boundary box square? I see there are two options for two different circles but not an option to make it square. Is it not possible or am I missing something?
View 2 Replies View RelatedHow to remove the view label text which is attached to a detail boundary? I know that if you double click ont he etxt you can manually delete it from the format text window but I want edit the default setting so that it doesnt appear on creation.
See attached image.
Is there a way to break the Callout Boundary similar to the Section Line in Revit Arch 2011 ?
View 9 Replies View RelatedIs it possible to copy a section view or detail view from one sheet to another, without having to copy the base view?
If so how?
If not, why?
im trying to make an template we can use as default template..
now when i make a section view or a detail view of a part, the annotation is placed above the section view..
I would like to have that underneath the view.
I know can drag it down there, but is there a way to have the annotation underneath the view when its created? would save me and the rest who is going to use the template a lot of time..
Working with Inventor 2012: I have a rather large assembly (over 3000 parts) that was worked on by an outside engineering firm and includes several different Levels of Detail & Views under Representations. When they originally Pack 'n Go-ed the whole assembly and related .idw's over to us, all the .idw's seemed to show every view correctly without errors.
However, I've now went into the assembly and made several modifications to the overall master assembly and a few sub-assemblies within it (adding/deleting a few parts, nothing major). Now when I try to open a few of the master assembly .idw files, all the section & detail views have become full model views, losing their "cutaway" views. See the attached before & after pictures.
I've went back in to each .iam and made sure that the level's of detail & Views match the way the file was originally given to us but I can't seem to get the cutaway views back again.
Is there a way to customize the fence labels for detail and section views?
I know we can edit the label directly and add/remove text, but is there way to change the appearance of the label as well, with say a sketched symbol or other graphical representation like a balloon or other customized image?
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedI'm using project navigator and I want to use the intelligent title marks created by the Mode Space View drawing that is created when I use the Detail Boundary.
I have purchased a 5 hour block of support time on this and after 4 days they have not found a result for me and are looking to developers at this point.
My issue is this. I xref in the floor plan that I want to use to make some enlarged floor plan details out of. I have a custom high detail display configuration set for this view drawing. I use the detial boundary tool that adds the detail boundary and tag and then created my model space view with an intelligent titlemark that will then reflect the number and sheet when inserted into a sheet drawing.
The problem is trying to get this MSV to reflect what I see on the floor plan. As of now it just brings in a enlarged detail of the area but it's all the same color with no hatch detail.
I can change the result of what I get by selecting the “model space view” that I created and then going to properties and changing the “display controlled by” on the display tab of the properties of that object. If I change that to “Drawing default setting” then the result is set to whatever the drawing default settings are. It looks like the “default settings” for a 2D Section/Elevation object are “General” Display Representations.
how to get my custom “Bew_High Detail” display representation to be the default Display Representation of the “2D Section/Elevation” object then I think I would get my desired results.
I have placed my assembly onto the idw and the line weight is set up correct for the majority of the drawing, but the small details, line less than 1mm together still carry the same line weight as the rest of the drawing. They are coming out far too thick as one big fat line.
Is there a way (Automatically, not RHM change layer) to select lines that are close together to move to a different layer that has a different line weight? I dont really want to go around selecting every line close together and changing the layer or weight do I?
What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedIn a detail view, how can I change the line type? The contour of the detail view?
View 5 Replies View RelatedWhat line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
when we are taking details view ther is two type cutout shape
1.smooth shape
2.jogged shape
i need to remove or hide the cutout shape line in detail view. it is possible.
please find the attached file for detail.
I'm been unable to find what controls the display of the boundary of a section (volume type) object. A section object that does not show it's boundary, when copied to another file shows the boundary.
Same layer states, visual styles, and other setting between both files. There must be some setting I'm overlooking... but a search of the so-called help file was not very informative.
how to place a dimension on a section line as shown below. This was drawn in SolidWorks but I am trying to convert to Inventor.
View 4 Replies View RelatedOne of my draftsman is trying to put an identification Tag on one of our assembly.We made a symbol with our tag, and we put it on whatever where trying to identify directly on the presentation.
Our problem is that where not able to remove whatever is behind that symbol so that we can make that Tag readable.Is it possible to make only part of a line invisible in our presentation?
See attached,
My section lines "legs" are coming in very long in idw.
I unchecked "show entire line" and it still leaves a massive line away from the arrow.
The linetype set in the active standard for section line is totally ignored when creating a section view. We have our line type set to 'Long Dash Dot' as per the BS8888 standard but it changes it to a 'Long Dash Short Dash' line. We use the same linetype on the centerline layer with no problem. Why does this not work??
Inventor 2012 SP2
I have a section line that is missing one of the teminator arrows and the label.
I have checked the styles, tried to edit the style but cannot make the terminator and label visible.
Inventor 2013
Win7 x64
C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
Creating a linear section view from a curved line
View 5 Replies View RelatedThe objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies View RelatedI put in building section targets and detail targets. When i opened it the next day some were missing from the drawing but the building section and detail views still exist. Where did the targets go/
View 1 Replies View Related